Supplied Accessories
Check that you have the following components
in your converter pack ;
(1) 1 x Instruction Manual
(2) 1 x Transmitter or Repeater or Receiver
(3) 1 x AC Adaptor : 12VDC, @300mA
Safeguards and Precautions
A. Keep this unit away from fire, extremely hot areas, water or moisture of any Kind.
B. Do not place this unit on any support that is not firm, level and strong.
C. Do not service the unit yourself. Opening the unit's housing will void the warranty.
D. Servicing must be by Shinybow or by an authorized technician.
C. Illegal duplication of copyrighted material is strictly prohibited by Federal Laws.
Introduction
Before you make any connections
Make sure all Video devices to be connected to the CAT5 Transmitter/Repeater/Receiver are
functioning according to their respective operation manuals before connecting them. Always
connect the VGA devices to the CAT5 Tx/Rx one at a time and make sure each works just as it
did before it was connected.
Congratulatio ns on your purchase of one th e most innovativ e CAT5 Transmitte r/
Repeate r/Receiv er product on th e market Today. The SB-6110 is a transmitte r its
driv in g VGA signals over long lin es by category cable to SB-6110R CAT5 receiv er.
high performance VGA(640x480), SVGA(800x600), XGA(1024x768), SXGA(1280
x1024), UXGA(1600x1200), WUXGA(1900x1200) driving with a ADCs digita l signal.
Signals VGA and stereo audio with a maximum extensio n of 1000ft betw een
transmitte r and receiver. And use category 5 cable. The termin ato rs are Rj4 5
(Category 5) jack and VGA HD-15, Earphone ja ck.
Specifications :
VGA Resolution
SXGA (1280x1024)
Cable for CAT5,5e,6
SB-6110 (Tx), SB-6110R (Rx)
Model Number
Tx, Rx Input/output
Transmitter & Receiver
VGA/Stereo Aud io
Type of Signals
Power Consumed
SB-6110(@100mA), SB-6110R(@100mA)
Power Source
DC 12 Volts, SB-6110(@300mA), SB-6110R(@300mA)
Size (L,W,H)
2.75 in x 2.60 in x 1 in (70x66x26mm)
Net We ight (Unit only)
0.4 lbs. (0.24kg) Approx.
In/Out Terminal
Rj45 Jack, HD-15 and Ear phone Jack fem al e connect ors.
Video Bandwidth
Tx : 400 Mhz, 13dB full powe r, Rx : 270MH z 1090V/ us@G= +1
Tx slew rate
2000 V/us
Audio Frequency response
20Hz to 20KHz, +/-1db
Tx: 68dB SF DR@5 Mh z 200 load. Rx: 1 Vp-p@5 MHzW
Low di stor tion
XGA (1024 x 768)
VGA (640 x 480)
1 M differentialW
Rx High input imp edance
1000 feet
450 feet
600 feet
Distance
Video Ma ximu m input levels
3.1 Vp -p(line level)
1.45 Vp-p
Audio Maximum input levels
Safeguards and Precautions
A. Keep this unit away from fire, extremely hot areas, water or moisture of any Kind.
B. Do not place this unit on any support that is not firm, level and strong.
C. Do not service the unit yourself. Opening the unit's housing will void the warranty.
D. Servicing must be by Shinybow or by an authorized technician.
C. Illegal duplication of copyrighted material is strictly prohibited by Federal Laws.
Typical Hookup and Operation
APPLICATIONS:
TX : Video line driver, Digital line driver, Low power differential
ADC driver, Signal-ended input to differential output driver
RX : High speed differential line receivers, Differential-to-sigle-
ended converters, High speed instrumentation amps, level shifting.
Fron t:
Input : VG A+St er eo Audi o
Rear :
Output : CAT5 (Tx) Transmi tter
Power output : DC12V, @300mA
Front :
Input : 1x CAT5 (Rx) Receiver
Power Input : DC 12V, @300mA
Rear :
Output : VGA+Stereo Audio
Power output : DC12V, @300mA
SB-6110 R
RECEIVER
SB-6110
TRANSMITTER
2002/9 5/E C
RoHS
VGA Transm itter signal s :
VGA(640x480) , SVGA(800x600) , XGA(1024x768) , SX GA(1280x1024) ,
UXGA(1600x1200) , WUXGA(1900x1200)
Front View Rear View
Front View Rear View
1000 feet
VG A in
VG A ou t
Au di o ou t
Mo nitor -1
SB-6110
Ca t5 ou t
Au di o in
SB-6110R
SB-6110R
SB-6210R
SB-6310R
Installing
TRANSMITTER
RECEIVER
