Shiro SB2111 User manual

SB2111 User Guide
1
FEATURES：
a) HI/LO ringing volume selection
b) Redial, Pause, Flash and Mute function
c) Desktop/wall-mountable
OPERATION:
To hold the handset when
wall-mounted
SECRECY/MUTE Key
Press this key to mute the
mouthpiece so that the remote
party can’t hear you
FLASH Key
You would need this key on a PB
X
REDIAL/PAUSE Key
Press this key to make a repeat
call to the last number dialed.
Press this key to insert PAUSE when
dialing on a PBX.
HANDSET
!
Please ensure the phone is placed in a dry and ventilated place without
corrosive air.

SB2111 User Guide
2
1) Making and Answering Calls
To make a call, just lift the handset and wait for dial tone. Then, dial the telephone number
using the keypad.
2) Redial Function:
To make a repeat call to the last number dialed (up to 32 digits), just lift handset and wait
for dial tone. Then press LNR key.
3) Secrecy/Mute Function:
While you are on the line, if you do not want the remote party to hear you, just press and
hold the MUTE key.
4) Using on a PBX:
If you need to use SB2111 on a PBX and the PBX User Guide instructed the use of
RECALL/FLASH to transfer an external call to an internal party, press the FLASH key.
On some PBXs, you will need to wait for a second dial tone after dialing external line access
digit (e.g. “9”). You might need to insert PAUSE when making calls, so that the redial
function will work.
• To make a call:
1. Press the external line access digit and then press PAUSE key
2. Dial the telephone number
RINGER VOLUME SWITCH
To set HI/LO ringer volume
BASE UNIT