shokz OPENSWIM S700 User manual

User Guide
S700
OPENSWIM

Contents
HOW IT WORKS
How to Wear
Volume
Music Function
Check Battery Status
Headphone Controls
ON/OFF
Transferring Content
Changing Languages
EQ Modes
Changing Folder
EXTRA FEATURES
Switching EQ modes
CONTENTS
Warranty
CARE AND MAINTENANCE
Charging Tips
Troubleshooting
Storage and Maintenance
What’s in the Box
03
04
05
07
08
09
10
12
13
14
15
17
18
20
21
22
23
REGULATORY AND LEGAL
INFORMATION
01

How It Works
02

Headphone Controls
HEADPHONE CONTROLS
Volume -
Mode Button
Volume+
Multifunction/Power Button
Terminals
LED Indicator
03

ON/OFF
Turn on the headphones :
Press and hold the Multifunction/Power Button until the LED
Indicator flashes blue.
*Audrey will say :“Welcome to Shokz”
Turn off the headphones :
Press and hold the Multifunction/Power Button until the LED
Indicator flashes red.
*Audrey will say :“Power off”
ON/OFF
Multifunction/Power Button
04

Transferring Content
1. Connect OpenSwim to your computer.
2. OpenSwim will become a hard drive named “OpenSwim”.
Open “OpenSwim” on your computer.
OpenSwim
File
TRANSFERRING CONTENT
05

OpenSwim
File
WMA
FLAC AAC
MP3
WAV
3.Drag-and-drop audio files or folders into the “OpenSwim”
hard drive.
4.You may disconnect the USB Charging Cradle once file transfer
is complete. The LED indicator will flash red and blue while
OpenSwim organizes the files. The OpenSwim buttons are not
functional temporally.
* OpenSwim supports MP3, WAV, WMA, FLAC, AAC formats.
(OpenSwim only supports WAV file in Linear PCM format.)
TRANSFERRING CONTENT
06

*Wearing your headphones the wrong way could cause
discomfort. The transducers should rest in front of your
ears.
Pick up the headphones, bring them
behind the back of the base of your neck,
position the earhooks on your ears, then
enjoy your music!
How to Wear
HOW TO WEAR
07

How to change volume:
While your audio is playing, adjust headphone volume by
pressing either the volume + or volume - buttons.
Operate volume controls
while audio is playing.
Volume
*Listening with headphones at high volume may affect your
hearing and the audio will be distorted.
*A “beep” will sound when the volume is at its max.
VOLUME
Volume + Button
Volume - Button
08

Music Function
Change EQ Setting
Press and hold Mode Button
for 2 seconds
Play mode
Click Mode Button once
“Normal/Repeat/Shuffle”
Click Multifunction Button once
Play/pause music
Press and hold Volume+ for 2
seconds while music is playing
Next song
Press and hold Volume— for 2
seconds while music is playing
Previous song
MUSIC FUNCTION
Volume -
Mode Button
Volume+
Multifunction/Power Button
09

Operate controls while
audio is not playing
Check Battery Status
How to check battery status :
Click the volume + or volume - button while music is paused,
Audrey will tell you the battery status :
* "Battery high/Battery medium/Battery low/Charge me"
CHECK BATTERY STATUS
Volume + Button
Volume - Button
10

Extra Features
11

EQ Modes
EQ MODES
Swimming Mode :
For use while swimming
General Mode :
Balanced frequency for listening to music
12

Switching EQ Modes
Operate controls while music
is playing
How to switch EQ mode :
Press and hold Mode button while music is playing
until you hear a beep.
*Audrey will say :“General mode/Swimming mode”
SWITCHING EQ MODES
Mode Button
Mode Button
13

Changing Languages
Your headphones have four built-in languages:
Chinese, English, Japanese and Korean.
CHANGING LANGUAGES
How to change the language :
Press and hold both button volume + and volume - until you
hear a beep.
* Audrey will say :"中文/English/한국어/日本語"
Volume - Volume+
14

Change the Folder
*It is recommended to use different folders to categorize music.
CHANGE THE FOLDER
How to change the folder :
Press and hold both Multifunction Button and volume - until
you hear a beep.
* Audrey will say :“Play Current Folder/Play All Folders”.
*Press and hold Volume + and Multifunction Button for 2
seconds after you hear” Play Current Folder”. You will then
hear, “Next folder”.
Volume - Volume+
Multifunction/Power Button
15

Care and
Maintenance
16

Charging Tips
The headphones will automatically
shut down when charging
CHARGING TIPS
1. Attach OpenSwim to the USB Charging Cradle. Make sure that
Pogo Pins and Terminals are in contact.
2. Connect the cradle to a computer or an adapter.
The LED indicator will turn blue when charging is complete.
Pogo Pins
Terminals
17

Storage and Maintenance
STORAGE AND MAINTENANCE
Preventing Hearing Loss
Listening to music with this headset at high volume for a long period of time
may affect your hearing, and may also lead to sound distortion.
Storage and Maintenance
· The headset should be kept in a cool, dry place at a temperature of 0~45 °C.
Using the headset under extremely cold, hot or humid conditions or at
extremely low pressure may shorten the battery life.
· Do not expose the headset to heat sources, sunlight, or combustible gas.
· Do not expose the headset to any liquids other than fresh water, sweat and
pool water.
· Placing the headset in sea water or saline water will likely lead to charging
contact corrosion.
· The headset’s liquid and dust resistance level is IP68. Do not use it when
diving deeper than 2 m.
· It is recommended to periodically remove any residue that may be accumu-
lated on the headset.
· If the charging contact becomes wet, dry it with a dry, soft towel and let the
headset dry at room temperature until no moisture remains on it before
charging.
· The USB charging cradle included with the headset is not waterproof. Do
not use the USB charging cradle when your hands or the headset is wet.
· After long-term storage, charge the headset again before use.
Note
The design and specifications are subject to change without prior notice. For
the latest company and product information, please visit www.shokz.com.
Notes on Use
· The headset will automatically shut off after one hour of idleness.
· OpenSwim supports MP3, WMA, FLAC, WAV and AAC formats. Among these,
OpenSwim only supports WAV files in Linear PCM format.
· The nominal capacity is the product specification. Due to the differences in
computing methods and built-in functions, the actual available space is less
than the nominal value. In this case, the actual storage space shall prevail.
· Before swimming with the headset on, please ensure that it is worn proper-
ly and securely, otherwise the headset may fall into the water due to strenu-
ous movement.
· The headset includes professional silicone swimming earplugs. If the area in
contact with the ear becomes inflamed or irritated during use, immediately
18

STORAGE AND MAINTENANCE
remove it and seek medical advice.
Warranty
· To avoid the danger of explosion, fire or toxic chemical spills, do not disas-
semble, replace, deform or destroy the battery by yourself.
· If the battery is improperly replaced, the headset may explode. It shall only
be replaced with a battery of the same type or one of equivalent perfor-
mance.
· Do not expose the battery to sunlight, fire or other intense heat.
· Do not subject the battery to disassembly, shock, excessive pressure or fire.
In case of serious swelling, stop using it immediately. Do not expose it to high
temperature.
· Please note that in some countries and regions, using this product while
driving or cycling may violate regulations. Please check and comply with the
traffic regulations and relevant laws and regulations in your area, or consult
the local regulatory authorities.
· Some people may experience certain reactions to specific materials. Being
exposed to a specific environment, or coming in long-term contact with
potentially irritating substances and other substances such as soap, sweat,
UV protection products or body lotion, may lead to skin allergic reactions.
· To reduce the risk of skin irritation, do not wear the product on body parts
with skin injuries.
· If your skin becomes red, swollen, itchy or exhibits any other irritating reac-
tion, remove the headset immediately and consult a doctor.
· Use only the dedicated USB charging cradle approved by the manufacturer.
Unauthorized charging cradles do not meet applicable safety standards, and
may result in user injury or device damage.
· Only power supplies that have been approved by relevant departments and
meet local regulatory requirements (such as UL, CSA, VDE and CCC) shall be
used.
19