Razer RZ04-0267 User manual

Date: 14 September
2018
User Manual For Gaming Headset
System model number RZ04-0267
consist of Gaming Headset Model
RC30-026701 and Wireless USB
Transceiver RC30-0267

FOR GAMERS. BY GAMERS.™ 1
PACKAGE CONTENTS / SYSTEM REQUIREMENTS
PACKAGE CONTENTS
 Gaming Headset (System model number RZ04-0267 consist of Gaming Headset Model
RC30-026701 and Wireless USB Transceiver RC30-0267)
 USB wireless transceiver
 Charging cable
 3.5mm combo cable
 Important Product Information Guide
SYSTEM REQUIREMENTS
HARDWARE REQUIREMENTS
 Devices with a USB port
 Mobile devices with a 3.5mm combo port
RAZER SYNAPSE 3 REQUIREMENTS
 Windows® 7 64-bit (or higher)
 Internet connection
 500 MB of free hard disk space

FOR GAMERS. BY GAMERS.™ 2
2. REGISTRATION / TECHNICAL SUPPORT
REGISTRATION
Register your product online at razerid.razer.com/warranty to get real-time information on your
product’s warranty status.
If you haven’t registered for a Razer ID yet, register now at razerid.razer.com to get a wide range of
Razer benefits.
TECHNICAL SUPPORT
 1 year limited manufacturer’s warranty
 Free online technical support at support.razer.com
Your product’s serial number can be found
underneath the ear cushion, as shown here.

FOR GAMERS. BY GAMERS.™ 3
DEVICE LAYOUT
A. Auto-adjusting headband
B. Cooling gel-infused ear cushions
C. 50mm drivers with HyperSense
Technology
D. Razer Chroma backlighting
E. Mic mute indicator
F. Retractable mic
G. Mic mute button
H. Game/Chat balance
I. Status indicator
J. Power button
K. Charging port
L. 3.5mm combo port
M. Volume control
N. Transceiver storage
O. USB wireless transceiver
P. Charging cable
Q. 3.5mm combo cable

FOR GAMERS. BY GAMERS.™ 4
SETTING UP YOUR RAZER NARI ULTIMATE
CHARGING YOUR HEADSET
Connect your Razer Nari Ultimate to a powered USB port using the charging cable.
For best results, please fully charge your headset before using it for the first time. A depleted unit
will fully charge in about 4 hours.
UNDERSTANDING THE CHARGING NOTIFICATIONS
Your Razer Nari Ultimate will send out notifications depending on its current charging status, as
shown here:
STATUS INDICATOR
SOUND INDICATOR
DESCRIPTION
Static red None Charging/low
battery
Static green None Fully charged/full
battery
Blinking red Warning tone Battery is critically
low

FOR GAMERS. BY GAMERS.™ 5
CONNECTING TO YOUR PC VIA USB PORT
1. Plug the USB wireless transceiver to your PC.
2. Right-click on the sound icon on the system tray, and then select Sounds.
3. On the Playback tab, select Razer Nari Ultimate - Chat from the list, and then set it as the
Default Communication Device.

FOR GAMERS. BY GAMERS.™ 6
4. On the Playback tab, select Razer Nari Ultimate - Game from the list, and then set it as the
Default Device.
5. In the Recording tab, select Razer Nari Ultimate - Chat from the list and click the ‘Set
Default’ button.

FOR GAMERS. BY GAMERS.™ 7
CONNECTING TO OTHER DEVICES VIA USB PORT
1. Push in the USB wireless transceiver until you hear a click then release your finger so that it
ejects from your headset.
Note: To return the USB wireless transceiver, push it into the compartment until you hear a click.
2. Plug the USB wireless transceiver to your device and make sure your Razer Nari Ultimate is
the default input and output audio device.
CONNECTING YOUR HEADSET
1. Power on your headset by holding the power button for at least 3 seconds or until you hear
2 short beeps.

FOR GAMERS. BY GAMERS.™ 8
2. Wait until the status indicator is static blue.
CONNECTING TO DEVICES VIA 3.5MM COMBO PORT
If your device has a 3.5mm audio + mic combined jack, simply plug the 3.5mm audio cable from
your headset to your device’s audio jack.
NOTIFICATION STATUS
Blinking
Pairing
Rapid blinking
Connecting
Static
Connected
Note: Keep your headset within close
proximity of the USB wireless
transceiver for a faster and more
stable connection. If your headset fails
to connect, it will automatically power
off after a few minutes.

FOR GAMERS. BY GAMERS.™ 9
USING YOUR RAZER NARI ULTIMATE
USING THE VOLUME CONTROL
Rotate the volume control to increase or decrease the volume.
USING THE GAME/CHAT BALANCE
Rotate the game/chat balance to increase the in-game volume and decrease the voice chat volume
or vice versa. By default, the notch on the wheel is set to the middle to indicate 50% chat and 50%
game volume.