SHORE TEL BB424 User manual

3
2
In 1
Adjusng the Viewing Angle of the BB424
(Oponal)
The stand on the BB424 supports two lt angles so that you can adjust how the buon box sits
on a desk. The stand is shipped in the low posion, which is the recommended posion. If you
prefer the stand to be in the high posion, use these instrucons to change the lt angle.
Remove the Stand:
① Disconnect any cables from the back of the BB424.
② Grasp the BB424 base in one hand and the stand in the other.
③ Pull the stand o the base unl it unsnaps.
Connecng a Single BB424 to a Phone
Required Items:
l 500 mm micro USB cable (included). If you want to posion the BB424 farther from the phone, use
a standard USB cable.
l ShoreTel IP485g phone
Connect the BB424 to the Phone:
① Ensure that the host ShoreTel IP485g phone is powered on and running.
② The BB424 is shipped with the micro USB cable already plugged into the back of it. Ensure that it
is plugged in rmly.
③ Thread the free end of the micro USB cable from the side of the BB424 stand through the side of
the ShoreTel IP485g phone stand. Plug the USB jack into the USB port on the rear of the ShoreTel
IP485g phone.
Aer a few seconds, the BB424 powers on and runs through a series of system tests. The BB424 auto-
macally updates to the rmware version of the host phone.
ShoreTel BB424
Quick Install Guide
ShoreTel, Inc. lwww.shoretel.com
Refer to http://www.shoretel.com/products/ip_phones for more information.
Part Number: 800-1891-01
41
1
2
2
3
Low angle
High angle
Replace the Stand:
① Rotate the stand 180 degrees. Seat the stand rmly in the hooks.
② Push the stand into the base unl it snaps into place.
③ Reaach cables.

4
DC12V
3
Out 2
2
In 1
3
Out 3
2
In 1
Connecng a Second BB424 (Oponal)
Requires External Power Supply
Required Items:
l AC Adapter (not included)
l 500 mm micro USB cable (included) for connecng the second BB424 to the rst BB424
Connect a Second BB424 to the First BB424:
This procedure assumes that you have already connected one BB424 to a phone, as described in
“Connecng a Single BB424 to a Phone” on pg. 1.
① Ensure that the host ShoreTel IP485g phone and the rst BB424 are powered on and running.
② The BB424 is shipped with the micro USB cable already plugged into the back of it. Ensure
that this cable is plugged in rmly.
③ Thread the free end of the USB cable from the side of the second BB424’s stand through the
side of the rst BB424’s stand. Plug the USB jack into the Out 2 USB port on the rst BB424.
④ On the rear of the rst BB424, connect the AC adapter. Then connect the power source to
your wall outlet.
Aer a few seconds, the second BB424 powers on and runs through a series of system tests. The
BB424 automacally updates to the rmware version of the host phone. The rst BB424 discon-
nects and reconnects, and the pages on each BB424 are resequenced to reect the number of
BB424 devices.
Connecng a Third or Fourth BB424 (Oponal)
(No Addional External Power Source Required)
Required Items:
l 500 mm micro USB cable (included) for connecng each addional BB424 to the rst BB424
Connect a Third or Fourth BB424 to the First BB424:
This procedure assumes that you have already connected two BB424s to a phone, as described in
“Connecng a Second BB424” on pg. 2.
① Ensure that the host ShoreTel IP485g phone and the rst and second BB424s are powered on and
running.
② Each BB424 is shipped with the micro USB cable already plugged into the back of it. Ensure that
this cable is plugged in rmly.
③ Thread the free end of the micro USB cable from the side of the third or fourth BB424’s stand
through the other BB424 stands and then through the side of the rst BB424’s stand.
• For the third BB424, plug the USB jack into the Out 3 USB port on the rst BB424.
• For the fourth BB424, plug the USB jack into the Out 4 USB port on the rst BB424.
Aer a few seconds, the addional BB424s power on and run through a series of system tests. They
automacally update to the rmware version of the host phone. Any previously connected BB424s
disconnect and reconnect, and the pages on each BB424 are resequenced to reect the number of
BB424 devices.
3
2
3
Out 4
2
In 1