Show Tec EVENTLITE 6/3 User manual

EventLITE 6/3 WDMX V2
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 44000
MANUAL
ENGLISH

1
Ordercode: 44000
EventLITE 6/3 WDMX
Table of contents
Warning ...............................................................................................................................................................................2
Safety Instructions .........................................................................................................................................................2
Operating Determinations ..........................................................................................................................................4
Rigging ............................................................................................................................................................................4
Connection with the mains.........................................................................................................................................5
Return Procedure..........................................................................................................................................................5
Claims..............................................................................................................................................................................5
Description of the device.................................................................................................................................................6
Overview ........................................................................................................................................................................7
Installation...........................................................................................................................................................................8
Set Up and Operation .......................................................................................................................................................8
Important........................................................................................................................................................................8
Sweden 2.4GHz Wireless communication module ................................................................................................8
Wireless DMX connection............................................................................................................................................8
Connect the EventLITE 6/3 WDMX to the Wireless DMX signal transmitter ...................................................11
Disconnect from the Wireless DMX signal transmitter.......................................................................................11
Charging the built-in battery .................................................................................................................................11
Fixture Linking ...............................................................................................................................................................12
Data Cabling...............................................................................................................................................................12
Control Modes.............................................................................................................................................................13
Multiple EventLITE 6/3 WDMX (DMX512 Mode) ..................................................................................................13
Multiple EventLITE 6/3 WDMX (Slave Mode) .......................................................................................................14
One EventLITE 6/3 WDMX (Color Mode + Program Mode + AutoRun Mode) .............................................15
One EventLITE 6/3 WDMX (Sound Mode)............................................................................................................15
Control Panel ...............................................................................................................................................................16
DMX Control Mode.....................................................................................................................................................16
DMX Addressing ..........................................................................................................................................................16
Menu overview ................................................................................................................................................................17
Main Menu Options....................................................................................................................................................18
DMX512 Mode.............................................................................................................................................................18
Slave Mode ..................................................................................................................................................................19
Color Mode..................................................................................................................................................................19
Wireless Setup ..............................................................................................................................................................19
ECO Setup ....................................................................................................................................................................19
Program Mode ............................................................................................................................................................20
AutoRun Mode ............................................................................................................................................................20
Sound control Mode ..................................................................................................................................................20
DMX Channels.............................................................................................................................................................21
Maintenance....................................................................................................................................................................23
Troubleshooting ...............................................................................................................................................................23
No Light.........................................................................................................................................................................23
Temperature Control Protection..............................................................................................................................23
No Response to DMX..................................................................................................................................................23
Product Specifications....................................................................................................................................................25
Notes ..................................................................................................................................................................................26

2
Ordercode: 44000
EventLITE 6/3 WDMX
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear to be damaged from shipping or the carton
itself shows signs of mishandling. Save the carton and all packing materials. In the event that the fixture
must be returned to the factory, it is important that the fixture be returned in the original factory box and
packing.
Your shipment includes:
●Showtec EventLITE 6/3 WDMX
●Schuko to IEC power cable 1,5m
●User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. It is estimated that a viable lifespan of 40,000 to 50,000 hours will be achieved
under normal operational conditions. If extending the device’s life expectancy is of higher priority, place
care in providing for lower operational temperatures. This may include climatic-environmental and the
reduction of overall projection intensity
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
●be qualified
●follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

3
Ordercode: 44000
EventLITE 6/3 WDMX
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never place any material over the lens.
Never look directly into the light source.
Never leave any cables lying around.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this would reduce the device’s lifespan.
Do not touch the device’s housing bare-handed during its operation. Allow the fixture to cool for at
least 5 minutes before handling.
Do not shake the device. Avoid brute force when installing or operating the device.
Only use device indoor, avoid contact with water or other liquids.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord by the plug. Never pull out the plug by tugging the power cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
If the lens is obviously damaged, it has to be replaced to prevent its functions from being impaired,
due to cracks or deep scratches.
If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Device must be installed out of reach of children. Never leave the unit running
unattended.
Never attempt to bypass the thermostatic switch or fuses.
For replacement, use fuses of same type and rating only.
The user is responsible for correct positioning and operating of the Showtec EventLITE 6/3 WDMX.
The manufacturer will not accept liability for damages caused by the misuse or incorrect installation
of this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
During the initial start-up, some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
Repairs, servicing and electrical connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.

4
Ordercode: 44000
EventLITE 6/3 WDMX
Operating Determinations
●This device is not designed for permanent operation. Regular operation breaks will ensure that the
device will serve you for a long time without defects.
●The minimum distance between light-output and the illuminated surface must be bigger than 1
meter.
●The maximum ambient temperature ta = 45°C must never be exceeded.
●The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
●If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other safety
issues.
Do not attempt the installation yourself!
Always let the installation be carried out by an authorized dealer!
Procedure:
●If the projector is lowered from the ceiling or high joists, professional trussing systems have to be used.
●Use a clamp to mount the projector, with the mounting bracket, to the trussing system.
●The projector must never be fixed swinging freely in the room.
●The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
●When rigging, derigging or servicing the projector, always make sure, that the area below the
installation place is separated and that there are no unauthorized persons in the area.
The Showtec EventLITE 6/3 WDMX can be placed to any kind of truss by a clamp.
Improper installation can cause serious injuries and/or damage of property!

5
Ordercode: 44000
EventLITE 6/3 WDMX
Connection with the mains
Connect the device to the mains with the power plug.
Always check if the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Make sure that the device is always connected properly to the earth!
Improper installation can cause serious damage to people and property!
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause of the
return. Be sure to properly pack fixture as any shipping damage resulting from inadequate packaging is
the customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name.
02) Your address.
03) Your phone number.
04) A brief description of the symptoms.
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that the fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
agreed otherwise in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period, complaints will not be handled anymore.
Complaints will only be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

6
Ordercode: 44000
EventLITE 6/3 WDMX
Description of the device
Features
The EventLITE 6/3 WDMX is a compact and lightweight LED effect from Showtec
Input Voltage (battery charger):
AC 100V-240V, 60Hz/50Hz (only power in, no power out)
Battery:
11.1V, 12AH
Power consumption at full output:
30W
LED:
3 in 1 RGB LED’s (6*Tri-3W) combined with dedicated high class
optics ensuring a bright and well defined beam
Operating time at Full On:
7 hours (RGB)
9 hours (RGB) in ECO mode
Charging time:
8 hours (LED blackout when the device is charging)
Operation mode:
LCD display
Control feature:
Built-in programs, auto-run mode, DMX mode, master/slave mode,
sound-active mode, and static color
DMX channels:
2, 3, 5 Channels
DMX communication mode:
2.4GHz wireless communication (received), XLR3 wired connection
Wireless module: Sweden W-DMX TRx 2.4G WIFI, 2dBi Antenna
DMX linking:
30pcs
Color mixing:
RGB
Projection Angle:
Adjustable
Dimmer:
0-100%
Fuse:
F1A/250V
Housing:
Stainless steel
IP rating:
IP44
Rain cover (44001) is separately available
Fixture Connection:
3-pin XLR In and Out, IEC Power in
Cooling:
Convection
Dimensions:
162 x 178 x 289 mm (LxWxH)
Weight:
3,5 Kg
Note: Knowledge of DMX is required to fully utilize this unit.

7
Ordercode: 44000
EventLITE 6/3 WDMX
Overview
Fig. 01
01) IEC Power Connector + Fuse F1A / 250V
02) 6x 3-in-1 RGB LEDs 3W
03) Wireless DMX Antenna
04) DMX signal connector (IN) 3-pin
05) DMX signal connector (OUT) 3-pin
Fig. 02
06) Battery Level LEDs
07) LCD Display with menu buttons
08) Wireless DMX LED
09) Wireless DMX Unlink button
10) On/Off switch

8
Ordercode: 44000
EventLITE 6/3 WDMX
Installation
Remove all packing materials from the EventLITE 6/3 WDMX. Check that all foam and plastic padding is
removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Important
From software version V3.0 and newer, ”Lock” will appear on the display when the EventLITE 6/3 WDMX is
switched on.
The EventLITE 6/3 WDMX can be unlocked by pressing and holding the MODE and DOWN button
simultaneously for 3 seconds.
Note: This function cannot be switched off
Sweden 2.4GHz Wireless communication module
Communication distance:
depending on the transmitting power or transmitter module
Test conditions:
W-DMX TRx Transmitter module, 2dBi Antenna, transmitting power
20dBm (100mW)
Range indoor:
60m (approx. through three concrete walls)
Range outdoor:
250m
Wireless DMX connection
The wireless receiving module “Pico G4 Receiver, 2.4GHz”, provided by Swedish WIRELESS SOLUTION, only
has a 2.4 GHz wireless signal receiving function. In order to match the wireless signal, please use the
Wireless DMX Micro Transmitter/ Black Box F-1 G4 MK2 by WIRELESS SOLUTION (50231).
To control the status of the wireless communication, please look at the big green LED indicator light on
the right side of the display.
Wi-fi Problems:
01) No emitter/sender matching.
The LED Indicator dims for a long period of time.
02) Matching signal with one emitter, but loss of signal communication.
The LED Indicator light will light up for 100ms and then dim for 100ms; The LED will flicker quickly.
03) Communication with an emitter, but no DMX data.
The LED Indicator will light up for 900ms and then dim for 100ms; The LED will flicker slowly.
When the wireless DMX communication is normal, the LED indicator will always be on.
The EventLITE 6/3 WDMX cannot receive a wireless DMX signal and a DMX
cable signal at the same time
When the device is in static color mode, built-in program mode, auto-run mode or sound-active mode,
please ensure that the matching 2.4GHz wireless signal transmitter is OFF.

9
Ordercode: 44000
EventLITE 6/3 WDMX
The EventLITE 6/3 WDMX is only a WDMX receiver and never a WDMX sender
Fig. 03
Example (Fig. 03):
In Program Mode, AutoRun Mode, Color Mode and Sound Mode, the EventLITE 6/3 WDMX cannot send a
signal to another EventLITE 6/3 WDMX wirelessly !!
In one of these modes, the slave The EventLITE 6/3 WDMX fixtures must always be connected via a DMX
signal cable.
When the EventLITE 6/3 WDMX operates in DMX or SLAVE mode, the EventLITE 6/3 WDMX can receive a
Wireless DMX signal (CH1-512) and at the same time it can also sent out a DMX signal through a DMX
cable.

10
Ordercode: 44000
EventLITE 6/3 WDMX
The EventLITE 6/3 WDMX is only a WDMX receiver and never a WDMX sender
Fig. 04
Example (Fig. 04):
The Showtec Operator Air (50726) sends out a wireless signal with 512 channels and the EventLITE 6/3
WDMX picks up this signal. It uses the first 5 channels for its own setup and sends the rest of the channels
through a DMX cable to the other Compact Pars 7 (42580).

11
Ordercode: 44000
EventLITE 6/3 WDMX
Connect the EventLITE 6/3 WDMX to the Wireless DMX signal transmitter
The EventLITE 6/3 WDMX cannot actively match a random wireless signal transmitter.
In order to create a Wireless match, please check the manual of your wireless signal transmitter.
We advise you to use the Wireless DMX Micro Transmitter/ Black Box F-1 G4 MK2 by WIRELESS SOLUTION
(Fig. 05).
Fig. 05 50231
Disconnect from the Wireless DMX signal transmitter
The EventLITE 6/3 WDMX can be temporarily disconnected from the wireless DMX signal transmitters.
Press and hold the Unlink-button for more than 3 seconds. The display will show the amount of time for
which you are keeping the button pressed (Fig. 06).
When you release this button, the device will be temporarily disconnected from the wireless DMX signal
transmitter, the indicator light will turn off.
The EventLITE 6/3 WDMX can only rebuild its wireless communication by first disconnecting and then trying
to match the active signal condition.
Fig. 06 Wireless DMX Unlink button
Charging the built-in battery
The device is equipped with a 11.1V/12AH lithium battery.
Turn off the power switch.
In order to charge the battery, you need to plug in the IEC power cable.
While the battery is charging, the green LEDs on the left side will light up, just like an equalizer.
When the battery is fully charged, the green LEDs will light up permanently.
You cannot take out the lithium battery and charge it separately.
The battery can only be charged when it is inside of the device
Important!
Do not charge the lithium battery for more than 24 hours.
Please recharge the battery in time. Example: When the battery is low on power or out of power. If you
do not use the EventLITE 6/3 WDMX for a long time, please recharge the battery at least once a month, in
order to prevent the lithium battery from damaging.
After a cycle use of 300 times, the battery capacity will be reduced to about 8AH (70% of the total
capacity). Please reduce the charge and discharge times, to extend the battery lifetime. After 300 times
of charging and discharging, you need to replace the battery.
Store in the upright position.

12
Ordercode: 44000
EventLITE 6/3 WDMX
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
The EventLITE 6/3 WDMX uses up to 5 channels.
Important:
Fixtures on a serial data link must be daisy chained in one single line. To comply with the
EIA-485 standard no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of EventLITE 6/3 WDMX on a DMX data link: 30 fixtures
Data Cabling
To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio Certified DMX Data Cables
●DAP Audio cable for allround use. bal. XLR/M 3 p. > XLR/F 3 p.
Ordercode FL01150 (1,5m.), FL013 (3m.), FL016 (6m.), FL0110 (10m.), FL0115 (15m.), FL0120 (20m.).
●DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5m.), FL713 (3m.), FL716 (6m.), FL7110 (10m).

13
Ordercode: 44000
EventLITE 6/3 WDMX
Control Modes
There are 6 modes:
DMX512 Mode
Slave Mode
Color Mode
Program Mode
AutoRun Mode
Sound Mode
Multiple EventLITE 6/3 WDMX (DMX512 Mode)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-p XLR cable to connect the EventLITE 6/3 WDMX and other devices.
05) Link the units as shown in (Fig. 07), Connect a DMX signal cable from the first unit's DMX "out" socket
to the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
06) Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the
other end of the mains power cord into proper electric power supply sockets, starting with the first
unit. Do not supply power before the whole system is set up and connected properly.

14
Ordercode: 44000
EventLITE 6/3 WDMX
Multiple EventLITE 6/3 WDMX DMX Set Up
Fig. 07
Note: Link all cables before connecting electric power!
Multiple EventLITE 6/3 WDMX (Slave Mode)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-p XLR cable to connect the EventLITE 6/3 WDMX.
The pins:
1. Earth
2. Signal (-)
3. Signal (+)
05) Link the units as shown (Fig. 08)to the second unit's "in" socket. Repeat this process to link the second,
third, and fourth units. You can use the same functions on the master device as described on page
19 (Manual Control or Music control). This means that all slave devices will react the same as the
master device.

15
Ordercode: 44000
EventLITE 6/3 WDMX
Multiple EventLITE 6/3 WDMX (Master/Slave control)
Fig. 08
One EventLITE 6/3 WDMX (Color Mode + Program Mode + AutoRun Mode)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) When the EventLITE 6/3 WDMX is not connected with a DMX-cable and Wireless DMX is switched off,
it functions as a stand-alone device.
04) See page 19-20 for more information about the Built-in Programs + Auto Run + Static colors.
One EventLITE 6/3 WDMX (Sound Mode)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Turn on the music. If the device is set to (Audio) and you have pressed Setup, then the
fixture will react to the music beats.
04) Please see page 20 for more information about the sound-control options.

16
Ordercode: 44000
EventLITE 6/3 WDMX
Control Panel
Fig. 09
A) Battery indicator LEDs
B) LCD Display
C) WDMX indicator LED
D) MODE button
E) SETUP Button
F) Up Button
G) Down Button
H) Wireless DMX Unlink button
I) ON/OFF switch
DMX Control Mode
The fixtures are individually addressed on a data-link and connected to the controller. When a DMX
signal is present, the green LED (C) will blink. The fixtures respond to the DMX signal from the controller.
DMX Addressing
The control panel on the front side of the base allows you to assign the DMX fixture address, which is the
first channel from which the EventLITE 6/3 WDMX will respond to the controller. Please note when you use
the controller, the unit has up to 5 channels. When using multiple EventLITE 6/3 WDMX, make sure you set
the DMX addresses right. Therefore, the DMX address of the first EventLITE 6/3 WDMX should be 1(001); the
DMX address of the second EventLITE 6/3 WDMX should be 1+5=6(006); the DMX address of the third
EventLITE 6/3 WDMX should be 6+5=11(011), etc. Please, be sure that you do not have any overlapping
channels in order to control each EventLITE 6/3 WDMX correctly. If two or more EventLITE 6/3 WDMX are
addressed similarly, they will work similarly.
Controlling:
After having addressed all EventLITE 6/3 WDMX, you may now start operating these via your lighting
controller.
Note: After switching on, the EventLITE 6/3 WDMX will automatically detect whether DMX 512 data is
received or not. The problem may be:
•The XLR cable from the controller is not connected with the input of the EventLITE 6/3 WDMX.
•The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It is necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
The EventLITE 6/3 WDMX will only show its version number at start-up!

17
Ordercode: 44000
EventLITE 6/3 WDMX
Menu overview

18
Ordercode: 44000
EventLITE 6/3 WDMX
Main Menu Options
Press the MODE button to scroll through 8 options of the menu:
01) DMX512 Mode
02) Slave Mode
03) Color Mode
04) Wireless Setup
05) ECO Setup
06) Program Mode
07) AutoRun Mode
08) Sound Mode
DMX512 Mode
When a DMX signal is present, the DMX LED will light up.
With this menu you can set the DMX address and the personality of the EventLITE 6/3 WDMX
01) Press the MODE button, until the display shows:
02) You can choose 512 different DMX addresses.
Use the Up/Down buttons to select the required address from:
03) When you press the SETUP button twice, the display shows:
04) You can set 3 DMX Modes:
2 Channels
3 Channels
5 Channels

19
Ordercode: 44000
EventLITE 6/3 WDMX
Slave Mode
When the display shows: the device becomes a slave device. It will now react the same as
its master.
Color Mode
With this menu you can set the Static Colors (R,G,B) of the EventLITE 6/3 WDMX.
01) Press the MODE button on the EventLITE 6/3 WDMX, until the display shows:
02) Use SETUP to change the static colors (Red, Green, Blue).
03) Use the UP/DOWN buttons to change the value from 0-255.
04) You can combine RED, GREEN and BLUE to create an infinite range of colors (0-255).
Red
Set the value of the red LEDs (0-255).
Green
Set the value of the green LEDs (0-255)
Blue
Set the value of the blue LEDs (0-255).
Wireless Setup
01) Press the MODE button to enter the wireless DMX function setting mode
02) Press SETUP to enter into wireless DMX function ON-OFF setting menu.
03) Use the UP/DOWN buttons to choose ON-OFF.
ECO Setup
01) Press MODE button enter to the ECO mode
02) Press SETUP button to enter the settings menu.
03) Use the UP/DOWN buttons to choose ON-OFF.
ECO OFF: The fixture brightness will reach its brightest, full-on working time is 7 hours.
ECO ON: The fixture brightness will be 70% of the maximum brightness, full on working time is 9 hours.