Show Tec QUATRO 50462 User manual

Quatro
ORDERCODE 50462

Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec Quatro brings excitement to any venue. Whether you want simple plug-&-play action or a
sophisticated DMX show, this product provides the effect you need.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: [e-mail]
You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!

1
2
2
3
4
5
5
6
7
7
7
8
8
9
10
11
12
13
13
13
13
14
15
Showtec
Showtec Quatro™Product Guide
Warning..…...................................................................................……………………………………….…
Safety-instructions…………………………………………………………………………………………...
Operating Determinations……………………………………………………………………………......
Rigging……………………………………………………………………………………………………......
Description..…..............................................................................……….………………………………...
Features and Overview ………………………………...….……………….………….………………....
Backside…………………………………………………...…...….……………….…………………...…....
Installation...............................................................................…...…………………………………….…..
Installing the Lamp ........................................................………………………………………..………
Set Up and Operation.....................................................................……..………………………………..
Quick Reference Table................................................................…....………………………………..
Multiple Quatro’s.......................................................…....……………………………………………...
Chase Mode................................................................…....…………………………………………....
Receive Mode................................................................…....………………………………………….
Separate and Parallel…..............................................................…....………………………………..
Link-Up...............................................................…....…………………………………………………….
Maintenance...................................................................................………..………….…….…………….
Changing the Lamp........................................................................…………………….……………..
Troubleshooting............................................................................………………….………………….…..
No Response to DMX ....................................................................………………….…………………
Product Specifications.................................................................……………….…….…………………..
Appendix: MIDI Implementation Chart...............................................................................................

2
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this device has to:
-be qualified
-follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-
observance of this manual or any unauthorized modification to the device.
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never run the device without lamp!
Never ignite the lamp if the housing-cover is open, as discharge lamps may expose and emit a
high ultraviolet radiation, which may cause burns.
Never look directly into the light source.
Never leave any cables lying around.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this would reduce the lamp’s life.
Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Do not shake the device. Avoid brute force when installing or operating the device.
Only use device indoor, avoid contact with water or other liquids.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always replace the lamp, when it is damaged or deformed due to the heat.
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!

3
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used, before cleaning or when
replacing lamp! Only handle the power-cord by the plug. Never pull out the plug by tugging the
power-cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the power-
cord from time to time.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do
not switch it on immediately. The arising condensation water might damage your device. Leave
the device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. The device must be installed out of the reach of children. Never leave the unit
running unattended.
For replacement use lamps of same type and rating only.
Allow time to cool down, before replacing lamp.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
OPERATING DETERMINATIONS
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
The minimum distance between light-output and the illuminated surface must be more than 1.3 meter.
The maximum ambient temperature tamust never be exceeded.
If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash
etc.
You endanger your own safety and the safety of others!
CAUTION ! EYEDAMAGES !.
Avoid looking directly into the light source.
(meant especially for epileptics) !

4
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other
safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the Quatro is lowered from the ceiling or high joists, professional trussing systems have to be
used.
Use a clamp to mount the Quatro, with the mounting-bracket, to the trussing system.
The Quatro must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net
or safety-cable.
When rigging, derigging or servicing the Quatro, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
Improper installation can cause serious damage to people and property !
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
FASE
N
BLUE
BLACK
SILVER
NUL
YELLOW/GREEN
GREEN
GREEN
EARTH
Make sure that the device is always connected properly to the earth!

5
Description of the device
Features
The Showtec Quatro is a light effect with high output and great effects.
• 4x 500W Colourmixing
• 4 channel chaser with 16 built-in programs
• 4 channel DMX dimmer pack with 4 individual DMX addresses
• MIDI and DMX input are selectable
• Serves as one channel or four channel dimmer pack
• Red, Green, Yellow and Blue for a huge variety of colors; each color can be dimmed separately
• DMX-control via standard DMX-controller
• 4 DMX-control channels required
• Lamp 4x R7-S 500W (ordercode 82282)
• Power Failure Memory
Overview
Fig. 1
1) Mounting bracket
2) 4 x 500W R7-S Lamp (Yellow, Blue, Green, Red)
Quatro completely closed
Fig. 2

6
Backside
Fig. 3
1) Midi In
This connector accepts MIDI Note Number
2) Midi Thru
This connector sends MIDI Note Number through to the next MIDI device.
3) Monitor LEDS
Indicate the activities of corresponding channels.
4) LCD Display
Reads current function state or activity.
5) Menu Buttons (Mode, Menu, Up, Down)
MODE: Selects operating mode from Receive/ Chase modes.
MENU: Press to select desired menu setup. Each pressing changes the menu setup once.
Up / Down: Increase / Decrease the display value.
6) Link In
This connector accepts the information from another unit.
7) Link Out
This connector sends the information to next unit.
8) DMX signal connector (IN)
This connector accepts DMX input signal.
9) DMX signal connector (OUT)
This connector sends DMX input signal through to the next DMX device
10) Automatic Fuse 16A

7
Installation
Installing the Lamp
The Showtec Quatro uses 4x R7-S (ordercode 82282) bulb as manufactured by all popular manufacturers.
Use only the appropriate lamp for your unit.
Note that, product versions that use other lamps may be offered in the future. Check your product
specification label for information.
Always disconnect from electric mains power supply before changing lamps.
The lamp has to be replaced when it is damaged or deformed due to the heat.
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the
device was not designed for.
Damages caused by non-observance are not subject to warranty.
Procedure :
1. Loosen the 6 screws (Fig. 4.1) of the housing. Gently remove the metal housing.
1. Loosen the 2 screws (Fig. 4.2) of the glass lamp cover. Gently remove the cover.
3. Read lamp instructions. Do not touch the lamp bulb glass.
Oil on hands shortens the lamp life. (If you touch the bulb glass, wipe off the glass with a clean, lint-free
towel and rubbing alcohol.).
4. Insert the lamp in the lamp socket. First insert the left side (Fig. 4.3) and then the right side (Fig. 4.4).
5. Put the lamp cover back and fasten the screws snugly. Then put the metal housing back and fasten
The screws snugly.
1 2 3 4
Fig. 4
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

8
Quick Reference Table
Multiple Quatro’s
1. Fasten the effect light onto firm trussing (Use a 30-kg rated or stronger C-clamp fastened onto the
Quatro ). Leave at least 1 meter on all sides for air circulation.
2. Use a 3-p XLR cable to connect the Quatro’s and other devices.
The pins:
1. Earth
2. Signal -
3. Signal +
3. Link the units as shown, Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
4. Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the other
end of the mains power cord into proper electric power supply sockets, starting with the first unit. Do
not supply power before the whole system is set up and connected properly.
Multiple Quatro’s Set Up
DMX-Set up
Master/Slave Set up
Fig. 4
Note : Link all cables before connecting electric power

9
Chase Mode
Press Mode button to select Chase Mode.
Tap ▲or ▼button to your wanted chase from 16 different built-in
chases.
Press Menu Button to adjust the chase speed. Use ▼or ▲button to
get your desired speed value.
Press Menu Button to adjust light intensity of all four channels.
Use ▲or ▼button to get your desired dimmer value.

10
Receive Mode
Press Mode Button to select Receive Mode.
Use ▼or ▲button to set MIDI in channels
Press Menu Button to select DMX addressing, the Segment Display
shows "A" followed by three numbers.
Use ▲or ▼button to adjust the value from 001-512.
Press Menu Button until "Nor" appears, which indicates MIDI Mode is
normal. Press ▲button and Display Segment will read F: 36 which
indicates MIDI Mode is shifted to F: 36 State.

11
Press Menu Button to select Master dimmer setting.
Use ▲or ▼button to adjust the light intensity of all four channels.
Separate and Parallel
In Receive Mode, press Mode button first, then press Menu button,
signal input method will switch between Separate and Parallel.
In Separate state, continuous 4 channel DMX signal and 21 Note Numbers can be received.
4 channels DMX signal and Note Numbers 0-3 control the intensities of 4 channels.
Note Numbers 4-19 turn ON or OFF preset Programs 1-16, and the Velocity controls the intensity of the
program.
Note Number 20 controls the chasing speed.
In Parallel State, Note Number 0 and DMX channel 1 controls the intensity of 4 channels.
Note Numbers 4-19 turn ON or OFF preset 16 program, and the Velocity controls the intensity of the
program.
Note Number 20 controls the chasing speed.

12
Link-Up
This product can work with more than one unit through link-up easily and conveniently. All other link-up
units are controlled by the first one and change of work state set will change all.
There is time-delay with the max. 0.4 sec. change when the function set change is transmitted to the next
unit. All the link-up units have the same function state and work value. Output is the same but not
Synchronous.
1. Fasten the effect light onto firm trussing (Use a 30-kg rated or stronger C-clamp fastened onto the
Quatro). Leave at least 1 meter on all sides for air circulation.
2. Plug one end of the electric mains power cord into the IEC socket on the unit.
Then plug the other end of the cord into a proper electric power supply socket.
3. Use a 3-p XLR cable to connect the Quatro and other devices.
The pins:
1. Earth
2. Signal -
3. Signal +
Link cables before connecting electric power
Note
1) Items and Contents shown in Display Segment
Item Content
MIDI-IN Channel
MIDI Note Number
DMX start channel on receiving signal
Chase or program
Chase speed (max. 99, min. 01)
Dimmer intensity
Normal MIDI Mode
MIDI Note Number start from 36 on receiving
MIDI signal (N:001 is equal to N:036 in normal mode).
2) Press and hold down button will quickly increase the value to the Max. Press and hold down button
will quickly decrease the value to the Min.
3) Link-up units should not amount too much as there is delay-time when transmitting messages to the
next unit. Otherwise some units would face apparent time delay.

13
Maintenance
The operator has to make sure that safety-relating and machine-technical installations are to be
inspected by an expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
1. All screws used for installing the device or parts of the device have to be tightly connected and must
not be corroded.
2. There may not be any deformations on housings, fixations and installation spots.
3. Mechanically moving parts like axles, eyes and others may not show any traces of wearing.
4. The electric power supply cables must not show any damages or material fatigue.
The Showtec Quatro requires almost no maintenance. However, you should keep the unit clean.
Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and
then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe glass clean with glass cleaner and
a soft cloth. Do not use alcohol or solvents.
The glass will require weekly cleaning, as smoke-fluid tends to build up residues, reducing the light-output
very quickly. The cooling-fan should be cleaned monthly with a soft brush.
Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections
with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying
electric power.
Changing the Lamp
1. Disconnect mains power supply, and allow 15 minutes to cool down. Loosen the 6 screws of housing.
2. Gently remove the metal housing.
3. Follow directions for installing a new lamp, page 7.
Replacing a Fuse
You don’t have to replace a fuse on this device. The fuse is an automatic fuse, which means in case of a
power surge, short-circuit or inappropriate electrical power supply, you simply have to pull the reset-lever
on the back, and the Quatro will function as before.
You may want to check why the problem occurred, so you can prevent this in the future.
Troubleshooting
No Light, No Movement
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
If the light effect does not operate properly, refer servicing to a technician.
Response: Suspect two potential problem areas: the power supply, the lamp, the fuse.
1. Power supply. Check that the unit is plugged into an appropriate power supply.
2. The lamp. Replace the old lamp with a new one with the same specifications. See page 7 for
replacing lamps.
No Response to DMX
Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card
malfunction.
1. Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power.
Try your DMX control again.
2. Determine whether the controller or light effect is at fault. Does the controller operate properly with
other DMX products ? If not, take the controller in for repair. If so, take the DMX cable and the light
effect to a qualified technician.

14
Product Specification
Model: Showtec Quatro
Voltage: 240V-50Hz (CE)
Power: 2000W
Automatic Fuse: 16A / 250V
Dimensions: 514x224x161mm (LxWxH)
Weight: 7,5 kg
Operation and Programming
Signal pin OUT: pin 1 earth, pin 2 (-), pin 3 (+)
Set Up and Addressing: control panel
DMX Channels: 4
Signal input 3-pin XLR male
Signal output 3-pin XLR female
Midi Input 5-pin socket
Midi Thru 5-pin socket
Lamp
Allowed lamp models*:
4 x Showtec R7S 500W (1500 hr) ordercode 82282
Minimum distance:
Minimum distance from flammable surfaces: 0.5m
Minimum distance to lighted object: 1.3m
*: Versions for other lamps may be produced. Please check the specification label on your product.
Design and product specifications are subject to change without prior notice.
Website: www.Highlite.nl
Email: [e-mail]

l
X
X
Showtech Date:15-04-2008
Model: Quatro MIDI Implementation Chart
function Transmitted Recognized Remarks
basic channel Default X 1
Changed X 1-16
Mode Default
Messages X X
A
ltered
Note number X 00-20/ 36-56 *1
True voice X X
V
elocity Note ON X O *2
Note OFF X X
After touch Key's X X
Channel X X
Pitch bend XX
Control change XX
Prog Change XX
True# X X
SysE
x
XX
Common Song pos X X
Song Sel
S
ong
S
e
X
X
Tune X X
System real time Clock X X
Commands X X
Aux Messages Local ON/OFF X X
All Notes OFF X X
Active Sense X X
Reset X X
O:YES Mode 1: OMNI ON, POLY Mode 2: OMNI ON, MONO
X:NO Mode 3: OMNI OFF, POLY Mode 4: OMNI OFF, MONO
*1
Table 1: note numbers Normal Mode
paramete
r
note number function
Intensity channel 1 0 Controls the intensity of channel 1
Intensity channel 2 1 Controls the intensity of channel 2
Intensity channel 3 2 Controls the intensity of channel 3
Intensity channel 4 3 Controls the intensity of channel 4
Preset 1 - 16 4 to 19 Selects preset 1 - 16
Chasing speed 20 Controls the chasing speed

Table 2: note numbers F36 Mode
paramete
r
note number function
Intensity channel 1 36 Controls the intensity of channel 1
Intensity channel 2 37 Controls the intensity of channel 2
Intensity channel 3 38 Controls the intensity of channel 3
Intensity channel 4 39 Controls the intensity of channel 4
Preset 1 - 16 40 to 55 Selects preset 1 - 16
Chasing speed 56 Controls the chasing speed
Table 3: note numbers Parralel Mode
paramete
r
note number function
Intensity channel 1-4 0 Controls the intensity of all four channels
Preset 1 - 16 4 to 19 Selects preset 1 - 16
Chasing speed 20 Controls the chasing speed
*2 In case of selecting presets: Velocity > 00 selects a preset and controls the intensity of the
program . Velocity = 00 turns a preset off.
Otherwise, Velocity 00-127 controls either chasing speed or intensity.