Show Tec Phantom 25MKII Spot LED User manual

Phantom 25MKII Spot LED V1
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 40204
MANUAL
ENGLISH

1
Ordercode: 40204
Phantom 25MKII LED Spot
Table of contents
Warning ...............................................................................................................................................................................3
Safety Instructions .........................................................................................................................................................3
Operating Determinations ..........................................................................................................................................5
Rigging ............................................................................................................................................................................5
Mounting a bracket to the underside of the Phantom 25 MKII LED Spot..........................................................5
Connection with the mains.........................................................................................................................................6
Return Procedure..........................................................................................................................................................7
Claims..............................................................................................................................................................................7
Description of the device.................................................................................................................................................8
Optional accessories....................................................................................................................................................8
Overview ........................................................................................................................................................................9
Backside .......................................................................................................................................................................10
Installation.........................................................................................................................................................................10
Set Up and Operation .....................................................................................................................................................10
Control Modes.............................................................................................................................................................11
One Phantom (Built-in Programs) .........................................................................................................................11
One Phantom (Sound-controlled)........................................................................................................................11
Multiple Phantoms (Master/Slave Control).........................................................................................................11
Multiple Phantoms (DMX Control) ........................................................................................................................12
Fixture Linking...............................................................................................................................................................13
Data Cabling...............................................................................................................................................................13
Control Panel ...............................................................................................................................................................14
DMX Control Mode.....................................................................................................................................................14
DMX Addressing ..........................................................................................................................................................14
Menu Overview...........................................................................................................................................................15
Main Menu Options....................................................................................................................................................16
1. DMX Address ........................................................................................................................................................16
2. Device mode .......................................................................................................................................................16
2.1 Built-in program slow .........................................................................................................................................17
2.2 Built-in program fast ..........................................................................................................................................17
2.3 Sound-contolled mode ....................................................................................................................................17
2.4 Slave Mode.........................................................................................................................................................17
3. Pan Mode .............................................................................................................................................................17
4. Tilt mode ................................................................................................................................................................17
5. Display....................................................................................................................................................................17
6. DMX configuration ..............................................................................................................................................17
7. Pan configuration................................................................................................................................................18
8. Tilt configuration...................................................................................................................................................18
9. Reset.......................................................................................................................................................................18
10. Load factory settings ........................................................................................................................................18
Service functions ......................................................................................................................................................18
DMX Channels .............................................................................................................................................................19
11 Channels ..............................................................................................................................................................19
6 Channels ................................................................................................................................................................21
Channel settings .........................................................................................................................................................22
Maintenance....................................................................................................................................................................23
Replacing the Fuse.....................................................................................................................................................23
Troubleshooting ...............................................................................................................................................................24
No Light.........................................................................................................................................................................24
No Response to DMX..................................................................................................................................................24

2
Ordercode: 40204
Phantom 25MKII LED Spot
Product Specifications....................................................................................................................................................26
Dimensions........................................................................................................................................................................27
Notes ..................................................................................................................................................................................28

3
Ordercode: 40204
Phantom 25MKII LED Spot
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
●Showtec Phantom 25MKII LED Spot
●Mounting bracket with 2 mounting screws
●IEC cable (length 0,9 m)
●User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
●be qualified
●follow the instructions of this manual
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

4
Ordercode: 40204
Phantom 25MKII LED Spot
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged.
Never place any material over the lens.
Never look directly into the light source.
Never leave any cables lying around.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this would reduce the device’s life.
Do not touch the device’s housing bare-handed during its operation. Allow the fixture to cool for at
least 5 minutes before handling.
Do not shake the device. Avoid brute force when installing or operating the device.
Only use device indoor, avoid contact with water or other liquids.
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord by the plug. Never pull out the plug by tugging the power cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
If the lens is obviously damaged, it has to be replaced. So that its functions are not impaired, due to
cracks or deep scratches.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Device must be installed out of the reach of children. Never leave the unit running
unattended.
Never attempt to bypass the thermostatic switch or fuses.
For replacement use fuses of same type and rating only.
The user is responsible for correct positioning and operating of the Phantom 25 MKII LED Spot. The
manufacturer will not accept liability for damages caused by the misuse or incorrect installation of
this device.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.

5
Ordercode: 40204
Phantom 25MKII LED Spot
Operating Determinations
This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
The minimum distance between light-output and the illuminated surface must be more than 1 meter.
The maximum ambient temperature ta = 40°C must never be exceeded.
The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
If this device is operated in any other way, than the one described in this manual, the product may
suffer damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, crash etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
If the Phantom is lowered from the ceiling or high joists, professional trussing systems have to be used.
Use a clamp to mount the Phantom, with the mounting-bracket, to the trussing system.
The Phantom must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety-cable.
When rigging, derigging or servicing the Phantom, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
Mounting a bracket to the underside of the Phantom 25 MKII LED Spot.

6
Ordercode: 40204
Phantom 25MKII LED Spot
The Phantom can be placed on a flat stage floor or mounted to any kind of truss by means of the
mounting bracket.
Improper installation can cause serious damage to people and property!
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Make sure that the device is always connected properly to the earth!
Improper installation can cause serious damage to people and property!

7
Ordercode: 40204
Phantom 25MKII LED Spot
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name.
02) Your address.
03) Your phone number.
04) A brief description of the symptoms.
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

8
Ordercode: 40204
Phantom 25MKII LED Spot
Description of the device
Features
The Showtec Phantom 25MKII LED Spot is a moving-head with high output and great effects.
DMX-control via standard DMX-controller
Built-in Automatic Programs + Built-in Sound activated programs
User-selectable Pan & Tilt ranges
Colourwheel with 9 dichroic-colours and white
Color functions: Split colors, Rainbow-flow effect
Static Gobowheel with 9 static gobos and open with Gobo Shake Function
Gobo functions: Gobo-flow effect, Gobo shake
8 automatic and 8 sound-to-light programs with master / slave function
Input Voltage: 100-240 VAC, 50/60Hz
Power consumption: 70W max. at full output
LED Source: 1x25W White LED
Control mode: Built-in programs, Sound-controlled, Master/Slave, DMX512
16 Built- in programs selectable by DMX
DMX Modes: 6 or 11 Channels
Beam angle: 17º
Output: 2912 Lux @ 3m
Dimmer: 0-100%
Strobe: 0-20Hz
Pan: 0º -- 540º
Tilt: 0º -- 270º
Pan/Tilt resolution: 16 bit
Focus: Manual focus
Special: Pan/ Tilt reverse & Black out by DMX
Power Connections: IEC Power connector IN and OUT
Data Connections: 3-pin XLR IN and OUT
Fuse: F2A / 250V
Housing: Black Metal & Flame-retardant plastic
Dimensions: 210 x 205 x 302 mm (LxWxH)
Weight: 4,86 kg
Note: Knowledge of DMX is required to fully utilize this unit.
Optional accessories
70351B 50 mm Half Coupler
70359B 50 mm Quick coupler
70368 50 mm Universal Moving Head Clamp
71302 Outdoor dome for LED Parcan / LED Multipars
D7010 Case for 2x Phantom 25/50
D7477 Case for 4x Phantom 25/50
D7495B Case for 2x Phantom 25/50

9
Ordercode: 40204
Phantom 25MKII LED Spot
Overview
Fig. 01
01) 1x 25W White LED (Lens has manual focus)
02) Cooling fan
03) Menu buttons and LED Display

10
Ordercode: 40204
Phantom 25MKII LED Spot
Backside
Fig. 02
04) IEC power connector IN
05) IEC power connector OUT
06) Fuse F2A / 250V
07) 3-pin DMX signal connector IN
08) 3-pin DMX signal connector OUT
Installation
Remove all packing materials from the Phantom 25MKII LED Spot. Check if all foam and plastic padding
is removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.

11
Ordercode: 40204
Phantom 25MKII LED Spot
Control Modes
There are 4 modes:
•Built-in programs
•Sound-controlled
•Master/Slave Mode
•DMX-512 (6CH, 11CH)
One Phantom (Built-in Programs)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) When the Phantom is not connected with a DMX-cable, it functions as a stand-alone device. Please
see page 17 for more information about the Built-in programs.
One Phantom (Sound-controlled)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) Turn on the music. If the device is set to sound-control, then the Phantom will react to the beat of
the music. Please see page 17 for more information about the Sound-control options.
Multiple Phantoms (Master/Slave Control)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Use a 3-pin XLR cable to connect the Phantom and other devices.
The pins:
01) Earth
02) Signal (-)
03) Signal (+)
05) Link the units as shown in (Fig.03). Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units. You can
use the same functions on the master device as described on page 17 (Built-in programs, Sound
controlled). This means that you can set your desired operation mode on the master device and all
slave devices will react the same as the master device.
Multiple Phantoms (Master/Slave Set Up)
Fig. 03

12
Ordercode: 40204
Phantom 25MKII LED Spot
Multiple Phantoms (DMX Control)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-pin XLR cable to connect the Phantoms and other devices.
04) Link the units as shown in (Fig.04), Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
05) Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the
other end of the mains power cord into proper electric power supply sockets, starting with the first
unit. Do not supply power before the whole system is set up and connected properly.
Multiple Phantoms (DMX Set Up)
Fig. 04
Note : Link all cables before connecting electric power

13
Ordercode: 40204
Phantom 25MKII LED Spot
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows on two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important:
Fixtures on a serial data link must be daisy chained in one single line. To comply with the
EIA-485 standard no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of Phantom Beams on a DMX data link: 30 fixtures
Data Cabling
To link fixtures together you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio DMX Data Cables
•DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin. Ordercode
FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
•DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
•DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
•DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
•DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).
•DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30.
The Phantom can be operated with a controller in control mode or without the controller in stand-alone
mode.

14
Ordercode: 40204
Phantom 25MKII LED Spot
Control Panel
A) LED display
B) Mode/ESC button
C) Up button
D) Down button
E) Enter button
Fig. 05
DMX Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address the next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign the DMX fixture address, which is the
first channel from which the Phantom will respond to the controller.
Please note when you use the controller, the unit has 11 channels.
When using multiple Phantoms make sure you set the DMX addresses right.
Therefore, the DMX address of the first Phantom should be 1(d001); the DMX address of the second
Phantom should be 1+11=12 (d012); the DMX address of the third Phantom should be 12+11=23 (d023),
etc. Please, be sure that you do not have any overlapping channels in order to control each Phantom
correctly.
If two or more Phantoms are addressed similarly, they will work similarly.
Controlling:
After having addressed all Phantom fixtures, you may now start operating these via your lighting
controller.
Note: After switching on, the Phantom will automatically detect whether DMX 512 data is received or not.
If there is no data received at the DMX-input, the “LED “ on the control panel will not flash.
The problem may be:
The XLR cable from the controller is not connected with the input of the Phantom.
The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It is necessary to insert an XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.

15
Ordercode: 40204
Phantom 25MKII LED Spot
Menu Overview

16
Ordercode: 40204
Phantom 25MKII LED Spot
Main Menu Options
DMX address
Device mode
Pan mode
Tilt mode
Display
DMX configuration
Pan configuration
Tilt configuration
Reset
Load factory default settings
1. DMX Address
With this menu you can set the DMX address.
01) Press the Mode/ESC button until the display shows .
02) Press the Enter button to confirm. You can choose 512 different DMX addresses.
03) Use the Up/Down buttons to select the required address from .
04) Once you have set the desired DMX address, press the Enter button to store your DMX address.
2. Device mode
With this menu you can choose a built-in program, sound controlled mode or set the device as a slave
device.
01) Press the Mode/ESC button until the display shows .
02) With the Up/Down buttons you can choose between the 4 modes:

17
Ordercode: 40204
Phantom 25MKII LED Spot
2.1 Built-in program slow
01) Press the Up/Down buttons until the display shows .
02) Press the Enter button to confirm, the display will show .
03) The device will start its slow built-in program immediately.
2.2 Built-in program fast
01) Press the Up/Down buttons until the display shows .
02) Press the Enter button to confirm, the display will show .
03) The device will start its fast built-in program immediately.
2.3 Sound-contolled mode
01) Press the Up/Down buttons until the display shows .
02) Press the Enter button to confirm, the display will show .
03) The device will react to the beat of the music.
2.4 Slave Mode
01) Press the Up/Down buttons until the display shows .
02) Press the Enter button to confirm, the display will show .
03) If the device has not been set to slave, it is automatically classified as a master device. All slave
devices will follow the master movement. If the device has been set to slave, it will react the same as
its master device.
3. Pan Mode
With this menu you can set the pan mode.
01) Press the Mode/ESC button until the display shows .
02) The device is now operating in normal pan mode.
03) Press the Up/Down buttons until the display shows .
04) The pan mode is now reversed.
4. Tilt mode
With this menu you can set the tilt mode.
01) Press the Mode/ESC button until the display shows .
02) The device is now operating in normal tilt mode.
03) Press the Up/Down buttons until the display shows .
04) The tilt mode is now reversed.
5. Display
With this menu you can set the display.
01) Press the Mode/ESC button until the display shows .
02) The device is now operating in normal display mode.
03) Press the Up/Down buttons until the display shows .
04) The display is now reversed.
6. DMX configuration
With this menu you can set the DMX configuration.
01) Press the Mode/ESC button until the display shows .
02) Now the device has 11 DMX channels.
03) Use the Up/Down buttons until the display shows .
04) Now the device has 6 DMX channels.

18
Ordercode: 40204
Phantom 25MKII LED Spot
7. Pan configuration
With this menu you can set the pan configuration.
01) Press the Mode/ESC button until the display shows .
02) Now the pan is 540º.
03) Press the Up/Down buttons to choose from 540º, 360ºor 180º.
8. Tilt configuration
With this menu you can set the tilt configuration.
01) Press the Mode/ESC button until the display shows .
02) Now the tilt is 270º.
03) Press the Up/Down buttons to choose from 270º, 180º or 90º.
9. Reset
With this menu you can reset the device.
01) Press the Mode/ESC button until the display shows .
02) Press the Enter button and the device will reset.
10. Load factory settings
With this menu you can upload the default factory settings.
01) Press the Mode/ESC button until the display shows .
02) Press the Enter button and the device will return to the default factory settings.
Service functions
The device has several service functions which can be changed by the user.
Press and hold the Mod/ESC button for 2 seconds.
The display wil show “0000”. Press the Up button to change the value.
Press the Down button to go to the next digit. Enter the password: 2323.
The display shows a new menu:
With the Mod/ESC button you can scroll through the menu. To change the values press the Up/Down
buttons. Press the Enter button to store your settings.
This option will auto-exit after 10 seconds if no button is pressed.

19
Ordercode: 40204
Phantom 25MKII LED Spot
DMX Channels
11 Channels
Channel 1 –Horizontal movement (Pan)
Push the slider up, in order to move head horizontally (PAN).
Gradual head adjustment, between 0-255. The head can be turned by 540° and stopped at any position
you wish.
Channel 2 –Vertical movement (Tilt)
Push the slider, up in order to move head vertically (TILT).
Gradual head adjustment, between 0-255. The head can be turned by 270° and stopped at any position
you wish.
Channel 3 –Pan fine 16 bit
Channel 4 –Tilt fine 16 bit
Channel 5 –Pan / Tilt speed
0-255
From Max Speed (0) to Min. Speed (255)
Channel 6 –Colorwheel (CH8 must be set between 001-255 and CH7 between 4-255 )
0-5
Open / White
6-11
Yellow
12-17
Pink
18-23
Green
24-29
Red
30-35
Light Blue
36-41
Orange
42-47
Dark Blue
48-53
Light Green
54-63
Bright Red
64-69
Split Color White / Yellow
70-75
Split Color Yellow / Pink
76-81
Split Color Pink / Green
82-87
Split Color Green / Red
88-93
Split Color Red / Light Blue
94-99
Split Color Light Blue / Orange
100-105
Split Color Orange / Dark Blue
106-111
Split Color Dark Blue / Light Green
112-117
Split Color Light Green / Bright Red
118-127
Split Color Bright Red / White
128-191
Clockwise rotation (CW) rainbow effect from slow to fast
192-255
Counter-clockwise rotation (CCW) rainbow effect from slow to
fast
Channel 7 –Shutter / Strobe (CH8 and CH6 or CH9 must be set between 001-255 )
0-3
Off
4-7
Shutter open
8-215
Linear strobe intensity, from slow to fast (0-20Hz)
216-255
Shutter open
Channel 8 –Dimmer
0-255
From dark to brightest 0-100%