Show Tec Star Dream 6x3m 128 LED RGB User manual

Star Dream 6x3m 128 LED RGB V1
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 40429
MANUAL
ENGLISH

1
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Table of contents
Warning ...............................................................................................................................................................................2
Safety Instructions .........................................................................................................................................................2
Operating Determinations ..........................................................................................................................................4
Rigging ............................................................................................................................................................................4
Connection with the mains.........................................................................................................................................6
Return Procedure..........................................................................................................................................................7
Claims..............................................................................................................................................................................7
Description of the device.................................................................................................................................................8
Overview ........................................................................................................................................................................9
Controller ......................................................................................................................................................................10
Installation.........................................................................................................................................................................10
Setup and Operation ......................................................................................................................................................10
Control Modes.............................................................................................................................................................11
One Star Dream (Static colors and Built-in programs) .....................................................................................11
One Star Dream (Sound-controlled)....................................................................................................................11
Multiple Star Dreams (Master/Slave control)......................................................................................................11
Multiple Star Dreams (DMX Control) ....................................................................................................................12
Fixture Linking...............................................................................................................................................................13
Data Cabling...............................................................................................................................................................13
Control Panel ...............................................................................................................................................................14
Control Mode ..............................................................................................................................................................14
DMX Addressing ..........................................................................................................................................................14
Menu Overview...........................................................................................................................................................15
Main Menu Options....................................................................................................................................................16
1. DMX Settings ............................................................................................................................................................17
1.1. Address...............................................................................................................................................................17
1.2. Channel..............................................................................................................................................................17
2. Static Colors .............................................................................................................................................................18
3. Built-in Programs......................................................................................................................................................19
4. Sound-controlled Programs..................................................................................................................................20
5. Advanced Settings.................................................................................................................................................21
5.1. Playback ............................................................................................................................................................21
5.2. Display ................................................................................................................................................................22
5.3. DMX Fail..............................................................................................................................................................22
5.4. Key Lock .............................................................................................................................................................22
5.5. Factory Reset.....................................................................................................................................................23
5.6. RGB or White .....................................................................................................................................................23
6. System Information .................................................................................................................................................24
DMX Channels .............................................................................................................................................................24
7 channels .................................................................................................................................................................24
28 channels...............................................................................................................................................................25
Maintenance....................................................................................................................................................................27
Troubleshooting ...............................................................................................................................................................27
No Light.........................................................................................................................................................................27
No Response to DMX..................................................................................................................................................27
Product Specifications....................................................................................................................................................29
Dimensions........................................................................................................................................................................30

2
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
●Showtec Star Dream LED curtain controller
●Pro power cable (1,5 m)
●1 x curtain 6x3m with 128 RGB LEDs
●User manual
LED Expected Lifespan
LEDs gradually decline in brightness over time. HEAT is the dominant factor that leads to the acceleration
of this decline. Packaged in clusters, LEDs exhibit higher operating temperatures than in ideal or singular
optimum conditions. For this reason, when all color LEDs are used at their fullest intensity, life of the LEDs is
significantly reduced. If improving the lifespan is of higher priority, place care in providing for lower
operational temperatures. This may include climatic-environmental and the reduction of overall
projection intensity.
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
●be qualified
●follow the instructions of this manual

3
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Before the initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes contained in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
●Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
●Never remove warning or informative labels from the unit.
●Never use anything to cover the ground contact.
●Never place any material over the LEDs.
●Never look directly into the light source.
●Never leave any cables lying around.
●Never use the device during thunderstorms, unplug the device immediately.
●Never leave various parts of the packaging (plastic bags, polystyrene foam, nails, etc.) within
children’s reach, as they are potential sources of danger.
●Do not connect this device to a dimmer pack.
●Do not switch the device on and off in short intervals, as this will reduce the device’s life.
●Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the fixture to cool for at least 5 minutes before handling.
●Do not shake the device. Avoid brute force when installing or operating the device.
●Only use the device indoors, avoid contact with water or other liquids.
●Only operate the device after having checked if the housing is firmly closed and all screws are tightly
fastened.
●Only operate the device after having familiarized with its functions.
●Avoid flames and do not put close to flammable liquids or gases.
●Always keep the case closed while operating.
●Always allow a free air space of at least 50 cm around the unit for ventilation.
●Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord holding it by the plug. Never pull out the plug by tugging the power cord.
●Make sure that the device is not exposed to extreme heat, moisture or dust.
●Make sure that the available voltage is not higher than stated on the rear panel.
●Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
●If the LEDs are obviously damaged, they need to be replaced, to prevent their functions from being
impaired.
●If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
●If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
●If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
●For adult use only. The fixture must be installed beyond the reach of children. Never leave the unit
running unattended.
●Never attempt to bypass the thermostatic switch or fuses.
●The user is responsible for correct positioning and operating of the Star Dream. The manufacturer will
not accept liability for damages caused by the misuse or incorrect installation of this device.
●This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.

4
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
●Repairs, servicing and electric connection must be carried out by a qualified technician.
●WARRANTY: Till one year after date of purchase.
Operating Determinations
●This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
●The minimum distance between light output and the illuminated surface must be bigger than
0,1 meter.
●The maximum ambient temperature ta= 45 °C must never be exceeded.
●In order to eliminate wear and improve the device’s lifespan, during periods of non-use, completely
disconnect from power source via breaker or by unplugging.
●The relative humidity must not exceed 50 % with an ambient temperature of 45 °C.
●If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
●If the Star Dream is lowered from the ceiling or high joists, professional trussing systems have to be
used.
●Use the textile hook and loop fastener strips (Velcro) or shock cords to install the Star Dream.
●The controller must never be fixed swinging freely in the room.
●The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
●When rigging, derigging or servicing the Star Dream, always make sure, that the area below the
installation site is secured and that there are not any unauthorized people around.

5
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Star Dream Curtain
One Star Dream
Multiple Star Dreams –Horizontal Installation

6
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Multiple Star Dreams –Vertical Installation
The Star Dream can be mounted to any kind of truss with hook and loop fasteners (Velcro) and/or shock
cords.
Improper installation can cause serious injuries and/or damage of property!
Connection with the mains
Connect the device to the mains with the power-plug.
Always check if the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Make sure that the device is always properly connected to the earth!
Improper installation can cause serious injuries and/or damage of property!

7
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the
fixture. Be prepared to provide the model number, serial number and a brief description of the cause for
the return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is
the customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name.
02) Your address.
03) Your phone number.
04) A brief description of the symptoms.
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
otherwise agreed in writing.
Complaints against us must be made known in writing or by fax within 10 working days after receipt of the
invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement of which the obligation is resulting.

8
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Description of the device
Features
The Star Dream 6x3m 128 LED RGB is a star curtain system with high output and great effects.
Curtain
●Light source: 128 x 5-mm RGB LED
●Data connector: 8 x curtain connectors
●Curtain: Heavy duty molton, flame-retardant in accordance with BS EN 1101:1996+A1:2006
●Assembly: Velcro and shock cords
●Curtain color: Black
●Dimensions: 6000 x 3000 mm (LxW)
●Weight: 11,5 kg
Controller
●Input voltage: 100–240V AC, 50/60 Hz
●Power consumption: 55 W
●Control: Static Colors, Built-in programs, Sound-controlled, Master/Slave, DMX
●Built-in programs: 10 programs + auto macro, with speed control
●Dimmer: 0–100 %
●Strobe: 0–25 Hz
●DMX channels: 7, 28 channels (RGB mode); 5, 12 channels (White mode)
●DMX connector: 3-pin XLR IN/OUT
●Data connector: 8 x curtain connectors OUT
●Color: Matt black
●Dimensions: 182 x 152 x 48 mm (LxWxH)
●Weight: 1,2 kg
Optional accessories
89300 –3 x Baseplate
89310 –3 x Baseplate pin
89331 –3 x Telescopic upright –3-way (180-420 cm)
89342 –2 x Telescopic drape support
89090 –Showtec Shockcord (25 cm)
D7422B –DAP Stack Case 3

9
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Overview
Fig. 01

10
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Controller
Fig. 02
01) LCD display + control buttons
02) Curtain connectors OUT
03) 3-pin DMX signal connector IN
04) 3-pin DMX signal connector OUT
05) Built-in microphone
06) 100–240 V pro power connector IN
07) Ground/earth connection
Installation
Remove all packing materials from the Star Dream 6x3m 128 LED RGB. Check if all foam and plastic
padding is removed. Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Setup and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 110V specification product on 230V power, or vice versa.
Connect the device to the main power supply.

11
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Control Modes
There are 5 modes:
●Static colors
●Built-in programs
●Sound-controlled
●Master/Slave
●DMX-512 (7CH, 28CH)
One Star Dream (Static colors and Built-in programs)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) When the Star Dream is not connected with a DMX cable, it functions as a stand-alone device.
Please see pages 18–19 for more information about Static colors and Built-in programs.
One Star Dream (Sound-controlled)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Plug the end of the electric mains power cord into a proper electric power supply socket.
03) Turn on the music. If the device is set to sound-control, then the Star Dream will react to the beat of
the music. Please see page 20 for more information about the sound-control options.
Multiple Star Dreams (Master/Slave control)
01) Fasten the effect light onto firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Use a 3-pin XLR cable to connect the Star Dream.
The pins:
01) Earth
02) Signal -
03) Signal +
03) Link the units as shown in Fig. 03. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX signal cable. Repeat this process to link the second, third, and fourth units.
You can use the same functions on the master device as described on pages 18–20 (Static colors,
Built-in programs or Sound-controlled mode). This means that you can set your desired operation
mode on the master device and all slave devices will react the same as the master device.
However, the master device should be set to MASTER mode and slave devices to STAND ALONE
mode. See page 21 for more information.
Multiple Star Dreams (Master/Slave control)
Fig. 03

12
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Multiple Star Dreams (DMX Control)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Use a 3-pin XLR cable to connect the Star Dreams and other devices.
04) Link the units as shown in Fig. 04. Connect the first unit's DMX "out" socket with the second unit's "in"
socket, using a DMX signal cable. Repeat this process to link the second, third, and fourth units.
05) Supply electric power: Plug electric mains power cords into each unit's pro power socket, then plug
the other end of the mains power cord into proper electric power supply sockets, starting with the
first unit. Do not supply power before the whole system is set up and connected properly.
Multiple Star Dreams DMX Setup
Fig. 04
Note : Link all cables before connecting electric power

13
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Fixture Linking
You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to
run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined
number of channels required by all the fixtures on a serial data link determines the number of fixtures the
data link can support.
Important:
Fixtures on a serial data link must be daisy-chained in a single line. To comply with the
EIA-485 standard, no more than 30 devices should be connected on one data link.
Connecting more than 30 fixtures on one serial data link without the use of a DMX optically
isolated splitter may result in deterioration of the digital DMX signal.
Maximum recommended DMX data link distance: 100 meters
Maximum recommended number of fixtures on a DMX data link: 30 fixtures
Maximum recommended number of fixtures on a power link @ 120V: 17 fixtures
Maximum recommended number of fixtures on a power link @ 230V: 35 fixtures
Data Cabling
To link fixtures together, you must obtain data cables. You can purchase DAP Audio certified DMX cables
directly from a dealer/distributor or construct your own cable. If you choose to create your own cable,
please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic
interference.
DAP Audio DMX Data Cables
●DAP Audio Basic microphone cable for allround use. bal. XLR/M 3-pin > XLR/F 3-pin. Ordercode
FL01150 (1,5 m), FL013 (3 m), FL016 (6 m), FL0110 (10 m), FL0115 (15 m), FL0120 (20 m).
●DAP Audio X-type data cable XLR/M 3-pin > XLR/F 3-pin. Ordercode FLX0175 (0,75 m),
FLX01150 (1,5 m), FLX013 (3 m), FLX016 (6 m), FLX0110 (10 m).
●DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL71150 (1,5 m), FL713 (3 m), FL716 (6 m), FL7110 (10 m).
●DAP Audio cable for the demanding user with exceptional audio-qualities and connector made by
Neutrik®. Ordercode FL7275 (0,75 m), FL72150 (1,5 m), FL723 (3 m), FL726 (6 m), FL7210 (10 m).
●DAP Audio 110 Ohm cable with digital signal transmission. Ordercode FL0975 (0,75 m),
FL09150 (1,5 m), FL093 (3 m), FL096 (6 m), FL0910 (10 m), FL0915 (15 m), FL0920 (20 m).
●DAP Audio data cable FL08 DMX/AES-EBU, XLR/M 5-pin > XLR/F 5-pin.Ordercode FL08150 (1,5 m),
FL083 (3 m), FL086 (6 m), FL0810 (10 m), FL0820 (20 m).
●DAP Audio DMX adapter: 5-pin/3-pin. Ordercode FLA29.
●DAP Audio DMX adapter: 3-pin/5-pin. Ordercode FLA30.
●DAP Audio DMX Terminator 3-pin. Ordercode FLA42.
●DAP Audio DMX Terminator 5-pin. Ordercode FLA43.

14
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
The Star Dream can be operated with a controller in control mode or without the controller in
stand-alone mode.
Control Panel
A) LCD display
B) UP button
C) DOWN button
D) ENTER button
E) MODE button
Fig. 05
Control Mode
The fixtures are individually addressed on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address, next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign DMX fixture addresses, which is the first
channel with which the Star Dream will respond to the controller.
Please note, when you use the controller, the unit has 28 channels.
When using multiple Star Dreams, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Star Dream should be 1(001); the DMX address of the second Star
Dream should be 1+28=29 (029); the DMX address of the third Star Dream should be 29+28=57 (057), etc.
Please, be sure that you do not have any overlapping channels in order to control each Star Dream
correctly. If two or more Star Dreams are addressed similarly, they will work similarly.
Controlling:
After having addressed all Star Dream fixtures, you may now start operating these via your lighting
controller.
Note: After switching on, the Star Dream will automatically detect whether DMX 512 data is received or
not.
If there is no data received at the DMX-input, the “LED“ on the control panel will not flash.
If not, the problem may be:
●The XLR cable from the controller is not connected with the input of the Star Dream.
●The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It is necessary to insert an XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
Display Off after 10 seconds
When no button is pressed for 10 seconds, the display will turn off.
To light up the display, you have to press the MODE button.
Once you have pressed the button, the display will light up.

15
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Menu Overview

16
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
Main Menu Options
DMX settings
Static colors
Built-in programs
Sound-controlled programs
Advanced settings
System information
Upon start-up, the device will show its current color mode (RGB or White) as well as the currently active
DMX channel mode.

17
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
1. DMX Settings
In this menu you can set the DMX address and choose the desired DMX channel mode.
01) While in the main menu, press the UP/DOWN buttons, until the display shows .
02) Press the ENTER button to open the menu. The display will show:
03) Press the UP/DOWN buttons to select one of the 2 options:
●ADDRESS
●CHANNEL
04) Press the ENTER button to open the menu.
1.1. Address
01) Press the UP/DOWN buttons to select the desired DMX starting address. The adjustment range is
between 001–512.
02) Press the ENTER button to save changes.
1.2. Channel
01) Press the UP/DOWN buttons to select the desired DMX channel mode.
02) Press the ENTER button to save changes.
Please note that the selectable DMX channel modes depend on the currently active color
mode (RGB or White).
Before you start programming, make sure that the device is in the appropriate color mode.
See page 23 for more information about setting the color mode.
The available DMX channel modes are:
●In RGB mode: 7, 28 channels
●In White mode: 5, 12 channels

18
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
2. Static Colors
In this menu you can set the static colors.
In order to be able to operate the Star Dream in this mode, disconnect the DMX cable from
the DMX input (03).
If you do not remove the cable, the light output will be blacked out.
01) While in the main menu, press the UP/DOWN buttons, until the display shows .
02) Press the ENTER button to open the menu. The display will show either of the 2 screens, depending
on the current color mode setting (RGB or White):
RGB mode
White mode
Please note that the selectable static colors depend on the currently active color mode
(RGB or White).
Before you start programming, make sure that the device is in the appropriate color mode.
See page 23 for more information about setting the color mode.
03) Press the UP/DOWN buttons to select the desired static color (only in RGB mode).
04) Press the ENTER button to edit the color.
05) Press the UP/DOWN buttons to set the color brightness. The adjustment range is between 0–255, from
dark to brightest.
06) Press the ENTER button again, to save changes and to proceed to strobe settings.
07) Press the UP/DOWN buttons to set the strobe frequency. The adjustment range is between 0–100,
from OFF to high frequency.
08) Press the ENTER button to save changes.

19
Ordercode: 40429
Star Dream 6x3m 128 LED RGB
3. Built-in Programs
In this menu you can run the built-in programs.
In order to be able to operate the Star Dream in this mode, disconnect the DMX cable from
the DMX input (03).
If you do not remove the cable, the light output will be blacked out.
01) While in the main menu, press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu. The display will show:
03) Press the UP/DOWN buttons to select one of the 10 built-in programs and the auto macro.
04) Press the ENTER button to edit the program.
05) Press the UP/DOWN buttons to set the program brightness. The adjustment range is between 0–255,
from dark to brightest.
06) Press the ENTER button again, to save changes and to proceed to program speed settings.
07) Press the UP/DOWN buttons to set the program speed. The adjustment range is between 0–100, from
slow to fast.
08) Press the ENTER button to save changes.