Show AW-8T User manual

TRANSMITTER UHF PLUGTRANSMITTER UHF PLUG
ON
INSTRUCTION
MANUAL
WIRELESS MICROPHONE
SYSTEM
AW-8T
R
Caution:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

1
E
INTRODUCTIOM:
1. The model is Plug-on transmitter.
2. It is designed for turning the cable hand - held dynamic microphone into a wireless mic-
rophone.
FEATURE:
MIC.INPUT
(XLR)
RELEASE BUTTON
9V BATTERY CHAMBER
1.
2.
3.
BOTTOM VIEW
CHANNEL SWITCH
4.
5.
POWER SWITCH
BATTERY LIGHT
6.
7.
POWER
ON OFF
Wireless Transmitter
AW-8T
PLL
67
R
CHANNEL
1
3
5
2 4
2
E
.
Dimensions
Weight
Carrier Frequency Range
Power Source
Tone Osc.Frequency
RF Power Output
SPECIFICATION
TRANSMITTER PERFORMANCE SPECIFICATION:
80g(0.18lb)
117mm/4.6"
UHF 790-865 Mhz
>45dBc
DC 9V
30mA
1%
5mW (TYPE)
MODEL: AW-8T DATE:7,27,2001 TESTER:T.S.HER
NO.
1
2
3
5
4
7
6
9
8
Spurious Emission
Tatol Harmonic Distortion
Current
32.768KHz
ELECTRIC PARAMETER SPECIFICATION
TRANSMITTER UHF PLUGTRANSMITTER UHF PLUG
TRANSMITTER UHF PLUGTRANSMITTER UHF PLUG
ON
BATTERY INSTALLATION:
MICROPHONE CONNECTION
Please press firmly insure locking.
TRANSMITTER UHF PLUGTRANSMITTER UHF PLUG
INSTRUCTION:
1. AFTER OPERATION THE MICRO
MUST BE SWITCHED OFFPHONE OTHERWISEAS WELL.
T SOON BE EXHAUTHE BAT ERIES WILL STED. IN ORDER TO AVOID UNTUNEFUL
IF PILOT LAMPCONSUPMPTIO OF THE INNER BATTERY: OF THE WIRELESS MICROPHONE
IT MEANS(1)REMAINS LIGHTED, THAT THE BATTERY HAS NO MORE POWER: (2)THE
FLASH ONLY FOR THE TIME OF THE SWITCHING -ON; THIS INDICATES THAT
THE MICROPHONE WORKS WELL.
2. INSTALL BATTERY:
PLS. MAKE SURE THE POSITIVE/NEGATIVE
BEFORE YOU REPLACEMENT BATTERIES.
LAMP MUST
WE CONGRATULATE YOU FOR THE CHOICE OF THIS EXCELLENT PROFESSIONAL
HIGH FIDELITY. SPEECH, MEETING SPEECH,THE MICROPHONE SUIT FOR SCHOOL
TEA STAGE. TO AVOID OF PROBLEM LIKE WIRELESSCHERS AND PERFORMER ON THE
MICROPHONE. NECTION IN EVERY WORKINGTHE BODY PACK MICROPHONE CON
CONDITION.
APPARATUS MICROPHONE WHICH WILL GIVE YOU OUTSTANDING RESULTS AT THE
WHEN SWITCHES THE POWER SWITCH TO "ON" POSITION ,THEN THE POWER INDICATOR
LIGHTS ,INDICATS THE APPARATUS IS ON.
WHEN SWITCHES THE POWER SWITCH TO "OFF"POSITION ,THEN THE POWER INDICATOR
EXINDICATS THE APPARATUS IS OFF.
3.
4. IF YOU WANT TO HAVE A DIFFERENT FREQUENCY, SET THE RECEIVER AND TRANSMITTER
POWER SW TO OFF BEFORE YOU DO.