Showgear VIBE FX Strike User manual

VIBE FX Strike V1
Highlite International B.V. –Vestastraat 2 –6468 EX –Kerkrade –the Netherlands
Ordercode: 950200
MANUAL
ENGLISH

1
Ordercode: 950200
VIBE FX Strike
Table of contents
Warning ...............................................................................................................................................................................2
Safety Instructions .........................................................................................................................................................2
Operating Determinations ..........................................................................................................................................4
Laser Safety For a Class 2 Laser Product ..................................................................................................................5
Rigging ............................................................................................................................................................................7
Connection with the mains.........................................................................................................................................7
Return Procedure..........................................................................................................................................................8
Claims..............................................................................................................................................................................8
Description of the device.................................................................................................................................................9
Overview ........................................................................................................................................................................9
Backside .......................................................................................................................................................................10
Installation.........................................................................................................................................................................10
Set Up and Operation .....................................................................................................................................................10
Control Modes.............................................................................................................................................................11
One Strike (Auto, Intelligent)..................................................................................................................................11
One Strike (Sound-controlled)...............................................................................................................................11
Remote Control...........................................................................................................................................................11
1. Auto Mode............................................................................................................................................................12
2. Sound-controlled Mode .....................................................................................................................................12
3. Intelligent Mode...................................................................................................................................................12
Maintenance....................................................................................................................................................................12
Troubleshooting ...............................................................................................................................................................13
No Light.........................................................................................................................................................................13
Product Specifications....................................................................................................................................................14

2
Ordercode: 950200
VIBE FX Strike
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
●Showgear VIBE FX Strike
●1 x mounting bracket
●2 x mounting screws
●5V DC power adapter (1 m)
●IR remote control
●User manual
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
●be qualified
●follow the instructions of this manual
Before the initial start-up, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes contained in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.

3
Ordercode: 950200
VIBE FX Strike
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
●Never let the power cord come into contact with other cables! Handle the power cord and all
connections with the mains with particular caution!
●Never remove warning or informative labels from the unit.
●Never use anything to cover the ground contact.
●Never lift the fixture holding it by the projector-head, as the mechanics may be damaged. Always
hold the fixture by the transport handles.
●Never place any material over the lens.
●Never look directly into the light source.
●Never leave any cables lying around.
●Never aim the laser beam at people or animals!
●Never use the device during thunderstorms, unplug the device immediately.
●Never point a laser at aircraft, this is a federal offense.
●Never point unterminated laser beams into the sky.
●Never open the laser housing. The high laser power levels inside of the protective housing can start
fires, burn skin and will cause instant eye injury.
●Do not connect this device to a dimmer pack.
●Do not open the device and do not modify the device.
●Do not point lasers at highly reflective surfaces such as windows, mirrors and shiny metal. Even laser
reflections can be hazardous.
●Do not expose the output optic (aperture) to cleaning chemicals.
●Do not use laser if the laser appears to be emitting only one or two beams.
●Do not use laser if housing is damaged or open, or if optics appear damaged in any way.
●Do not operate laser without first reading and understanding all safety and technical data in this
manual. Never look into the laser aperture or laser beams.
●Do not switch the device on and off in short intervals, as this will reduce the device’s life.
●Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Allow the fixture to cool for at least 5 minutes before handling.
●Do not shake the device. Avoid brute force when installing or operating the device.
●After set up and prior to public use, test laser to ensure proper function. Do not use the laser if any
defect is detected. Do not use, if the laser emits only one or two laser beams rather than
dozens/hundreds, as this could indicate damage to the diffraction grating optic, and could allow
emission of higher laser levels.
●Only use the device indoors, avoid contact with water or other liquids.
●Only operate the fixture after having checked if the housing is firmly closed and all screws are tightly
fastened.
●Only operate the device after having familiarized with its functions.
●Avoid flames and do not put close to flammable liquids or gases.
●Always check the regulations when using a class 2 laser product.
●Always check and position the laser before anybody enters the room, when the laser is facing an
area with people.
●Always keep the case closed while operating.
●Always allow a free air space of at least 50 cm around the unit for ventilation.
●Always disconnect power from the mains, when device is not used or before cleaning! Only handle
the power cord holding it by the plug. Never pull out the plug by tugging the power cord.
●Make sure that the device is not exposed to extreme heat, moisture or dust.
●Make sure that the available voltage is not higher than stated on the rear panel.
●Make sure that the power cord is never crimped or damaged. Check the device and the power
cord from time to time.
●If the external cable is damaged, it has to be replaced by a qualified technician.
●If the lens is obviously damaged, it has to be replaced, so that its functions are not impaired due to
cracks or deep scratches.
●If device was dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.

4
Ordercode: 950200
VIBE FX Strike
●If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
●If your Showgear device fails to work properly, discontinue the use immediately. Pack the unit
securely (preferably in the original packing material), and return it to your Showgear dealer for
service.
●For adult use only. The fixture must be installed beyond the reach of children. Never leave the unit
running unattended.
●Never attempt to bypass the thermostatic switch or fuses.
●For replacement use fuses of same type and rating only.
●The operation of a class 2 laser show laser is only allowed if the show is controlled by a skilled and
well-trained operator familiar with the data included in this manual.
●The user is responsible for correct positioning and operating of the Strike. The manufacturer will not
accept liability for damages caused by the misuse or incorrect installation of this device.
●This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
●The laser will only work between 10-40ºC.
●After 3 hours working, you must shut off the laser and let the laser diode cool off for 30 minutes.
Otherwise the laser could become damaged and the warranty becomes void.
●Repairs, servicing and electric connection must be carried out by a qualified technician.
●WARRANTY: Till one year after date of purchase.
Operating Determinations
●This device is not designed for permanent operation. Consistent operation breaks will ensure that the
device will serve you for a long time without defects.
●The minimum distance between light output and the illuminated surface must be bigger than 1
meter.
●The maximum ambient temperature ta= 40°C must never be exceeded.
●The relative humidity must not exceed 50 % with an ambient temperature of 40°C.
●If this device is operated in any other way than the one described in this manual, the product may
suffer damages and the warranty becomes void.
●Any other operation may lead to dangers like short-circuit, burns, electric shock, crash, etc.
You endanger your own safety and the safety of others!

5
Ordercode: 950200
VIBE FX Strike
Laser Safety For a Class 2 Laser Product
Laser Light is different from any other light source with which you may be familiar with. The light from this
product can potentially cause instant eye injury if not set up and used properly.
Laser light is thousands of times more concentrated than light from any other kind of light source. This
concentration of light power can cause instant eye injuries, primarily by burning the retina (the light
sensitive portion at the back of the eye). Even if you cannot feel “heat” from a laser beam, it can still
potentially injure or blind you or your audience.
Even very small amounts of laser light are potentially hazardous even at long distances. Laser eye injuries
can happen quicker than you can blink.
It is incorrect to think that because these laser products split the laser into hundreds of beams or the laser
beam is scanned out in high speed, that an individual laser beam is safe for eye exposure. This laser
product uses dozens of milliwatts of laser power (Class 2 levels internally). Many of the individual beams
are potentially hazardous to the eyes.
It is also incorrect to assume that because the laser light is moving, it is safe. This is not true. Nor, do the
laser beams always move. Since eye injuries can occur instantly, it is critical to prevent the possibility of
any direct eye exposure. According to the laser safety regulation, it is not legal to aim Class 2 lasers in
areas which people can get exposed. This is true even if it is aimed below people’s faces, such as on a
dance floor.
CAUTION! Only Laser Safety Officers who are officially certified by a regulatory body or authorized
training organization are allowed to use class 2 lasers in public. The Laser Safety Officer is responsible for
all aspects when using this laser, including following all locally applicable safety laws and regulations.
The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of
this laser.
CAUTION: AVOID EXPOSURE TO BEAM: Avoid direct eye contact with laser
light. Never intentionally expose your eyes or others to direct laser radiation.
Compliance Statement
Your Strike laser has been designed to comply with FDA and IEC Standards for its classification.
The Strike is a Class 2 laser product.
Laser Safety and Compliance Information
The Strike is manufactured to comply with the IEC 60825-1 and in accordance with U.S. Food and Drug
Administration (FDA) Standards Listed under FDA Document 21 CFR 1040 and subsequent laser notices.
Product Classification and Manufacturing Label Identification
Laser Classification
Class 2
Laser medium
wavelength 650 nm / Red (Laser Diode) ; Output >80mW
wavelength 532 nm / Green (Laser Diode); Output >20mW
Output
100mW

6
Ordercode: 950200
VIBE FX Strike
The legal requirements for using laser entertainment products vary from country to country. The user is
responsible for the legal requirements at the location/country of use.
Further guidelines and safety programs for safe use of lasers can be found in the ANSI Z136.1 Standard
“For Safe Use of Lasers”, available from www.laserinstitute.org. Many local governments, corporations,
agencies, military and others, require all lasers to be used under the guidelines of ANSI Z136.1. Laser
Display guidance can be obtained via the International Laser Display Association, www.laserist.org.
CAUTION: The use of corrective eye wear or optics for viewing at distances such as telescopes or
binoculars within a distance of 100mm may pose an eye hazard.
This laser product is a Class 2 laser.
There are no user serviceable parts inside. Tampering or
removing warranty seals will void your products limited
warranty.
Proper Usage Safety and Compliance Information
According to FDA Regulations you should
operate this product as stated on the left.

7
Ordercode: 950200
VIBE FX Strike
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all
other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
●If the Strike is lowered from the ceiling or high joists, professional trussing systems have to be used.
●Use a clamp to mount the Strike, with the mounting bracket, to the trussing system.
●The Strike must never be fixed swinging freely in the room.
●The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety cable.
●When rigging, derigging or servicing the Strike, always make sure, that the area below the installation
site is secured and that there are not any unauthorized people around.
The VIBE FX Strike can be placed on a flat stage floor or be mounted to any kind of truss with a clamp.
Improper installation can cause serious injuries and/or damage of property!
Connection with the mains
Connect the device to the mains with the power-plug.
Always check if the right color cable is connected to the right place.
International
EU Cable
UK Cable
US Cable
Pin
L
BROWN
RED
YELLOW/COPPER
PHASE
N
BLUE
BLACK
SILVER
NEUTRAL
YELLOW/GREEN
GREEN
GREEN
PROTECTIVE GROUND
Make sure that the device is always properly connected to the earth!
Improper installation can cause serious injuries and/or damage of property!

8
Ordercode: 950200
VIBE FX Strike
Return Procedure
Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued.
Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned
without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Call Highlite 0031-455667723 or mail [e-mail] and request an RMA prior to shipping the fixture.
Be prepared to provide the model number, serial number and a brief description of the cause for the
return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the
customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace
product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use.
Note: If you are given an RMA number, please include the following information on a piece of paper
inside the box:
01) Your name
02) Your address
03) Your phone number
04) A brief description of the symptoms
Claims
The client has the obligation to check the delivered goods immediately upon delivery for any short-
comings and/or visible defects, or perform this check after our announcement that the goods are at their
disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be
reported to the carrier upon receipt of merchandise.
It is the customer's responsibility to report and submit claims with the shipper in the event that a fixture is
damaged due to shipping. Transportation damage has to be reported to us within one day after receipt
of the delivery.
Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with
a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless
agreed otherwise in writing.
Complaints against us must be prepared in writing or sent by fax within 10 working days after receipt of
the invoice. After this period complaints will not be handled anymore.
Complaints will only then be considered if the client has so far complied with all parts of the agreement,
regardless of the agreement from which the obligation is resulting.

9
Ordercode: 950200
VIBE FX Strike
Description of the device
Features
The VIBE FX Strike is a laser effect with high output and great effects.
●Power supply: 100-240V AC 50/60Hz; 5V/1A DC via the included power adapter
●Laser class: 2
●Laser safety: EN/IEC 60825-1 Ed 2, 2007-03
●Laser color: Red, Green
●Laser power: 100mW:
wavelength 532 nm / Green (Laser Diode), 20mW
wavelength 650 nm / Red (Laser Diode), 80mW
●Control modes: Auto, Sound, Intelligent
●Housing: Metal & flame-retardant plastic
●IP rating: IP-20
●Dimensions: 107 x 105 x 90 mm (LxWxH)
●Weight: 0,2 kg
Overview
Fig. 01
01) Mounting bracket
02) Laser lens
03) MODE button
Press the button to select the desired operation mode. There are 3 operation modes:
●Auto mode: The LED indicator (04) will light in red.
●Sound-controlled mode: The LED indicator (04) will light in green.
●Intelligent mode: The LED indicator (04) will light in orange.
04) LED mode indicator
The LED indicator shows the currently selected operation mode.
05) IR sensor
06) Built-in microphone
07) Adjustment screw

10
Ordercode: 950200
VIBE FX Strike
Backside
Fig. 02
08) 5V DC power adapter connector IN
09) Cooling fan
Installation
Remove all packing materials from the VIBE FX Strike. Check if all foam and plastic padding is removed.
Connect all cables.
Do not supply power before the whole system is set up and connected properly.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Connect the device to the main power supply.
Exclusion of Liability
Be aware that in some countries, there are additional regulations, regarding the use of laser devices.
Therefore, we strongly advise you to verify your national laws with your authorities: We do not take any
responsibility for eventual discrepancies, changes or adaptions regarding lawful use of laser devices.

11
Ordercode: 950200
VIBE FX Strike
Control Modes
There are 3 modes:
●Auto
●Sound-controlled
●Intelligent
One Strike (Auto, Intelligent)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) The Strike functions as a stand-alone device. See page 12 for more information about Auto and
Intelligent mode.
One Strike (Sound-controlled)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Turn on the music. If the device is set to sound-control, then the Strike will react to the beat of the
music. Please see page 12 for more information about the sound-control options.
Remote Control
Fig. 03
Button
Function
Description
Blackout
Press to black out the output/restore the output.
Intelligent
Press to activate Intelligent mode.
Auto/Sound
Press to activate Auto or Sound-controlled mode.
Motor rotation ON/OFF
Repeatedly press to activate/deactivate the motor rotation.
Laser color
Repeatedly press to set the laser color (red, green, red+green).
Rotating speed
Repeatedly press to set the rotation speed. There are 5 steps,
from slow to fast.
Step speed
Repeatedly press to set the step speed. There are 5 steps, from
slow to fast.
Flash frequency
Repeatedly press to set the strobe frequency. There are 3 steps
(from low to high frequency) and OFF.
MIC sensitivity
Repeatedly press to decrease/increase the sound sensitivity.

12
Ordercode: 950200
VIBE FX Strike
1. Auto Mode
01) Repeatedly press the MODE button (03) (or press the button) until the LED indicator (04) lights in
red.
02) The device will now run the built-in auto show.
03) Press the function buttons on the remote control to adjust settings (see page 11 for more
information).
2. Sound-controlled Mode
01) Repeatedly press the MODE button (03) (or press the button) until the LED indicator (04) lights in
green.
02) The device will now react to the beat of the background music.
03) Press the function buttons on the remote control to adjust settings (see page 11 for more
information).
3. Intelligent Mode
01) Repeatedly press the MODE button (03) (or press the button) until the LED indicator (04) lights in
orange.
02) The device will now run the built-in auto show. The device will also react to the beat of the
background music (when music is present).
03) Press the function buttons on the remote control to adjust settings (see page 11 for more
information).
Maintenance
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
01) All screws used for installing the device or parts of the device have to be tightly connected and
must not be corroded.
02) There may not be any deformations on housings, fixations and installation spots.
03) Mechanically moving parts like axles, eyes and others may not show any traces of wearing.
04) The electric power supply cables must not show any damages or material fatigue.
The VIBE FX Strike requires almost no maintenance. However, you should keep the unit clean.
Otherwise, the fixture’s light output will be significantly reduced. Disconnect the mains power supply, and
then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and
a soft cloth. Do not use alcohol or solvents.
The front lens will require weekly cleaning, as smoke-fluid tends to build up residues, reducing the light
output very quickly.
Please clean internal components once a year with a light brush and vacuum cleaner.

13
Ordercode: 950200
VIBE FX Strike
Troubleshooting
This troubleshooting guide is meant to help solve simple problems.
If a problem occurs, carry out the steps below in sequence until a solution is found. Once the unit
operates properly, do not carry out following steps.
No Light
If the light effect does not operate properly, refer servicing to a technician.
Suspect two potential problem areas as: the power supply and the laser.
01) Power supply. Check if the unit is plugged into an appropriate power supply.
02) The laser. Return the Strike to your Showgear dealer.
03) If all of the above appears to be O.K., plug the unit in again.
04) If you are unable to determine the cause of the problem, do not open the Strike, as this may
damage the unit and the warranty will become void.
05) Return the device to your Showgear dealer.
Problem
Probable cause(s)
Remedy
The fixture does
not function at all
No power to the fixture.
Check if power is switched on.
Internal fuse blown.
Disconnect fixture and return to your
dealer.
No light or laser
cuts out
intermittently
Fixture is too hot.
Allow fixture to cool.
Make sure the air vents are not
blocked.
Turn up the air conditioning .
Laser damaged
Disconnect fixture and return to your
dealer.
The power supply settings do not
match local voltage and
frequency.
Disconnect fixture. Check settings and
correct if necessary.

14
Ordercode: 950200
VIBE FX Strike
Product Specifications
Model:
Showgear VIBE FX Strike
Power supply:
100-240V AC 50/60Hz; 5V/1A DC via the included power
adapter
Dimensions:
107 x 105 x 90 mm (LxWxH)
Weight:
0,2 kg
Electro-mechanical effects
Laser class:
2
Laser color:
Red, Green
Laser power:
100mW (80mW 650nm Red, 20mW 532nm Green)
Control modes:
Auto, Sound, Intelligent
Housing:
Metal & flame-retardant plastic
Connections:
Micro USB power adapter IN
Laser safety:
EN/IEC 60825-1 Ed 2, 2007-03
IP rating:
IP-20
Max. ambient temperature ta:
40°C
Max. housing temperature tB:
70°C
Minimum distance:
Minimum distance from flammable surfaces:
0.5 m
Minimum distance to lighted object:
1 m
Design and product specifications are subject to change without prior notice.
Email: [e-mail]

©2017 Showgear