Shuttle BR06 User instructions

BR06
Register Mode
Setting
2016.11.11 V0.1

Setup1. press the [＋Add] to start adding users.
Icon □ashows the host name, you can touch here to switch IP and SW version.
Icon □bis the network connection status.
Setup2. Type user ID and Name. And then select a Group, [Groups are set in server]
Finally press the Save and the Next button.
①
①
②
③
④
⑤
□
a
□
b

Setup3. Register Face.
˙Press the Enroll button to capture face feature.
˙Press the Test button to verification discern.
˙Press the Save button to next.
[If you only register the face, next press Done]
④
①
②
③

Setup4. Register Finger.
˙Press the Enroll button to capture finger feature.
˙Press the Test button to verification discern.
˙Press the Save button to next.
[If you only register the face & finger, next press Done]
①
②
③
④

Setup5. Register RFID.
˙Press the Enroll button and put your MIFARE card in front of the induction place.
˙Press the Test button to verification the card.
˙Press the Save button to next..
[If you only to register the face & RFID, next press Done]
①
②
③
④

＊About Search and modify user information.
①Select ID or Name.
②Type a ID or Name.
③Press the Search button to next.
˙Press the [pen icon] to edit.
You can modify the “NAME”and “Group”or press Next button to register more or register again.
(Same the Setup2.)
①
②
③
˙Edit