Shuttle P15WL01 User manual

User Manual
P15WL01/ P15AL01/ P15EL01

The illustrations in this user’s manual are for reference only.
Actual product specifications may vary with territories.
The information in this user’s manual is subject to change without
notice.
THE MANUFACTURER OR RESELLER SHALL NOT BE LIABLE
FOR ERRORS OR OMISSIONS CONTAINED IN THIS MANUAL
AND SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL
DAMAGES, WHICH MAY RESULT FROM THE PERFORMANCE
OR USE OF THIS MANUAL.
The information in this user’s manual is protected by copyright laws.
No part of this manual may be photocopied or reproduced in any
form without prior written authorization from the copyright owners.
Product names mentioned herein may be trademarks and/or
registered trademarks of their respective owners/companies.
The software described in this manual is delivered under a license
agreement. The software may be used or copied only in accordance
with the terms of the agreement.
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Reverse engineering or disassembly is prohibited.
Do not throw this electronic device into the trash when
discarding. To minimize pollution and ensure utmost protection
of the global environment, please recycle.
For more information on the Waste from Electrical and
Electronics Equipment (WEEE) regulations, visit
http://ec.europa.eu/environment/waste/weee/index_en.htm
Notice

TABLE OF CONTENTS
Notice ...................................................................................................... 2
Preface .................................................................................................... 4
1.1 Regulations information.......................................................... 4
1.2 Safety instructions .................................................................. 5
1.2 Consignes de sécurité ............................................................ 6
1.3 Notes for this manual.............................................................. 7
1.4 Release history....................................................................... 7
Getting to know the basics ...................................................................... 8
2.1 Product speci󰘰cation .............................................................. 8
2.2 Product overview .................................................................. 12
2.3 Product dimensions .............................................................. 15
Getting Started ...................................................................................... 16
3.1 M.2 Device Installation ......................................................... 17
3.2 Memory Module Installation.................................................. 18
3.3 How to replace the M.2 SSD ................................................ 20
3.4 Optional installation of WLAN antennas
(appropriate chassis version required) ................................. 22
3.5 Powering on the system ....................................................... 23
3.6 Potential equalization (optional) ........................................... 24
3.7 VESA mounting to the wall (optional) ................................... 25
3.8 How to use the Touch Panel ................................................ 26
3.9 Cleaning the screen.............................................................. 26
3.10 Using the Vertical Stand (optional) ..................................... 27
BIOS Setup............................................................................................ 28
4.1 About BIOS Setup ................................................................ 28
4.1.1 When to Use BIOS Setup ?........................................ 28
4.1.2 How to run BIOS Setup ?........................................... 28

4
English
Preface
CAUTION: Any changes or modifications not expressly approved
by the guarantee of this device could void the user's
authority to operate the equipment.
1.1 Regulations information
• CE compliance
This device is classed as a technical information equipment (ITE)
in class A and is intended for use in commercial, transport, retailer,
public, automation…field.
• FCC rules
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THIS PRODUCT CONTAINS A BUTTON BATTERY
WARNING
If swallowed, a lithium button battery can cause severe or
fatal injuries within 2 hours.
Keep batteries out of reach of children.
If you think batteries may have been swallowed or placed
inside any part of the body,seek immediate medical attention.

5
English
The following safety precautions will increase the life of the panel PC.
Follow all Precautions and instructions.
Do not place this device underneath heavy loads or in an
unstable position.
Do not use or expose this device around magnetic fields
as magnetic interference may affect the performance of
the device.
Do not expose this device to high levels of direct sunlight,
high-humidity or wet conditions.
Do not block the air vents to this device or impede the
airflow in any way.
Do not expose to or use near liquid, rain, or moisture.
Never pour any liquid into an opening. This may cause
damage or electrical shock.
• The unit can be operated at an ambient temperature
of max.40°C (104°F). Do not subject it to temperatures
below 0°C (32°F) or above 40°C (104°F).
1.2 Safety instructions
CAUTION: Incorrectly replacing the battery may damage this com-
puter. Replace only with the same or equivalent type
recommended by the manufacturer. Disposal of used
batteries according to the manufacturer's instructions.

6
English
Français
Les mesures de précaution suivantes servent à prolonger la durée
de vie de l'ordinateur. Par conséquent, veuillez observer l'ensemble
des mesures de précaution et des instructions.
1.2 Consignes de sécurité
ATTENTION : Ne pas replacer correctement la pile peut endom-
mager l’ordinateur. La remplacer uniquement par un
modèle identique ou un équivalent recommandé par
fabricant. Débarrassez-vous des piles usagées d’
après les instructions du constructeur.
Ne pas poser d'objets lourds sur l'appareil ou ne pas le
mettre pas dans une position instable.
Ne pas exposer l'appareil à de forts champs magnétiques,
puisque cela pourrait causer des interférences.
Ne pas exposer l'appareil directement aux rayons du soleil,
à l'humidité ou ne pas le placer dans un endroit humide.
Ne pas couvrir la fente d'aération de l'appareil ou ne pas
empêcher la circulation d'air de quelque sorte que ce soit.
Ne pas utiliser l'appareil à proximité de liquides,
de pluie ou d'humidité.
Ne pas utiliser le modem pendant un orage.
• L'appareil peut être utilisé à une température ambiante
maximum de 40°C (104°F). Ne pas exposer l'appareil à
une température inférieure à 0°C (21°F) ou supérieure à
40°C (104°F).

7
English
CAUTION! Important information that must be followed for safe
operation.
1.3 Notes for this manual
NOTE: Information for special situations.

1.4 Release history
Version Revision note
1.0 First released
Date
10.2023

8
English
Getting to know the basics
2.1 Product speci󰘰cation
This User’s Manual provides instructions and illustrations on how to
operate this panel PC. It is recommended to read this manual carefully
before using this panel PC.
NOTE: The product’s specification will depend upon the actually
shipped product.
System
Processor
P15WL01
8th Gen. Intel®Whiskey Lake-U series Processors –
Intel®Core™ i7-8665UE vPro
Intel®Core™ i7-8565U
Intel®Core™ i5-8365UE vPro
Intel®Core™ i5-8265U
Intel®Core™ i3-8145UE
Intel®Celeron 4305UE
P15EL01
Intel®Elkhart Lake CPU, Atom®x6425E, 4 Core,
1.5M Cache, 2.0GHz (3.0GHz), 12W (optional)
Pentium®J6426, 4 Core, 1.5M Cache,
2.0GHz (3.0GHz), 10W (optional)
Celeron®J6412, 4 Core, 1.5M Cache,
2.0GHz (2.6GHz), 10W (optional)
P15AL01
12th Gen. Intel®Alder Lake-U series Processors –
Intel®Core™ i7-1265UE vPro
Intel®Core™ i7-1255U vPro
Intel®Core™ i5-1245UE vPro
Intel®Core™ i5-1235U vPro
Intel®Core™ i3-1215UE
Intel®Core ™ i3-1215U
Intel®Celeron 7305E

9
English
Memory
P15WL01 2 x 260 pin SO-DIMM up to 64GB,
Dual Channel 1.2 V DDR4 2400MHz
P15EL01 2 x 260 pin SO-DIMM up to 32GB,
Dual Channel 1.2 V DDR4 3200MHz
P15AL01 2 x 262 pin SO-DIMM up to 64GB,
Dual Channel 1.1 V DDR5 4800MHz
Display and Touch Screen
Display 15.6” 1920x1080 Full HD LED
with 10-Point Capacitive Multi-Touch
Brightness 250/350/450 nits (default 350nits)
Graphics
Chipset Intel®UHD Graphics
Display Interface
Supports two independent displays
1 x HDMI 1.4b: 4096 x 2160@30Hz
1 x DVI-I: 1920 x 1080@60Hz (optional daughter board)
1 x VGA (optional daughter board)
Storage
Storage
1 x M.2 2280, M key (PCIe x4 or SATA, either one)
Option: 1 x M.2 2280, M key, SSD SATA I/F, Slidable design
1 x M.2 2280, M key, SSD SATA I/F, Fixed design
(Either one of above)
Audio
Audio Codec Realtek ALC6662

10
English
Network
Ethernet
1 x Intel®2.5 GbE
1 x Intel®GbE LAN or 2.5 GbE (optional)
(Support Wake on Lan)
WLAN
1x M.2 2230, M key
Realtek RTL8821C (optional)
( 802.11a/b/g/n/ac + Bluetooth 4.2 with 2x internal antenna
(default) / 2x external antenna (optional))
I/O Interface
LAN 1 x RJ-45 Gigabit Ethernet
1 x RJ-45 2nd Lan GbE or 2.5GbE (optional)
Serial Ports
1 x RS-232(DB-9)
2 x RS-232/422/485 (DB-9) (RS-232 with power supply:
ring in/ 5V (standard) & 12V ((with specific optional board)
USB 4 x USB3.2 (Type A)
Audio 1 x Line-out
1 x Mic-in
Power
Adapter 19V/ 4.7A 90W extenal adapter
Power 9-36V DC-in (Optional wide range board)
Watchdog Timer
Watchdog Timer 255 Sec.
OS Support
OS Support Windows 11 64bit, Linux 64bi

11
English
CAUTION: MODEL P15WL01/ P15AL01/ P15EL01 IS DESIGNED TO USE WITH
THE DC INPUT: (19Vdc / 4.74A) ADAPTERS.
CAUTION! Adapter watt should follow default setting or refer to
rating label information.
Mechanism
IP Rating IP65 Front Panel Protection
Mounting VESA Mount (100 x 100mm)
Dimension (WxHxD) 394 x 256 x 48.9
Weight 4.6 Kg
Environment
Operating Temperature 0 ~ 40°C
Storage Temperature -20°C ~ 60°C
Relative Humidity 20% - 80% RH (non-condensing)
EMC CE, FCC, BSMI,
Safety CB, cTUVus,CEC, BSMI
RF EU, US, Taiwan

12
English
2.2 Product overview
Refer to the following illustration to identify the components on this side
of the panel PC. Features and configurations vary by model.
2
1
14
511 8 93 4
713 61210
NOTE: The product’s color, I/O port, indicator location will depend
upon the actually shipped product.

13
English
Potential equalization pin (POAG) (optional)
4
15" FHD LCD display (True-Flat PCAP touch)
2
3
Webcam
1
Optional I/O ports are available depending on the
specs of the actually shipped product.
Optional
I/O Port Occupied Sections Specifications /
Limitations
M.2 SSD 1 M.2 2280 M key slot
D-Sub
(VGA) port 1Max. resolution:
D-Sub (VGA):
1920x1080
DVI-I (Single Link):
1920x1080
DVI-I port 1
USB 2.0
Ports 1
USB 2.0 x 4pcs
COM Port 1 RS232 only
5Headphone / Line-out jack
6Microphone jack

14
English
7LAN (RJ45) port: 1st LAN on MB
9USB 3.2 Type-A ports
10 HDMI port
13 Power jack (DC-IN)
11 Power button
14 Connector for external antenna (optional)
12 COM 1 port (RS232 only)
8LAN (RJ45) port: 2nd LAN via optional daughter board
(support wake on LAN)

15
English
2.3 Product dimensions
48.9
Unit: mm
394.3
197.15
21.4
6
345.23
19
194.54
25.7
256.2
166.7
100
100
188.1
77.07
30

16
English
If you install the M.2 SSD,
please paste a thermal
pad (73*46*5.5 mm) on the
middle frame can effectively
reduce its temperature.
CAUTION: For safety reasons, please ensure that the power cord is
disconnected before opening the case.
Getting Started
 Follow the steps 1 → 4 to remove the cover.
 Follow the steps 4 → 1 to install the cover.
Four screws
Connector cover
(optional)
Cover
Ten screws
Middle Frame
3
4
2
1
Thermal Pad

17
English
3.1 M.2 Device Installation
1. Locate the M.2 2280 M key slot on the motherboard, unfasten the
screw first.
M.2 2280 M key slot
Slope angle
b
a
c
Screws (M3 x 5L)
2. Install the M.2 device into the M.2 slot and secure with the screw.
SO-DIMM slot M.2 2280 M key slot
Cover

18
English
3.2 Memory Module Installation
1. Locate the SO-DIMM and
paste the thermal pad on
the motherboard, which
can effectively reduce its
temperature. (P15AL01 only)
P15WL01 2 x 260 pin SO-DIMM up to 64GB,
Dual Channel 1.2 V DDR4 2400MHz
P15EL01 2 x 260 pin SO-DIMM up to 32GB,
Dual Channel 1.2 V DDR4 3200MHz
P15AL01
2 x 262 pin SO-DIMM up to 64GB,
Dual Channel 1.1 V DDR5 4800MHz
With thermal pad *4
2. Install the 1st memory
module into the
DIMMA1 slot.
3. Align the notch of the
memory module with
the one of the relevant
memory slot.
DIMMA1 (Bottom) DIMMB1 (Top)
Thermal Pad
(P15AL01 only)
Thermal pad
(50x15x2.25 mm)
for double-sided
DRAM
Notch
Cutout
Thermal pad
(50x15x3 mm)
for single-sided
DRAM

19
English
4. Gently insert the module into
the slot in a 45-degree angle.
5. Carefully push down the
memory module until it snaps
into the locking mechanism.
a
b
45-degree
angle
6. Install the 2nd memory module
into the DIMMB1 slot (proceed
with steps B3 to B5).
7. Paste the thermal pad
(50*20*7.5 mm), as shown.
(P15AL01 only)
Thermal Pad *2
(50*20*7.5 mm)
(P15AL01 only)
Latch
DIMMB1
(Top)
c
c
d
Latch
d
Thermal Pad

20
English
3.3 How to replace the M.2 SSD
1. If you want to replace the M.2 SSD, unscrew the thumbscrew and
two screws of the bracket and remove it.
Old SSD
a
b
2. Install the M.2 device into the M.2 slot and secure with the screw.
c
Slope angle
b
a
cc
M.2 2280 M key slot
New SSD