A tour of the Touch padSharing content
Make sure your presentation source is switched on and connected to
the video system before you tap Presentation.
Quick Reference Guide
Cisco TelePresence MX200 G2/MX300 G2/MX700/MX800/SX80
Connect your source and
make sure it is switched on.
Tap Share (a), then scroll
horizontally (b) to locate
the presentation source, if
needed. Once located tap
the required source.
Tap Preview, if you want to
check what you will share
before you share it, and then
tap Share to actually start
sharing the content of your
source.
Your content will now be
viewable by all connected
participants. To stop sharing
content tap Stop Sharing, as
shown.
TC7.3
Tap the three small dots (...),
to acess the menu allowing
you to preview or to share
the content of the selected
source.
Tap the touch screen
to wake up the system,
if needed.
Tap a button
to activate its
function.
Scroll in lists
as on a smart
phone.
Tap Dial to
invoke the
dial pad.
Tap Contacts to
invoke the list of
contacts including
Favorites,
Directory and
History.
Tap Meetings
to invoke a list
of upcoming
scheduled
meetings.
Tap
Messages
to invoke the
voice mail
system, if
applicable.
Tap
Presentation
to start sharing
content and
to conduct
presentations.
Press and hold
the left side of the
Volume button
to decrease the
loudspeaker volume
and the right side to
increase the volume.
Press the
Microphone
button to
mute/unmute
microphone.
Time of day is
indicated in the
upper right corner.
Tap the Camera
icon to activate
self-view and
camera settings.
Tap the ?to
contact or
access the Help
desk, if available.
Tap the upper left corner to
activate/deactivate the Do not
disturb feature, to activate/
deactivate the Standby feature, and
to access the Settings.
D1507704 Quick Reference Guide MX200 G2/MX300 G2/MX700/MX800/SX10/SX20 SX80 TC7.3 Dec. 2014
