Siamp 99T series User manual

INLET VALVES 99T
ASSEMBLY INSTRUCTIONS
99T Low pressure
3/8" Brass
99T Low pressure
1/2" Brass
99T Low pressure
1/2" Plastic
T Low pressure

2. Inlet installation
1. Height seing
A CB
A

INLET VALVES 99T
3. Water level adjustement
B

2 cm min.
Adjust water level with
the grey adjustable screw ;
screw to increase water level,
unscrew to decrease it.

4. Maintenance
Ref. : 50 7189 01A
a cb
a
c
b
34 9513 07
WARNINGS:
• An approved single check valve or some other no less
effective backflow prevention device shall be fitted at
the point of connection(s) between the supply and the fitting.
• Do not over tight in any case.
• Do not use any sealing paste and/or compound in any case
SIAMP UK will be not responsible in case these warnings are
not respected.
Siamp Ltd / Unit C2 / Meadowbank Business Park
Tweedale Way / Hollinwood / Oldham / Greater Manchester / OL9 8EH
Telephone : [phone] / Fax : [phone] / [email protected].uk