Siemens WT46S597GB User manual

1 2 3 4 5 6
ˎ@°CALow Heat Reduced temperature for delicate fabrics ', for a longer drying
time; e.g. acrylic, polyamide, elastane or aceta te silk.
ˎLess Ironing Reduces creasing and prolongs the anti-creasin g phase after the
programme has finished; can be s elected in one of two levels.
Status indicators
Icc+cc\Indicators which show the progra mme sequences.
Drying, Iron Dry, Cupboard Dry, End / Easy Iron.
Service indicators
4clean
.container
uwater tank
Clean the fluff filter and/or air cooler apage 6.
Empty the condensation container.
Fill the water tank with distilled wa ter apage 9.
For selecting the se ttings. ˎMenu
For changing all the setting s in the display panel. ˎC hange
1 -24 hrs End of the programme aft er ... (depending on the prog ramme selected, e.g. 1:54h a2h;
you can always select u p to the next full hour).
Electronic start
timer 0, 1, 2, 3, 4 There are four buzze r volume settings: 0 (off), 1 (quiet), 2 (normal ), 3 (loud), 4 (very loud). Signal 3On-Off Provides protection agains t unintentional changes to the functions set
(press and hold the M enu button for 5 second s).
Appliance lock
(depending on the
model) #0, 1, 2, 3 The drying result (e.g. cupboard d ry) can be increased in three s tages (1 - 3) for the programmes
Cottons/Coloureds,Easy-Care and Rapid 4 0 apresetting = 0.
After one of these programmes has be en finely adjusted, the setting is retained for the others.
Fine adjustment
Drying result 9600-1800 ²The spin speed that was used in the w ashing machine;
for more precise indica tion of the projected dryin g duration only.
Spin speed ... and adapt to individual requir ements
Never operate the dryer if it is damaged.
Inform your after-sales service. Inspecting
the dryer
Sorting and loading laundry
Remove all objects from pockets.
Pay particular attention to cigarette lig hters.
The drum must be empty before filling.
If necessary, fill the water tank for
Steam Refresh/Drying p rogrammes apage 8.
See programme overview on pa ge 7.
See also separate instructions for basket for woollens
(depending on the model)
Your new dryer
Congratulations! - You have chos en a modern, high-quality domestic
appliance from Siemens.
A distinctive feature of the c ondensation dryer is its low e nergy
consumption.
Every dryer which leaves our factory is carefully checked to ensure
that it functions correctly and is in perfect condition.
Should you have any questions, our after-sales service will be pleased
to help.
Environmentally-responsible disposal
Dispose of packaging in an environmentally-responsible manner.
This appliance is designated according to European directive 2002/96/EC which governs waste e lectrical and electronic
equipment (WEEE).
This directive provides the frame work for the EU-wide collection an d
reuse of used appliances.
For further information about our products , accessories, spare parts
and services, please visit: www .siemens-home.com
Intended use
Contents Page
ʋPreparation . . . . . . . . . . . . . . . . . . . . . . 2
ʋSetting the programmes . . . . . . . . . . . . . 2
ʋDrying . . . . . . . . . . . . . . . . . . . . . . . . 3/4
ʋNotes on laundry . . . . . . . . . . . . . . . . . . 5
ʋCleaning and care . . . . . . . . . . . . . . . . . . 6
ʋOverview of programmes . . . . . . . . . . . .7
ʋShort spin / Refresh . . . . . . . . . . . . . . 8/9
ʋInstallation . . . . . . . . . . . . . . . . . . . . . . 10
ʋFrost protection / Transport . . . . . . . . . .10
ʋTechnical data . . . . . . . . . . . . . . . . . . . 11
ʋOptional accessories . . . . . . . . . . . . . . .11
ʋWhat to do if... / After-sales service . . . .12
ʋSafety instructions . . . . . . . . . . . . . . . . 13
Preparing for installation, s ee page 8
Selecting and adjusting the programme
Additional functions
Select the drying progra mme ...
Press the Start/Stop bu tton
Only if your hands are d ry.
Only hold the plug by the plug
casing.
Connecting the
mains plug
Display panelProgramme selector
All buttons are sensitive,
a light touch is enough!
Display for max. load
capacity for selected programme
ʋonly for domestic use.
ʋonly to be used for drying , refreshing or unwrinkling
fabrics that have been wash ed with water.
.
Do not leave children unsupervised near the dryer.
Keep pets away from the d ryer.
3
2
1
Drying / Short spin /
Refresh
Drying Emptying condensation
Empty the container after each drying cycle, not during drying!
1. Remove the container, holding it level.
2. Pour out condensation.
3. Push the .ccontainer back in unt il it clicks into place.
Cleaning the fluff filter
1. Open the door, remove the filte r and fold open.
2. Remove the fluff (by wiping the filter with you r hand).
3. Close the filter, insert it again and close the doo r.
4. Remove fluff from the door and th e area around it.
Very dirty or blocked filters should be rinsed under warm
water, and then dried thoroughly.
Clean the filter in the water tank if it is dirty
1. Remove the condensation tank.
2. Remove the filter.
3. Clean the filter under running water.
4. Re-insert the filter and push in the c ondensation tank until it clicks into
place.
Switching off the dryer
Turn the programme selector to Off.
Do not leave damp laundry in the dryer .
Removing the laundry
The automatic Easy Iron function moves the drum at certain intervals. The load remain s loose and soft for
an hour (or two hours if you manually sele ct the Less Ironing function, depend ing on the model.)
Information on laundry ...
Labelling of fabric s
Follow the manufacturer's care information.
(Drying at normal temperatur e.
'cDry at a low temperature as elect @°CAüLow Heat as well.
)cDo not machine dry.
Do not tumble-dry the foll owing fabrics:
 Airtight fabrics ( e.g. rubber-coated fabrics).
 Delicate materials (silk, curtains mad e from synthetic material) ath ey may crease.
 Oil-stained laundry.
Drying tips
 To ensure a consiste nt result, sort the laundry by fabric type and drying programme.
 Close zips, hooks and e yes, and do up any buttons.
Tie belts, apron strings etc. together.
 Do not overdry easy-c are laundry arisk of creasing
Allow laundry to finish drying in the a ir.
 Do not iron l aundry immediately after drying, fold items up and leave for a while
athe remaining moisture will then be distributed evenly.
 Knitted fabrics (e.g. T-shirts, jerseys) often shrink slightly th e first time they are tumble-dried.
aDo not select the Cupboard Dry Extra programme.
 Starched l aundry is not always suita ble for dryers astarch leaves be hind a coating that
adversely affects the drying op eration.
 When washing laundry that is to be tumble-d ried afterwards, dose the fabric softe ner
according to the manufactu rer's instructions.
 With a small load, use th e Timed Program.
Tips for Short sp in/refreshing
 Use your dryer for u nwrinkling and refreshing fabrics.
 Short spin cycle for reducing creasing.
 Refresh cyc le for eliminating odours from fab rics.
Do not use Short spin/Refresh for the following fabrics:
 Wool, leather, fabrics with m etal, wooden or plastic parts.
 Wax and oil ja ckets.
 Sort the laundry by colour and put on sep arate short spin/refresh cycles to prevent the
colours from bleeding.
 These programmes do not remove stains astains must be tre ated and removed
beforehand.
 For best results, so that the laundry will have as few creases as possible, remove each item
immediately after the programme has fini shed and hang on a hanger to finish drying. Pull
clothes into shape if r equired.
Environmental protecti on/energy-saving tips
 Before drying, spin the laundry thoroughly in the washing machine athe higher the spin
speed, the shorter the drying time will be ( consumes less energy), also spin easy-care
laundry.
 Use the maximum re commended capacity, but do not exceed i t
aPage 7, Programme overview.
 Make sure the room is well ventilated during d rying.
 Clean the fluff filter a fter each drying cycle apage 4.
 Keep the air cooler clea n apage 6 Cleaning and care.
 Keep the sup ply of cool air unobstructed aDo no t cover or block the coolin g grill.
Condensation container
Control panel
Air inlet
Fluff filter
Drum
Cleaning and care
Dryer housing, co ntrol panel, air coo ler, moisture sensors
 Wipe with a soft, dam p cloth.
 Do not use harsh cleaning agents and solvents.
 Remove detergent and c leaning agent residue imme diately.
 During drying, water may collect betwee n the door and seal. This does not affect your
dryer's functions in any way.
Clean the protective fil ter 3 - 4 times a year
or if 4flashes after the fluff filter has been cleaned.
Air cooler / protective filter
When cleaning, only re move the protective f ilter. Clean the air c ooler
behind the protective filter once a yea r.
 Allow the dryer to cool.
 Residual water may leak out, so place a n absorbent towel
underneath the maintenance door.
1. Unlock the maintenanc e door.
2. Open the maintenance door fully.
3. Turn both locking levers towards each anoth er.
4. Pull out the protective fi lter/air cooler.
Do not damage the protective filter or air c ooler.
Clean with warm wat er only. Do not use a ny hard or sharp-ed ged
objects.
5. Clean the air cooler thoroughly.
Allow to drip dry.
6. Clean the seals.
7. Re-insert the protective filter/air cooler,
with the handle facing down.
8. Turn back both locking levers.
9. Close the maintenance door until the lock clicks into place.
Moisture senso rs
The dryer is fitted with stainless steel moisture sensors. The sensors
measure the level o f moisture in the laund ry. After a long period of
operation, a fine layer of limescale m ay form on the sensors.
1. Open the door and clean the moistur e sensors with a damp sponge
which has a rough surface.
Do not use steel wool or abrasive materials.
Cover for steam nozzle in the drum
After lengthy operat ion, limescale and fluff may accumulate on
the cover of the steam nozzle. Clean regularl y:
1. Open the door and remove the cover with a screw driver.
Clean the cover under running water.
2. Push and click the protec tive cap back in place.
Cover for
steam nozzle
Air cooler
Programme end once \lights up in the display.
Interrupt programme removing or adding laundry.
The drying cycle can be interrupte d for a brief period so that laundr y may be added or removed.
The selected programme must then be continued un til it is finished.
Hot steam may escape during the Stea m Drying / Steam Refresh programmes.
1. Open the door. The drying cycle is paused.
2. Remove or add laundry and close the doo r.
3. If required, select a new progra mme and additional functions.
4. Press the Start/Stop button.
Water tank
filling hole
with filter
Only when switched off!
7
Programme overview see also pages 5 and 8
After drying ...
T-shirt
Shirts
Trousers
Skirts/dresses
Sportswear
Work clothing
Anoraks
Terry
Bathrobes
Underwear
Socks
Bed linen
Table linen
Terry towels
Tea towels/
hand towels
c
iron

lightly iron
@c
do not iron
c
mangle
Cottons/Coloureds max. 8 kg For whites and coloureds made of cotton or linen.
Iron Dry ø@ è*è*è*è*è*è*è*è* Cupboard Dry @è*è*è**è*è* Cupboard Dry Plus @*è*è*è**è*è*
Easy-Care max. 3.5 kg For non-iron laundry made of synthetic fibres and mixed fabric, cotton.
Iron Dry øc@ è*è*è*è*è*è*
Cupboard Dry @è*è* Cupboard Dry Plus @è*è*è*
Steam Drying For smoothing hard-wearing and easy-care fabrics. Steam smooths the fabrics. Minimum Iron Daily max. 2.5 kg Further information aPage 8 . Minimum Iron Shirts max. 1.5 kg Steam Refresh For freshening hard-wearing and easy-care fa brics.S team freshens up the fabrics. Professional max. 1.5 kg Furtheri nformation aPage 8. Leisure max. 1.0 kg Outdoor max. 1.5 kg Forf abrics with membrane coating, waterproof fabrics, functional clo thing, fleece (jackets/trousers with removable inner lining are to be
dried separately).
Woollens finish max. 3 kg For woollen fabrics suitable for machine-washing. Fabrics become f luffier but not dry.
Remove fabrics once the programme h as ended and allow to dry.
Lingerie max. 1 kg For lingerie made of s ynthetic fibres, cotton or blended fabric.
Rapid 40 max. 2 kg For laundry that needs to be dried q uickly, e.g. items made of synthetic fibres, cotton or mixed fabrics. The values may differ fro mth ose
given depending on the type of fabric, com position of the laundry to be dried, the residual moisture in th e fabric and size of the load.
Programme time warm max. 3 kg For pre-dried, multi-layered delicate f abrics made of acrylic, or small, individual items of laundry . Also for subsequent drying.
0111 / 9000617118 *617118* Siemens Electrogeräte GmbH
Carl-Wery Str. 34
81739 Munich/Germany
WT46S597GB

8
Steam Drying - Steam Refresh
Steam programmes for un wrinkling or refreshi ng
 Your dryer has un wrinkling and refreshing programmes that can be used for removing
odours and minimising creasing in dry fabrics. Steam smooths and freshens up item s of
clothing.
 Sorting the l aundry according to size, w eight, fabric and colour is n ecessary.
 Only use Sho rt spin/Refresh for fabrics with the s ame properties.
 During steam ge neration (required), additional noises may o ccur.
 The result of refre shing and unwrinkling may vary depending on the type of fab ric, size of
the load and programme sel ected.
 After unwrinkli ng or refreshing, all fabrics must be removed immediately and hung crease-
free on a hanger or a washing line for 15 minutes.
Programmes
Please observe the treatment symbols and manufacturer's instructions on the fabrics.
Do not use Short spin/Refresh for fabrics m ade of wool, leather, containing metal or
wooden parts as well as wax and oi l jackets!
Do not use any dryer cleaning sets!
ʑSteam Drying
Minimum Iron Shirts
Suitable for easy-care fabrics, e.g. formal s hirts. Fabrics are smoothed. You can expec t
optimum results if non-iron appears on the c are label. After the programme has finished,
the items must be removed immediately and hung crease-free on a hange r or washing line
for 15 minutes. The programme is for up to 5 formal shirts.
Minimum Iron Daily
Suitable for hard-wearing cotton fabrics, e.g. bed linen, tab lecloths or formal shirts. Fabrics
are smoothed. You can expect optimum r esults if non-iron appears on the care label. After
the programme has finished, the items m ust be removed immediately and hung crease-free
on a hanger or washing line for 15 minu tes. The programme is for up to 5 form al shirts or
1 to 2 larger items.
ʑSteam Refresh
Professional
Suitable for refreshing suits, jackets and trousers, or dry-clean items th at cannot be washed
in the washing machine asee the c are label. The programme only refreshes fabrics and
does not clean them. After the end of the programme, the items must be removed
immediately. Programme for 1 suit or 1 to 2 smalle r items.
Leisure
Suitable for refreshing casual wear ma de of cotton or artificial fibres. Fabrics mus t be
suitable for dryers asee the care label. The programme refreshes fa brics only, and does
not clean them. After the programme has finished, the fabrics must be removed
immediately. Programme for 1 pullover, 2 pairs of trousers or formal shirts.
9
Steam Drying - Steam Refresh
Your water tank empties auto matically after the programme ha s finished.
Cleaning is therefore not required
Filling the wate r tank:
Fill the dryer's water tank with d istilled water before every Steam Drying - Steam Refres h
cycle.
1. Move the programme selector to
Steam Drying or Steam Re fresh.
The usymbol appears in the display.
2. Remove the con densation tank completel y.
Before every Steam Drying - Steam Refresh cycle, fill t he water tank with
distilled water only. Do not use tap water, condensation or additives.
3. Fill the water tank. Use the jug supplied.
If the water tank filter is dirty ac lean the filter in the water tank.
See page 4.
4. Pour the distilled wat er into the filling hole on t he water tank,
until the usymbol g oes out on the displa y panel.
If drying the recommend ed load, approximately 250 to 300 ml of d istilled
water is used in the Steam Dry ing - Steam Refresh programmes.
5. Insert the condensation contai ner all the way.
6. Start the Steam Dry or Steam Refresh program me.
10
Installation
 Scope of delivery: dryer, installa tion and instruction manual, jug, basket for woolle ns
(depending on the model).
 Check dryer for transport d amage.
 The dryer is heavy. Do not attempt to lift it on your own.
 Be careful to avoid shar p edges.
 Do not install i na room where there is a risk of freezing. Fre ezing water may cause damage.
 If in doubt, have t he appliance connected by a specia list.
 Do not lift the dryer by protruding parts (e.g . the door) - risk of breakage.
Setting up the d ryer
 The appliance plug must always be accessible.
 Ensure that the appliance is installed on a clean, level
and firm surface.
 Keep the cooling grille on the fr ont of the dryer
clear.
 Keep the area around t he dryer clean.
 Level the dryer usin g the threaded feet.
Use a spirit level.
 Do not remove the threaded feet under any
circumstances.
Mains conn ection see safety information apage 13 .
 Connect to an AC earthed socket. If in doubt, have the socket checked by a spe cialist.
 The mains voltage and the voltage shown onthe rating plate (aPage 11) must be the same.
 The connected load a nd necessary fuse protection are specified on the rating plate.
Frost protection / Transport
Preparation
1. Empty the condensation container apage 4.
2. Select any programme using the programme selector.
3. Press the Start/Stop button acondensation is pum ped into the container.
4. Wait 5 min., and then empty th e condensation container again.
5. Turn the programme selector to Off.
The water tank mu st not contain any dis tilled water. If necessary, ru n the Steam/Refresh p rogramme.
1.
Remove all accessories
from the drum.
The drum must be empty.
Make sure that the air inlet
remains unobstructed
Clean and level
Do not install the dryer behi nd a door or sliding
door, which could prevent or restrict o pening of the
dryer door. This will prevent c hildren from locking
themselves in and putting their lives in danger.
2.
Do not operate the dryer if there
is a danger of frost.
11
Technical data
ʠDimensions (DxWxH) 60 x 60 x 85 cm (adjustable height)
Weight approximately 43.5 kg
Max. capacity 8 kg
Condensation container 4.0 l
Water tank approx. 0.4 l
Connection voltage 220-240 V
Connected load max. 2800 W
Fuse protection 13 A
Ambient temperature 5 - 35 °C
Product number
Production number Inside of door
The rating plate can be found on the back of the dryer.
ʠConsumption ra tes These are guide values determined under standard
conditions.
Spin speed in rpm
(residual moisture)
Drying time
in min.**
Energy
consumption
in kWh**
Cottons/Coloureds 8 kg
Cupboard Dry* 1400 (approx. 50 %) 105 3.74
1000 (approx. 60 %) 122 4.49
800 (approx. 70 %) 139 5.17
Iron Dry* 140 0 (approx. 50 %) 83 2.24
1000 (approx. 60 %) 100 3.44
800 (approx. 70 %) 117 3.86
Easy-Care 3.5 kg 1000 39 1.05
Cupboard Dry* 800 (approx. 40 %) 42 1.35
600 (approx. 50 %) 51 1.65
*Test programme to DIN EN 61 121
**The values may differ from those given, depending on overvoltage and undervoltage, the
type of fabric, composition of the laundry to be dried, the residual moisture in the fabric and
the size of the load.
ʠDrum interior ligh t (bulb E14, 25 W)
The drum is illuminated after the doo r is opened or closed, and after the programme has
started. The light goes out automatical ly. To change the bulb apage 12.
Optional accessories (order from the after-sales service using the order number)
Connection fittings fo r condensation outlet
The condensation is conveyed directly via a hose.
Washer-dryer stack connec tion set
The dryer can be placed on top of a suita ble washing machine with the same width and depth
to save space.
This connection set must always b e used to secure the dryer to the washin g machine.
Same as WZ 20310, but with pull-out worktop.
Installation undernea th the worktop
Risk of electric shock!
Instead of the appliance cove ring plate, you must have a metal cove r fitted by an expert.
WZ
20160
WZ
20310
WZ
20300
WZ
20290
12
What to do if...
If you cannot r ectify a fault yourself, please co ntact our after-sales service. We w ill always find
an appropriate so lution and will avoid unne cessary visits by engineer s. Trust the expertise of
the manufacturer and rest assur ed that the repair will be carried out by trained service
technicians using or iginal spare parts. The contact details of your l ocal after-sales service can
be found in the enclosed after-sales service dire ctory, or by calling o ne of these numbers :
GB 0844 8928999 (Calls fro m a BT landline w ill be charged at up to 3 pe nce per minute .
A call set-up fee of up to 6 pence m ay apply.)
IE 01450 2655
When contacting the aft er-sales service, please quote the appliance's product number (E no .)
and production num ber (FD) (see the inside of the door).
Set the pro gramme selector to Off and remove the appliance p lug from the socket.
ʠThe Start/Stop indicator light
does not come on.
Mains plug plugged in?
Programme selected?
ʠThe āsymbol and Start/Stop
indicator light are flashing.
Empty the condensation co ntainer apage 4.
Check the condensation outlet ho se, if applicable (kink).
ʠThe 4symbol and Start/Stop
indicator light are flashing.
Clean the air cooler apage 6 Cleaning and care.
Clean the fluff filter apage 4.
ʠThe usymbol flashes. Is the water tank empty?
Filling with distilled water apage 9.
The filter in the water tank may have b ecome dirty.
If so, clean the filter in the wate r tank apage 4.
ʠThe Steam Drying - Steam
Refresh does not start.
ʠDryer does not start. Has the Start/Stop button been pres sed? Is the door
closed?
Programme set?
Ambient temperature greater tha n 5 °C?
ʠWater is leaking out. Make sure the dryer is level.
Clean the air cooler seal.
ʠThe door opens by itself. Push the door clo sed until you hear it click into place.
ʠItems crease even though th e
Steam Drying - Steam Refre sh
programme has been selected .
Laundry load exceeded?
Remove articles of cl othing immediately after the end of the
programme, hang up and p ull into shape.
ʠDrying result was not achieved
(laundry too damp).
Hot laundry feels damper than it actually is.
The selected programme does no t suit the load. Use
another drying programme or, i n addition, select the time
programme apage7.
Use fine adjustment for the drying result apage1/2 .
Fine layer of limescale on the humidity sensors aClean
the humidity sensors apage 9.
Programme cancellation, e.g . tank full, mains power supply
failure, door open or maximum dryin g time reached.
ʠDrying time too long. Clean the fluff filter under running
water apage 4.
Insufficient supply of air aensure that air c an circulate.
Air inlet possibly blocked aClear inlet apage 8.
Ambient temperature highe r than 35 °C aVentilate the
room.
ʠThe humidity in the room
increases significantly.
Make sure the room is suffic iently ventilated.
ʠOne or more programme s tatus
indicator lamps are flashing.
Clean the filter and air cooler apage 4/ 6.
Check the installation con ditions apage 10.
Switch off, allow to cool, switch on again and restart the
programme.
ʠThe interior light (dependin g on
the model) does not work.
Unplug the appliance plug, fold back the cover cap on the
inside above the door (using a Torx 20 screw driver)
and replace the bulb. Close the cov er cap.
13
Safety instructions
Emergency  Pull the appliance plug out of the socket immediately or disconnec t the fuse.
ONLY use the
dryer...
 In rooms inside the house.
 For drying or unwrinkling/re freshing fabrics.
The dryer must
NEVER...
 Be used for purpos es other than those described a bove.
 Be modified in term s of its technology or properties.
Hazards  The dryer must not be used by children or persons who have not been
instructed in its use.
 Do not leave children unsupervised near the dryer.
 Keep pets away fro m the dryer.
 Remove all objects from po ckets,
and lighters in particular arisk of ex plosion.
 Do not l ean or sit on the door arisk of tipping.
 Open the door carefully. Hot steam may escape. T he clothes and drum may
be hot arisk of burns.
Installation  Secure loose leads or hoses, oth erwise there is a risk of tripping.
 Below 0 °C there is a possibility o f frost damage.
Mains
connection
 Connect the dryer according to specifications to an AC earthed socket,
otherwise it cannot be guaranteed that the appl iance is completely safe.
 The cable cross-section must be sufficient.
 Only use earth-leakage circuit breakers with the following symbol:
 The appliance plug and so cket must be compatible.
 Do not us e multiple plugs/connectors a nd/or extension cables.
 Do not to uch or hold the ap pliance plug with wet hands
arisk of electric shock.
 Never pull the appliance plu g out of the socket by its cable.
 Do not da mage the mains lea d arisk of electric shock.
Operation  Only laundry must be loaded into the drum.
Before switching on the drye r - check the contents.
 Do not use th e dryer if the laundry has been in contact with solvents, oil, wa x,
grease or paint (e.g. hair setting spray , nail polish remover, stain remover,
cleaning solvent, etc.) afire/explosion ha zard.
 Hazard caused by d ust (e.g. coal dust, flour): do n ot use the dryer
arisk of explosion.
 Do not put lau ndry containing foamed material/rubber in the dryer aela stic
material may be destroyed and the d ryer may be damaged due to possible
deformation of the foamed material.
 Switch off the dryer once the programme has ended.
 For unwrinkling/refreshing fabrics, use distilled water only. Do not use
condensation, tap water or ad ditives.
 Distilled/condensation wate r is not for drinking.
Defect  Do not use the dryer if it is defective or if you suspect that it is.
Repairs must only be carried out b y the after-sales service.
 Do not use a dryer with a faulty mains lead. To p revent risks, a faulty mains
lead must only be replaced by the after-sales service.
 Before changing the bulb of the interior light make absolutely sure you have
pulled the appliance plug from the s ocket arisk of electric shock.
Spare parts  Only use genuine spare parts and accessories for safety reasons.
Disposal  Dryer: unplug th e appliance plug, then cut the mains lead from the appliance.
Dispose of the dryer at an approved pu blic disposal facility.
 Packaging: keep all packaging out of re ach of babies and chil dren.
adanger of suffocation.
 All materials are e nvironmentally safe and recyclable . Dispose of in an
environmentally-responsible manner.
Operating
and installation instructions
en
Observe the safety
instructions on
page 13.
Read these instructions before s witching
on the dryer.
Caution - risk of sc alding.
Tumble dryer

1 2
ˎ@°CALow Heat
Reduced temperature for delicate fabrics 'time; e.g. acrylic, polyamide, elastane or a
ˎLess Ironing Reduces creasing and prolongs the anti-cre
programme has finished; can be selected
Status indicators
Icc+cc\Indicators which show the programme seq
Drying, Iron Dry, Cupboard Dry, End / Eas
Service indicators
4clean
.container
uwater tank
Clean the fluff filter and/or air cooler apa
Empty the condensation container.
Fill the water tank with distilled water ap
For selecting the settings. ˎMenu
For changing all the settings in the display panel. ˎChange
1 -24 hrs End of the programme after ... (depending on the programme selected, e.g. 1:54h a2h;
you can always select up to the next full hour).
Electronic start
timer 0, 1, 2, 3, 4 There are four buzzer volume settings: 0 (off), 1 (quiet), 2 (normal), 3 (loud), 4 (very loud). Signal 3On-Off Provides protection against unintentional changes to the functions set
(press and hold the Menu button for 5 seconds).
Appliance lock
(depending on the
model) #0, 1, 2, 3 The drying result (e.g. cupboard dry) can be increased in three stages (1 - 3) for the programmes
Cottons/Coloureds,Easy-Care and Rapid 40 apresetting = 0.
After one of these programmes has been finely adjusted, the setting is retained for the others.
Fine adjustment
Drying result 9600-1800 ²The spin speed that was used in the washing machine;
for more precise indication of the projected drying duration only.
Spin speed ... and adapt to individu
Never operate the dryer if it is damaged.
Inform your after-sales service.
Sorting and load
Remove all objects from pockets.
Pay particular attention to cigarette lighters.
The drum must be empty before filling.
If necessary, fill the water tank for
Steam Refresh/Drying programmes apage 8.
See programme overview on page 7.
See also separate instructions for basket for wo
(depending on the model)
Your new dryer
Congratulations! - You have chosen a modern, high-quality domestic
appliance from Siemens.
A distinctive feature of the condensation dryer is its low energy
consumption.
Every dryer which leaves our factory is carefully checked to ensure
that it functions correctly and is in perfect condition.
Should you have any questions, our after-sales service will be pleased
to help.
Environmentally-responsible disposal
Dispose of packaging in an environmentally-responsible manner.
This appliance is designated according to European directive 2002/96/EC which governs waste electrical and electronic
equipment (WEEE).
This directive provides the framework for the EU-wide collection and
reuse of used appliances.
For further information about our products, accessories, spare parts
and services, please visit: www.siemens-home.com
Intended use
Contents Page
ʋPreparation . . . . . . . . . . . . . . . . . . . . . . 2
ʋSetting the programmes . . . . . . . . . . . . . 2
ʋDrying . . . . . . . . . . . . . . . . . . . . . . . . 3/4
ʋNotes on laundry . . . . . . . . . . . . . . . . . . 5
ʋCleaning and care . . . . . . . . . . . . . . . . . . 6
ʋOverview of programmes . . . . . . . . . . . . 7
ʋShort spin / Refresh . . . . . . . . . . . . . . 8/9
ʋInstallation . . . . . . . . . . . . . . . . . . . . . . 10
ʋFrost protection / Transport. . . . . . . . . . 10
ʋTechnical data . . . . . . . . . . . . . . . . . . . 11
ʋOptional accessories . . . . . . . . . . . . . . . 11
ʋWhat to do if... / After-sales service . . . . 12
ʋSafety instructions . . . . . . . . . . . . . . . . 13
Preparing for installation, see page 8
Selecting and adjusting the
Additional functions
Select the dry
Press the
Only if your hands are dry.
Only hold the plug by the plug
casing.
Conne
m
Display panelProgramme selector
All buttons a
a light touch
Display for max. load
capacity for selected programme
ʋonly for domestic use.
ʋonly to be used for drying, refreshing or unwrinkling
fabrics that have been washed with water.
.
Do not leave children unsupervised near the dryer.
Keep pets away from the dryer. .c('ca@Aü)caaaaaaaaaaa4\
c@c c
ø@ è*è*è*è*è*è*è*è*@è*è*è**è*è*@*è*è*è**è*è*øc@ è*è*è*è*è*è*@è*è*@è*è*è*aa

3 4
ˎ@Arics ', for a longer drying
or acetate silk.
ˎnti-creasing phase after the
cted in one of two levels.
Icc+cc\e sequences.
/ Easy Iron.
4.uapage 6.
apage 9.
ˎˎa3#a9²individual requirements
Inspecting
the dryer
and loading laundry
age 8.
for woollens
ʋʋʋʋʋʋʋʋʋʋʋʋʋing the programme
the drying programme ...
ess the Start/Stop button
Connecting the
mains plug
ons are sensitive,
touch is enough!
ʋʋ
3
2
1
Drying / Short spin /
Refresh
Drying Emptying condensation
Empty the container after each drying cycle, not during drying!
1. Remove the container, holding it level.
2. Pour out condensation.
3. Push the .ccontainer back in until it clicks into place.
Cleaning the fluff filter
1. Open the door, remove the filter and fold open.
2. Remove the fluff (by wiping the filter with your hand).
3. Close the filter, insert it again and close the door.
4. Remove fluff from the door and the area around it.
Very dirty or blocked filters should be rinsed under warm
water, and then dried thoroughly.
Clean the filter in the water tank if it is dirty
1. Remove the condensation tank.
2. Remove the filter.
3. Clean the filter under running water.
4. Re-insert the filter and push in the condensation tank until it clicks into
place.
Switching off the dryer
Turn the programme selector to Off.
Do not leave damp laundry in the dryer.
Removing the laundry
The automatic Easy Iron function moves the drum at certain intervals. The load remains loose and soft for
an hour (or two hours if you manually select the Less Ironing function, depending on the model.) ('ca@Aü)caaaaaaaaaaa
Condensation container
Control panel
Air inlet
Fluff filter
Drum 4
Cover for
steam nozzle
Air cooler
Programme end once \lights up in the display.
Interrupt programme removing or adding laundry.
The drying cycle can be interrupted for a brief period so that laundry may be added or removed.
The selected programme must then be continued until it is finished.
Hot steam may escape during the Steam Drying / Steam Refresh programmes.
1. Open the door. The drying cycle is paused.
2. Remove or add laundry and close the door.
3. If required, select a new programme and additional functions.
4. Press the Start/Stop button.
Water tank
filling hole
with filter
c@c c
ø@ è*è*è*è*è*è*è*è*@è*è*è**è*è*@*è*è*è**è*è*øc@ è*è*è*è*è*è*@è*è*@è*è*è*aa

56
ˎ@A'ˎIcc+cc\4.uaaˎˎa3#a9²aʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋ.cInformation on laundry ...
Labelling of fabrics
Follow the manufacturer's care information.
(Drying at normal temperature.
'cDry at a low temperature aselect @°CAüLow Heat as well.
)cDo not machine dry.
Do not tumble-dry the following fabrics:
 Airtight fabrics (e.g. rubber-coated fabrics).
 Delicate materials (silk, curtains made from synthetic material) athey may crease.
 Oil-stained laundry.
Drying tips
 To ensure a consistent result, sort the laundry by fabric type and drying programme.
 Close zips, hooks and eyes, and do up any buttons.
Tie belts, apron strings etc. together.
 Do not overdry easy-care laundry arisk of creasing
Allow laundry to finish drying in the air.
 Do not iron laundry immediately after drying, fold items up and leave for a while
athe remaining moisture will then be distributed evenly.
 Knitted fabrics (e.g. T-shirts, jerseys) often shrink slightly the first time they are tumble-dried.
aDo not select the Cupboard Dry Extra programme.
 Starched laundry is not always suitable for dryers astarch leaves behind a coating that
adversely affects the drying operation.
 When washing laundry that is to be tumble-dried afterwards, dose the fabric softener
according to the manufacturer's instructions.
 With a small load, use the Timed Program.
Tips for Short spin/refreshing
 Use your dryer for unwrinkling and refreshing fabrics.
 Short spin cycle for reducing creasing.
 Refresh cycle for eliminating odours from fabrics.
Do not use Short spin/Refresh for the following fabrics:
 Wool, leather, fabrics with metal, wooden or plastic parts.
 Wax and oil jackets.
 Sort the laundry by colour and put on separate short spin/refresh cycles to prevent the
colours from bleeding.
 These programmes do not remove stains astains must be treated and removed
beforehand.
 For best results, so that the laundry will have as few creases as possible, remove each item
immediately after the programme has finished and hang on a hanger to finish drying. Pull
clothes into shape if required.
Environmental protection/energy-saving tips
 Before drying, spin the laundry thoroughly in the washing machine athe higher the spin
speed, the shorter the drying time will be (consumes less energy), also spin easy-care
laundry.
 Use the maximum recommended capacity, but do not exceed it
aPage 7, Programme overview.
 Make sure the room is well ventilated during drying.
 Clean the fluff filter after each drying cycle apage 4.
 Keep the air cooler clean apage 6 Cleaning and care.
 Keep the supply of cool air unobstructed aDo not cover or block the cooling grill.
Cleaning and care
Dryer housing, control panel, air cooler, moisture sensors
 Wipe with a soft, damp cloth.
 Do not use harsh cleaning agents and solvents.
 Remove detergent and cleaning agent residue immediately.
 During drying, water may collect between the door and seal. This does not affect your
dryer's functions in any way.
Clean the protective filter 3 - 4 times a year
or if 4flashes after the fluff filter has been cleaned.
Air cooler / protective filter
When cleaning, only remove the protective filter. Clean the air cooler
behind the protective filter once a year.
 Allow the dryer to cool.
 Residual water may leak out, so place an absorbent towel
underneath the maintenance door.
1. Unlock the maintenance door.
2. Open the maintenance door fully.
3. Turn both locking levers towards each another.
4. Pull out the protective filter/air cooler.
Do not damage the protective filter or air cooler.
Clean with warm water only. Do not use any hard or sharp-edged
objects.
5. Clean the air cooler thoroughly.
Allow to drip dry.
6. Clean the seals.
7. Re-insert the protective filter/air cooler,
with the handle facing down.
8. Turn back both locking levers.
9. Close the maintenance door until the lock clicks into place.
Moisture sensors
The dryer is fitted with stainless steel moisture sensors. The sensors
measure the level of moisture in the laundry. After a long period of
operation, a fine layer of limescale may form on the sensors.
1. Open the door and clean the moisture sensors with a damp sponge
which has a rough surface.
Do not use steel wool or abrasive materials.
Cover for steam nozzle in the drum
After lengthy operation, limescale and fluff may accumulate on
the cover of the steam nozzle. Clean regularly:
1. Open the door and remove the cover with a screw driver.
Clean the cover under running water.
2. Push and click the protective cap back in place.
\Only when switched off!
c@c c
ø@ è*è*è*è*è*è*è*è*@è*è*è**è*è*@*è*è*è**è*è*øc@ è*è*è*è*è*è*@è*è*@è*è*è*aa

ˎ@A'ˎIcc+cc\4.uaaˎˎa3#a9²aʋʋʋʋʋʋʋʋʋʋʋʋʋʋʋ.c('ca@Aü)caaaaaaaaaaa4\
7
Programme overview see also pages 5 and 8
After drying ...
T-shirt
Shirts
Trousers
Skirts/dresses
Sportswear
Work clothing
Anoraks
Terry
Bathrobes
Underwear
Socks
Bed linen
Table linen
Terry towels
Tea towels/
hand towels
c
iron

lightly iron
@c
do not iron
c
mangle
Cottons/Coloureds max. 8 kg For whites and coloureds made of cotton or linen.
Iron Dry ø@ è*è*è*è*è*è*è*è* Cupboard Dry @è*è*è**è*è* Cupboard Dry Plus @*è*è*è**è*è*
Easy-Care max. 3.5 kg For non-iron laundry made of synthetic fibres and mixed fabric, cotton.
Iron Dry øc@ è*è*è*è*è*è* Cupboard Dry @è*è* Cupboard Dry Plus @è*è*è*
Steam Drying For smoothing hard-wearing and easy-care fabrics. Steam smooths the fabrics. Minimum Iron Daily max. 2.5 kg Further information aPage 8. Minimum Iron Shirts max. 1.5 kg Steam Refresh For freshening hard-wearing and easy-care fabrics. Steam freshens up the fabrics. Professional max. 1.5 kg Further information aPage 8. Leisure max. 1.0 kg Outdoor max. 1.5 kg For fabrics with membrane coating, waterproof fabrics, functional clothing, fleece (jackets/trousers with removable inner lining are to be
dried separately).
Woollens finish max. 3 kg For woollen fabrics suitable for machine-washing. Fabrics become fluffier but not dry.
Remove fabrics once the programme has ended and allow to dry.
Lingerie max. 1 kg For lingerie made of synthetic fibres, cotton or blended fabric.
Rapid 40 max. 2 kg For laundry that needs to be dried quickly, e.g. items made of synthetic fibres, cotton or mixed fabrics. The values may differ from those
given depending on the type of fabric, composition of the laundry to be dried, the residual moisture in the fabric and size of the load.
Programme time warm max. 3 kg For pre-dried, multi-layered delicate fabrics made of acrylic, or small, individual items of laundry. Also for subsequent drying.
0111 / 9000617118 *617118* Siemens Electrogeräte GmbH
Carl-Wery Str. 34
81739 Munich/Germany
WT46S597GB

8
Steam Drying - Steam Refresh
Steam programmes for unwrinkling or refreshing
 Your dryer has unwrinkling and refreshing programmes that can be used for removing
odours and minimising creasing in dry fabrics. Steam smooths and freshens up items of
clothing.
 Sorting the laundry according to size, weight, fabric and colour is necessary.
 Only use Short spin/Refresh for fabrics with the same properties.
 During steam generation (required), additional noises may occur.
 The result of refreshing and unwrinkling may vary depending on the type of fabric, size of
the load and programme selected.
 After unwrinkling or refreshing, all fabrics must be removed immediately and hung crease-
free on a hanger or a washing line for 15 minutes.
Programmes
Please observe the treatment symbols and manufacturer's instructions on the fabrics.
Do not use Short spin/Refresh for fabrics made of wool, leather, containing metal or
wooden parts as well as wax and oil jackets!
Do not use any dryer cleaning sets!
ʑSteam Drying
Minimum Iron Shirts
Suitable for easy-care fabrics, e.g. formal shirts. Fabrics are smoothed. You can expect
optimum results if non-iron appears on the care label. After the programme has finished,
the items must be removed immediately and hung crease-free on a hanger or washing line
for 15 minutes. The programme is for up to 5 formal shirts.
Minimum Iron Daily
Suitable for hard-wearing cotton fabrics, e.g. bed linen, tablecloths or formal shirts. Fabrics
are smoothed. You can expect optimum results if non-iron appears on the care label. After
the programme has finished, the items must be removed immediately and hung crease-free
on a hanger or washing line for 15 minutes. The programme is for up to 5 formal shirts or
1 to 2 larger items.
ʑSteam Refresh
Professional
Suitable for refreshing suits, jackets and trousers, or dry-clean items that cannot be washed
in the washing machine asee the care label. The programme only refreshes fabrics and
does not clean them. After the end of the programme, the items must be removed
immediately. Programme for 1 suit or 1 to 2 smaller items.
Leisure
Suitable for refreshing casual wear made of cotton or artificial fibres. Fabrics must be
suitable for dryers asee the care label. The programme refreshes fabrics only, and does
not clean them. After the programme has finished, the fabrics must be removed
immediately. Programme for 1 pullover, 2 pairs of trousers or formal shirts.
9
Steam Drying - Steam Refresh
Your water tank empties automatically after the programme has finished.
Cleaning is therefore not required
Filling the water tank:
Fill the dryer's water tank with distilled water before every Steam Drying - Steam Refresh
cycle.
1. Move the programme selector to
Steam Drying or Steam Refresh.
The usymbol appears in the display.
2. Remove the condensation tank completely.
Before every Steam Drying - Steam Refresh cycle, fill the water tank with
distilled water only. Do not use tap water, condensation or additives.
3. Fill the water tank. Use the jug supplied.
If the water tank filter is dirty aclean the filter in the water tank.
See page 4.
4. Pour the distilled water into the filling hole on the water tank,
until the usymbol goes out on the display panel.
If drying the recommended load, approximately 250 to 300 ml of distilled
water is used in the Steam Drying - Steam Refresh programmes.
5. Insert the condensation container all the way.
6. Start the Steam Dry or Steam Refresh programme.
aaaa
ʠʠʠaʠʠāaʠ4aaʠuaaʠʠʠʠʠʠaaaaʠaaaaaʠʠaaʠaaaaaaaaaa

ʑʑaauau
10
Installation
 Scope of delivery: dryer, installation and instruction manual, jug, basket for woollens
(depending on the model).
 Check dryer for transport damage.
 The dryer is heavy. Do not attempt to lift it on your own.
 Be careful to avoid sharp edges.
 Do not install in a room where there is a risk of freezing. Freezing water may cause damage.
 If in doubt, have the appliance connected by a specialist.
 Do not lift the dryer by protruding parts (e.g. the door) - risk of breakage.
Setting up the dryer
 The appliance plug must always be accessible.
 Ensure that the appliance is installed on a clean, level
and firm surface.
 Keep the cooling grille on the front of the dryer
clear.
 Keep the area around the dryer clean.
 Level the dryer using the threaded feet.
Use a spirit level.
 Do not remove the threaded feet under any
circumstances.
Mains connection see safety information apage 13.
 Connect to an AC earthed socket. If in doubt, have the socket checked by a specialist.
 The mains voltage and the voltage shown on the rating plate (aPage 11) must be the same.
 The connected load and necessary fuse protection are specified on the rating plate.
Frost protection / Transport
Preparation
1. Empty the condensation container apage 4.
2. Select any programme using the programme selector.
3. Press the Start/Stop button acondensation is pumped into the container.
4. Wait 5 min., and then empty the condensation container again.
5. Turn the programme selector to Off.
The water tank must not contain any distilled water. If necessary, run the Steam/Refresh programme.
1.
Remove all accessories
from the drum.
The drum must be empty.
Make sure that the air inlet
remains unobstructed
Clean and level
Do not install the dryer behind a door or sliding
door, which could prevent or restrict opening of the
dryer door. This will prevent children from locking
themselves in and putting their lives in danger.
2.
Do not operate the dryer if there
is a danger of frost.
11
Technical data
ʠDimensions (DxWxH) 60 x 60 x 85 cm (adjustable height)
Weight approximately 43.5 kg
Max. capacity 8 kg
Condensation container 4.0 l
Water tank approx. 0.4 l
Connection voltage 220-240 V
Connected load max. 2800 W
Fuse protection 13 A
Ambient temperature 5 - 35 °C
Product number
Production number Inside of door
The rating plate can be found on the back of the dryer.
ʠConsumption rates These are guide values determined under standard
conditions.
Spin speed in rpm
(residual moisture)
Drying time
in min.**
Energy
consumption
in kWh**
Cottons/Coloureds 8 kg
Cupboard Dry* 1400 (approx. 50 %) 105 3.74
1000 (approx. 60 %) 122 4.49
800 (approx. 70 %) 139 5.17
Iron Dry* 1400 (approx. 50 %) 83 2.24
1000 (approx. 60 %) 100 3.44
800 (approx. 70 %) 117 3.86
Easy-Care 3.5 kg 1000 39 1.05
Cupboard Dry* 800 (approx. 40 %) 42 1.35
600 (approx. 50 %) 51 1.65
*Test programme to DIN EN 61121
**The values may differ from those given, depending on overvoltage and undervoltage, the
type of fabric, composition of the laundry to be dried, the residual moisture in the fabric and
the size of the load.
ʠDrum interior light (bulb E14, 25 W)
The drum is illuminated after the door is opened or closed, and after the programme has
started. The light goes out automatically. To change the bulb apage 12.
Optional accessories (order from the after-sales service using the order number)
Connection fittings for condensation outlet
The condensation is conveyed directly via a hose.
Washer-dryer stack connection set
The dryer can be placed on top of a suitable washing machine with the same width and depth
to save space.
This connection set must always be used to secure the dryer to the washing machine.
Same as WZ 20310, but with pull-out worktop.
Installation underneath the worktop
Risk of electric shock!
Instead of the appliance covering plate, you must have a metal cover fitted by an expert.
WZ
20160
WZ
20310
WZ
20300
WZ
20290
ʠʠāaʠ4aaʠuaaʠʠʠʠʠʠaaaaʠaaaaaʠʠaaʠ
aaaaaaaaaa

ʑʑaauauaaaaʠʠʠa
12
What to do if...
If you cannot rectify a fault yourself, please contact our after-sales service. We will always find
an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of
the manufacturer and rest assured that the repair will be carried out by trained service
technicians using original spare parts. The contact details of your local after-sales service can
be found in the enclosed after-sales service directory, or by calling one of these numbers:
GB 0844 8928999 (Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.)
IE 01450 2655
When contacting the after-sales service, please quote the appliance's product number (E no.)
and production number (FD) (see the inside of the door).
Set the programme selector to Off and remove the appliance plug from the socket.
ʠThe Start/Stop indicator light
does not come on.
Mains plug plugged in?
Programme selected?
ʠThe āsymbol and Start/Stop
indicator light are flashing.
Empty the condensation container apage 4.
Check the condensation outlet hose, if applicable (kink).
ʠThe 4symbol and Start/Stop
indicator light are flashing.
Clean the air cooler apage 6 Cleaning and care.
Clean the fluff filter apage 4.
ʠThe usymbol flashes. Is the water tank empty?
Filling with distilled water apage 9.
The filter in the water tank may have become dirty.
If so, clean the filter in the water tank apage 4.
ʠThe Steam Drying - Steam
Refresh does not start.
ʠDryer does not start. Has the Start/Stop button been pressed? Is the door
closed?
Programme set?
Ambient temperature greater than 5 °C?
ʠWater is leaking out. Make sure the dryer is level.
Clean the air cooler seal.
ʠThe door opens by itself. Push the door closed until you hear it click into place.
ʠItems crease even though the
Steam Drying - Steam Refresh
programme has been selected.
Laundry load exceeded?
Remove articles of clothing immediately after the end of the
programme, hang up and pull into shape.
ʠDrying result was not achieved
(laundry too damp).
Hot laundry feels damper than it actually is.
The selected programme does not suit the load. Use
another drying programme or, in addition, select the time
programme apage7.
Use fine adjustment for the drying result apage1/2.
Fine layer of limescale on the humidity sensors aClean
the humidity sensors apage 9.
Programme cancellation, e.g. tank full, mains power supply
failure, door open or maximum drying time reached.
ʠDrying time too long. Clean the fluff filter under running
water apage 4.
Insufficient supply of air aensure that air can circulate.
Air inlet possibly blocked aClear inlet apage 8.
Ambient temperature higher than 35 °C aVentilate the
room.
ʠThe humidity in the room
increases significantly.
Make sure the room is sufficiently ventilated.
ʠOne or more programme status
indicator lamps are flashing.
Clean the filter and air cooler apage 4/6.
Check the installation conditions apage 10.
Switch off, allow to cool, switch on again and restart the
programme.
ʠThe interior light (depending on
the model) does not work.
Unplug the appliance plug, fold back the cover cap on the
inside above the door (using a Torx 20 screwdriver)
and replace the bulb. Close the cover cap.
13
Safety instructions
Emergency  Pull the appliance plug out of the socket immediately or disconnect the fuse.
ONLY use the
dryer...
 In rooms inside the house.
 For drying or unwrinkling/refreshing fabrics.
The dryer must
NEVER...
 Be used for purposes other than those described above.
 Be modified in terms of its technology or properties.
Hazards  The dryer must not be used by children or persons who have not been
instructed in its use.
 Do not leave children unsupervised near the dryer.
 Keep pets away from the dryer.
 Remove all objects from pockets,
and lighters in particular arisk of explosion.
 Do not lean or sit on the door arisk of tipping.
 Open the door carefully. Hot steam may escape. The clothes and drum may
be hot arisk of burns.
Installation  Secure loose leads or hoses, otherwise there is a risk of tripping.
 Below 0 °C there is a possibility of frost damage.
Mains
connection
 Connect the dryer according to specifications to an AC earthed socket,
otherwise it cannot be guaranteed that the appliance is completely safe.
 The cable cross-section must be sufficient.
 Only use earth-leakage circuit breakers with the following symbol:
 The appliance plug and socket must be compatible.
 Do not use multiple plugs/connectors and/or extension cables.
 Do not touch or hold the appliance plug with wet hands
arisk of electric shock.
 Never pull the appliance plug out of the socket by its cable.
 Do not damage the mains lead arisk of electric shock.
Operation  Only laundry must be loaded into the drum.
Before switching on the dryer - check the contents.
 Do not use the dryer if the laundry has been in contact with solvents, oil, wax,
grease or paint (e.g. hair setting spray, nail polish remover, stain remover,
cleaning solvent, etc.) afire/explosion hazard.
 Hazard caused by dust (e.g. coal dust, flour): do not use the dryer
arisk of explosion.
 Do not put laundry containing foamed material/rubber in the dryer aelastic
material may be destroyed and the dryer may be damaged due to possible
deformation of the foamed material.
 Switch off the dryer once the programme has ended.
 For unwrinkling/refreshing fabrics, use distilled water only. Do not use
condensation, tap water or additives.
 Distilled/condensation water is not for drinking.
Defect  Do not use the dryer if it is defective or if you suspect that it is.
Repairs must only be carried out by the after-sales service.
 Do not use a dryer with a faulty mains lead. To prevent risks, a faulty mains
lead must only be replaced by the after-sales service.
 Before changing the bulb of the interior light make absolutely sure you have
pulled the appliance plug from the socket arisk of electric shock.
Spare parts  Only use genuine spare parts and accessories for safety reasons.
Disposal  Dryer: unplug the appliance plug, then cut the mains lead from the appliance.
Dispose of the dryer at an approved public disposal facility.
 Packaging: keep all packaging out of reach of babies and children.
adanger of suffocation.
 All materials are environmentally safe and recyclable. Dispose of in an
environmentally-responsible manner.

ʑʑaauauaaaaʠʠʠaʠʠāaʠ4aaʠuaaʠʠʠʠʠʠaaaaʠaaaaaʠʠaaʠaaaaaaaaaa
Operating
and installation instructions
en
Observe the safety
instructions on
page 13.
Read these instructions before switching
on the dryer.
Caution - risk of scalding.
Tumble dryer