Siemens Simatic S7-1500 User manual

Analog Output Module AQ 4xU/I HF
(6ES7532-5ND00-0AB0)
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SIMATIC
S7-1500/ET 200MP
Analog Output Module AQ 4xU/I HF
(6ES7532-5ND00-0AB0)
Manual
03/2016
A5E36633205
-AA
Preface
Documentation guide
1
Product overview
2
Wiring
3
Parameters/address space
4
Interrupts/diagnostics alarms
5
Technical specifications
6
Dimensional drawing
A
Parameter data records
B
Representation of analog
values
C
Open Source Software
D

Siemens AG
Division Digital Factory
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E36633205-AA
Ⓟ
03/2016 Subject to change
Copyright © Siemens AG 2016.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified
for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
4Manual, 03/2016, A5E36633205-AA
Preface
Purpose of the documentation
This device manual supplements the S7-1500/ET 200MP
(http://support.automation.siemens.com/WW/view/en/59191792) system manual.
Functions that relate in general to the systems are described in these manuals.
The information provided in this manual and in the system/function manuals supports you in
commissioning the systems.
Conventions
The term "CPU" is used in this manual both for the CPUs of the S7-1500 automation system,
as well as for interface modules of the ET 200MP distributed I/O system.
Please also observe notes marked as follows:
Note
A note con
tains important information regarding the product described in the documentation
or its handling, or draws special attention to a section of the documentation.
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, solutions, machines, equipment and/or networks. They are
important components in a holistic industrial security concept. With this in mind, Siemens’
products and solutions undergo continuous development. Siemens recommends strongly
that you regularly check for product updates.
For the secure operation of Siemens products and solutions, it is necessary to take suitable
preventive action (e.g. cell protection concept) and integrate each component into a holistic,
state-of-the-art industrial security concept. Third-party products that may be in use should
also be considered. You can find more information about industrial security on the Internet
(http://www.siemens.com/industrialsecurity).
To stay informed about product updates as they occur, sign up for a product-specific
newsletter. You can find more information on the Internet
(http://support.automation.siemens.com).

Preface
Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
Manual, 03/2016, A5E36633205-AA 5
Open Source Software
Open-source software is used in the firmware of the product described. Open Source
Software is provided free of charge. We are liable for the product described, including the
open-source software contained in it, pursuant to the conditions applicable to the product.
Siemens accepts no liability for the use of the open source software over and above the
intended program sequence, or for any faults caused by modifications to the software.
For legal reasons, we are obliged to publish the original text of the license conditions and
copyright notices. Please read the information relating to this in the appendix.

Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
6Manual, 03/2016, A5E36633205-AA
Table of contents
Preface ................................................................................................................................................... 4
1 Documentation guide .............................................................................................................................. 7
2 Product overview .................................................................................................................................. 11
2.1 Properties............................................................................................................................... 11
3 Wiring ................................................................................................................................................... 14
4 Parameters/address space ................................................................................................................... 17
4.1 Output ranges ........................................................................................................................ 17
4.2 Parameters............................................................................................................................. 18
4.3 Declaration of parameters...................................................................................................... 20
4.4 Address space ....................................................................................................................... 21
5 Interrupts/diagnostics alarms................................................................................................................. 27
5.1 Status and error displays ....................................................................................................... 27
5.2 Interrupts ................................................................................................................................ 29
5.3 Diagnostics alarms................................................................................................................. 30
6 Technical specifications ........................................................................................................................ 31
A Dimensional drawing............................................................................................................................. 36
B Parameter data records ........................................................................................................................ 38
B.1 Parameter assignment and structure of the parameter data records .................................... 38
C Representation of analog values ........................................................................................................... 42
C.1 Representation of output ranges............................................................................................ 43
C.2 Representation of analog values in the voltage output ranges.............................................. 44
C.3 Representation of analog values in the current output ranges .............................................. 46
D Open Source Software.......................................................................................................................... 48

Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
Manual, 03/2016, A5E36633205-AA 7
Documentation guide
1
The documentation for the SIMATIC S7-1500 automation system, the CPU 1516pro-2 PN
based on SIMATIC S7-1500 and the SIMATIC ET 200MP distributed I/O system is arranged
into three areas.
This arrangement enables you to access the specific content you require.
Basic information
The System Manual and Getting Started describe in detail the configuration, installation,
wiring and commissioning of the SIMATIC S7-1500 and ET 200MP systems. For
CPU 1516pro-2 PN you use the corresponding operating instructions. The STEP 7 online
help supports you in the configuration and programming.
Device information
Product manuals contain a compact description of the module-specific information, such as
properties, wiring diagrams, characteristics and technical specifications.

Documentation guide
Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
8Manual, 03/2016, A5E36633205-AA
General information
The function manuals contain detailed descriptions on general topics regarding the SIMATIC
S7-1500 and ET 200MP systems, e.g. diagnostics, communication, motion control, Web
server, OPC UA.
You can download the documentation free of charge from the Internet
(http://w3.siemens.com/mcms/industrial-automation-systems-simatic/en/manual-
overview/Pages/Default.aspx).
Changes and supplements to the manuals are documented in a Product Information.
You can download the product information free of charge from the Internet
(https://support.industry.siemens.com/cs/us/en/view/68052815).
Manual Collection S7-1500/ET 200MP
The Manual Collection contains the complete documentation on the SIMATIC S7-1500
automation system and the ET 200MP distributed I/O system gathered together in one file.
You can find the Manual Collection on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/86140384).
SIMATIC S7-1500 comparison list for programming languages
The comparison list contains an overview of which instructions and functions you can use for
which controller families.
You can find the comparison list on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/86630375).
"mySupport"
With "mySupport", your personal workspace, you make the best out of your Industry Online
Support.
In "mySupport", you can save filters, favorites and tags, request CAx data and compile your
personal library in the Documentation area. In addition, your data is already filled out in
support requests and you can get an overview of your current requests at any time.
You must register once to use the full functionality of "mySupport".
You can find "mySupport" on the Internet (https://support.industry.siemens.com/My/ww/en).
"mySupport" - Documentation
In the Documentation area in "mySupport" you can combine entire manuals or only parts of
these to your own manual.
You can export the manual as PDF file or in a format that can be edited later.
You can find "mySupport" - Documentation on the Internet
(http://support.industry.siemens.com/My/ww/en/documentation).

Documentation guide
Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
Manual, 03/2016, A5E36633205-AA 9
"mySupport" - CAx data
In the CAx data area in "mySupport", you can access the current product data for your CAx
or CAe system.
You configure your own download package with a few clicks.
In doing so you can select:
●Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN
macro files
●Manuals, characteristics, operating manuals, certificates
●Product master data
You can find "mySupport" - CAx data on the Internet
(http://support.industry.siemens.com/my/ww/en/CAxOnline).
Application examples
The application examples support you with various tools and examples for solving your
automation tasks. Solutions are shown in interplay with multiple components in the system -
separated from the focus on individual products.
You will find the application examples on the Internet
(https://support.industry.siemens.com/sc/ww/en/sc/2054).
TIA Selection Tool
With the TIA Selection Tool, you can select, configure and order devices for Totally
Integrated Automation (TIA).
This tool is the successor of the SIMATIC Selection Tool and combines the known
configurators for automation technology into one tool.
With the TIA Selection Tool, you can generate a complete order list from your product
selection or product configuration.
You can find the TIA Selection Tool on the Internet
(http://w3.siemens.com/mcms/topics/en/simatic/tia-selection-tool).

Documentation guide
Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
10 Manual, 03/2016, A5E36633205-AA
SIMATIC Automation Tool
You can use the SIMATIC Automation Tool to run commissioning and maintenance activities
simultaneously on various SIMATIC S7 stations as a bulk operation independently of the TIA
Portal.
The SIMATIC Automation Tool provides a multitude of functions:
●Scanning of a PROFINET/Ethernet network and identification of all connected CPUs
●Address assignment (IP, subnet, gateway) and station name (PROFINET device) to a
CPU
●Transfer of the date and the programming device/PC time converted to UTC time to the
module
●Program download to CPU
●Operating mode switchover RUN/STOP
●Localization of the CPU by means of LED flashing
●Reading out CPU error information
●Reading the CPU diagnostic buffer
●Reset to factory settings
●Updating the firmware of the CPU and connected modules
You can find the SIMATIC Automation Tool on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/98161300).
PRONETA
With SIEMENS PRONETA (PROFINET network analysis), you analyze the PROFINET
network during commissioning. PRONETA features two core functions:
●The topology overview independently scans PROFINET and all connected components.
●The IO check is a fast test of the wiring and the module configuration of a system.
You can find SIEMENS PRONETA on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/67460624).

Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
Manual, 03/2016, A5E36633205-AA 11
Product overview
2
2.1
Properties
Article number
6ES7532-5ND00-0AB0
View of the module
Image 2-1 View of the module AQ 4xU/I HF

Product overview
2.1 Properties
Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
12 Manual, 03/2016, A5E36633205-AA
Properties
The module has the following technical properties:
●4 electrically isolated analog outputs
●Selection of channels for voltage output
●Selection of channels for current output
●Resolution: 16 bits including sign
●Configurable diagnostics (per channel)
The module supports the following functions:
Table 2- 1 Version dependencies of the module functions
Function
Firmware version of
the module
Configuration software
STEP 7
(TIA Portal) as of V13,
SP1 and HSP 0166
GSD file in STEP 7
(TIA Portal) V12 or higher, or
STEP 7 V5.5 SP3 or higher
Firmware update
V1.0.0 or higher
X
--- / X
Identification data I&M0 to I&M3
V1.0.0 or higher
X
X
Parameter assignment in RUN V1.0.0 or higher X X
Calibration in runtime
V1.0.0 or higher
X
---
Module-internal Shared Output (MSO) V1.0.0 or higher X
(PROFINET IO only)
X
(PROFINET IO only)
Configurable submodules / submodules
for Shared Device
V1.0.0 or higher X
(PROFINET IO only)
X
(PROFINET IO only)
You can configure the module with STEP 7 (TIA Portal) and with a GSD file.
Accessories
The following accessories are supplied with the module and can also be ordered separately
as spare parts:
●Shield bracket
●Shield terminal
●Power supply element
●Labeling strips
●U connector
●Universal front cover

Product overview
2.1 Properties
Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
Manual, 03/2016, A5E36633205-AA 13
Other components
The following component must be ordered separately:
Front connectors, including potential jumpers and cable ties
You can find additional information on accessories in the S7-1500/ET 200MP
(http://support.automation.siemens.com/WW/view/en/59191792) system manual.

Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
14 Manual, 03/2016, A5E36633205-AA
Wiring
3
This section contains the block diagram of the module and outlines various connection
options.
You can find information on wiring the front connector, creating a cable shield, etc in the
Wiring section of the S7-1500/ET 200MP
(http://support.automation.siemens.com/WW/view/en/59191792) system manual.
Note
You may use
and combine the different wiring options for all channels.
Note
Do not insert the potential jumpers included with the front connector!
Abbreviations used
Meaning of the abbreviations used in the following figures:
QV
n
Voltage output channel
QIn
Current output channel
S
n
+/S
n
-
Sense line channel
L+
Supply voltage connection
M
Ground connection
M
ANA 0 bis 3
Reference potential of the analog circuit
Pin assignment for the power supply element
The power supply element is plugged onto the front connector for powering the analog
module. Wire the supply voltage to terminals 41 (L+) and 44 (M). Use terminals 42 (L+) and
43 (M) to loop the potential to the next module.
Image 3-1 Power supply element wiring

Wiring
Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
Manual, 03/2016, A5E36633205-AA 15
Block diagram and terminal assignment for the voltage output
The following figure shows an example of the wiring options:
●2-wire connection, without compensation for line resistances.
●4-wire connection, with compensation for line resistances.
①
2-wire connection (jumper at the front connector)
CHx
Channel or 4 x channel status (green/red)
②
4-wire connection
RUN
Status display LED (green)
③
Digital Analog Converter (DAC)
ERROR
Error display LED (red)
④
Electrical isolation
PWR
LED for power supply (green)
⑤
Backplane bus interface
⑥
Power via supply module
Image 3-2 Block diagram and terminal assignment for the voltage output

Wiring
Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
16 Manual, 03/2016, A5E36633205-AA
Block diagram and terminal assignment for the current output
The following figure shows an example of the terminal assignment for current output
circuitry.
①
Load on current outputs
CHx
Channel or 4 x channel status (green/red)
②
Digital Analog Converter (DAC)
RUN
Status display LED (green)
③
Electrical isolation
ERROR
Error display LED (red)
④
Backplane bus interface
PWR
LED for power supply (green)
⑤
Power via supply module
Image 3-3 Block diagram and terminal assignment for the current output

Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
Manual, 03/2016, A5E36633205-AA 17
Parameters/address space
4
4.1
Output ranges
The module is set to voltage output type by default with output range ±10 V. You need to edit
the module parameters with STEP 7 if you want to use a different output range or output
type.
Output type and output ranges
The following table shows the output type and the respective output ranges.
Table 4- 1 Output type and output ranges
Output type
Output range
Voltage 1 V to 5 V
0 V to 10 V
±10 V
Current 0 to 20 mA
4 to 20 mA
±20 mA
Disabled
-
The tables of the output ranges, overflow, overshoot range, etc. are available in the appendix
Representation of analog values (Page 42).

Parameters/address space
4.2 Parameters
Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
18 Manual, 03/2016, A5E36633205-AA
4.2
Parameters
Parameters of AQ 4xU/I HF
The AQ 4xU/I HF is usually already integrated in the hardware catalog of STEP 7 (TIA
Portal). In this case, STEP 7 (TIA Portal) checks the configured properties for plausibility
during configuration.
However, you can also assign parameters to the module by means of the GSD file and the
configuration software of any provider. The module does not check the validity of the
parameterized properties until after the configuration has been loaded.
When you assign the module parameters in STEP 7, you use various parameters to specify
the module properties. The following table lists the configurable parameters. The effective
range of the configurable parameters depends on the type of configuration. The following
configurations are possible:
●Central operation with a S7-1500 CPU
●Distributed operation on PROFINET IO in an ET 200MP system
●Distributed operation on PROFIBUS DP in an ET 200MP system
When assigning parameters in the user program, use the WRREC instruction to transfer the
parameters to the module by means of data records; see chapter Parameter assignment and
structure of the parameter data record. (Page 38)
The following parameter settings for the channels are possible:
Table 4- 2 Configurable parameters and their defaults
Parameters
Range of values
Default setting
Parameter
assignment in
RUN
Scope with configuration software,
e.g., STEP 7 (TIA Portal)
Integrated in the
hardware catalog
as of STEP 7
(TIA Portal) as of
V13 or GSD file
PROFINET IO
GSD file
PROFIBUS DP
Diagnostics
•Missing supply voltage
L+
Yes/No No Yes Channel 1) Module 2)
•Wire break Yes/No No Yes Channel Module 2)
•Short circuit to M Yes/No No Yes Channel Module 2)
•Underflow Yes/No No Yes Channel Module 2)
•Overflow Yes/No No Yes Channel Module 2)

Parameters/address space
4.2 Parameters
Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
Manual, 03/2016, A5E36633205-AA 19
Parameters
Range of values
Default setting
Parameter
assignment in
RUN
Scope with configuration software,
e.g., STEP 7 (TIA Portal)
Integrated in the
hardware catalog
as of STEP 7
(TIA Portal) as of
V13 or GSD file
PROFINET IO
GSD file
PROFIBUS DP
Output
•Output type Current/voltage Voltage Yes Channel Channel
•Output range See section
Output ranges
(Page 17)
±10 V Yes Channel Channel
•Reaction to CPU STOP •Turn off
•Keep last
value
•Output sub-
stitute value
Turn off Yes Channel Channel
•Substitute value See Table B-4
Valid substitute
value for the
output range
(Page 41)
0 Yes Channel Channel
1)
If you enable diagnostics for multiple channels, you will receive an alarm surge on failure of the supply voltage because
each
enabled channel will detect this fault. You can prevent this message burst by assigning the diagnostics function to one
channel only.
2) You can set the effective range of the diagnostics for each channel in the user program with data records 64 to 67.
Short-circuit detection
The diagnostics for short circuit to ground can be configured for the voltage output type.
Short-circuit detection is not possible for small output values. The output voltages must
therefore be below -0.1 V or above +0.1 V.
Open-circuit detection
The diagnostics for open circuit can be configured for the current output type. Wire break
detection is not possible for small output values; the output voltages must therefore be below
-0.4 mA or above +0.4 mA.

Parameters/address space
4.3 Declaration of parameters
Analog Output Module AQ 4xU/I HF (6ES7532-5ND00-0AB0)
20 Manual, 03/2016, A5E36633205-AA
4.3
Declaration of parameters
Missing supply voltage L+
Enabling of the diagnostics, with missing or too little supply voltage L+.
Wire break
Enabling of the diagnostics if the line to the actuator is broken.
Short-circuit to ground
Enabling of the diagnostics if a short-circuit of the output to MANA occurs.
Overflow
Enabling of the diagnostics when the output value exceeds the overrange.
Underflow
Enabling of the diagnostics when the output value violates the underrange.
Reaction to CPU STOP
Determines the reaction of the output to the CPU going into STOP state.
Substitute value
The substitute value is the value that the module outputs in case of a CPU STOP.