Siemens MBR-MP User manual

P/N 315-094882-5
Installation Instructions
Models MBR-MP and MBR-3MP
Mounting Plates
Mounting the MBR-MP in an MME-3 Backbox:
1. Remove the nuts and washers from the 4 studs in the enclosure and place them to one side.
2. Mount the MBR-MP plate on the studs.
3. Secure the mounting plate in place using the hardware that was removed from the studs.
Figure 1
Mounting the MBR-MP in an MME-3 Enclosure
Siemens Industry, Inc.
Building Technologies Division
Florham Park, NJ
Siemens Building Technologies, Ltd.
Fire Safety & Security Products
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 Canada

Mounting the MBR-MP and MBR-3MP in an MLE-6 Backbox:
1. Remove the nuts and washers from the 8 studs in the enclosure and place them to one side.
2. Mount the MBR-MP and MBR-3MP on the studs, as shown in Figure 2.
3. Secure the plates in place using the hardware that was removed from the studs.
Figure 2
Mounting the MBR-MP and MBR-3MP in an MLE-6 Enclosure
P/N 315-094882-5