Sight mark SS2000 User manual

USER MANUALUSER MANUAL
SS2000 Flashlight
English

Sightmark offers a wide range of products that include red dot scopes, reflex sights,
rangefinders, riflescopes, laser sights, night vision and award-winning flashlights and
boresights. Sightmark products are inspired by military and law enforcement applications.
All products are designed to be the most effective weapon accessories possible.
Sightmark - MAKE YOUR MARK
ABOUT SIGHTMARK®
www.sightmark.com

SS2000 Flashlight ........................................................................ 1- 10 English
To view this manual in other languages go to
www.sightmark.com

1
FEATURES:
• 2000 lumen Cree® LED
• Selector switch improves mode selection agility
• Operating Modes: 2000 lumen, 280 lumen, Strobe
• Pressure switch
• Recoil resistant
• Type II mil-spec anodizing
• Waterproof
• Rechargeable batteries
• Weapons mountable
ENGLISH

2
TECHNICAL SPECIFICATIONS
SS2000 INCLUDES:
• Two 18650 Li-Ion rechargeable
batteries
• Recharger
• 3 Filters (green, red, blue)
• Weapons mount
• Pressure pad
• Lanyard
Bulb type 3x Cree T6 LED
Bezel Diameter 59mm
Output Power Max 2000 lumens
Battery life 2000 Lumens - 1 hr
280 Lumens - 10 hrs.
Battery type 2x 18650Li-Ion recharge-
able batteries
Finish Type II anodizing
Dimensions 251x29mm / 25.4mm
(mounting section)
Weight
(includes batteries)
20.5oz
Waterproof rating IPX-7, submergible to
1m for 1 hr

3
1. Bezel head cap
2. Bulb assembly
3. Selector switch
4. Flashlight body
5. Weapon mount placement
6. Battery compartment
7. Battery cap/push button switch
8. Battery cap/pressure switch
9. Weapon mount
10. Lens lter
11. Recharger
DIAGRAM
8
9
10
11
1
2
3
4
5
6
7

4
ABOUT THE SIGHTMARK SS2000 FLASHLIGHT
Equipped with a selector switch that cycles through three settings; 2,000 lumen, 280 lumen or strobe, the Sight-
mark SS2000 makes a great additional to any tactical or hunting kit. The unique strobe mode feature of the Sight-
mark SS2000 extends the applications to emergency situations as an alert or as a decoy to distract and disorient
targets. The Sightmark SS2000 Tactical Flashlight is equipped with two rechargeable batteries, a battery recharger,
a weapon mount, on/o push button, pressure switch and three lters. The unit is recoil resistant, waterproof, light-
weight and protected by Sightmark’s limited lifetime warranty. This is the perfect addition to the award winning
Triple Duty Series- shooting, hunting, tactical as well as for camping, hiking, home use and vehicle emergencies.
BATTERIES
The SS2000 is powered by two CR18650 rechargeable batteries.
To insert or remove the battery:
1) Rotate the battery cap/switch (7/8) counterclockwise until it separates from the ashlight body (5).
2) Insert both CR18650 rechargeable batteries into the battery compartment (6), with the positive end rst.
3) Replace the battery cap/switch (7/8) onto the ashlight body (4). To tighten, rotate the cap/switch clockwise until
xed rmly. Do not overtighten.
Charging the CR18650 batteries
1) Plug in the recharger (11) into a wall outlet. The LED indicators should turn green.
2) Place the two CR18650 batteries in the recharger according to the polarity indication on the recharger. The LED
indicators should turn red.
3) Once charging is complete, the LED indicators will turn green.
4) Remove the batteries, unplug the recharger and store properly.
NOTE:Charging from full-discharge to full charge takes approximately 5 hours.

HALF BRIGHTNESS
SWITCH OPERATION
After inserting the batteries, install the desired battery cap/switch.
Push button switch (7):
1) For momentary operation, press lightly on the rubber button on the back of the switch.
2) For permanent operation, press the rubber button until you hear or feel a “click”, then release.
3) To turn the ashlight o, press the rubber button a second time until you hear or feel a “click”, then release.
Pressure switch (8):
1) For momentary operation, press rmly on the pressure pad.
2) To turn the ashlight o, release the pressure on the pressure pad.
5
SELECTOR SWITCH OPERATION
The selector switch changes the ashlight’s mode which includes full brightness, low brightness, and strobe mode.
This allows the user to rapidly change the mode of operation. The mode will remain when the ashlight is turned
on and o.
To operate:
1) Locate the selector switch (3) behind the bulb assembly (2).
2) Rotate the switch to one of the selection points marked with the icon. When a click is felt and heard the ash-
light’s mode will change.
STROBEFULL BRIGHTNESS

6
MOUNTING
Before mounting the ashlight onto your rearm, be sure the rearm
is unloaded and safe to handle.
To mount:
1) Using the Allen wrench, loosen the two screws on the weapon mount’s
(9) ring.
2) Remove the top part of the ring mount and insert the weapon place-
ment (5) portion of the ashlight into the mount’s base ring.
3) Attach the top part of the ring mount and tighten the ring screws. Do
not over tighten.
4) Next, loosen the mounting bolt on the weapon mount using the pro-
vided Allen wrench.
5) Position the weapon mount onto your rearm’s base. Due to the size of the ashlight, the head must extend
beyond the end of the quad rail to t properly.
ATTACHING LENS FILTERS
The SS2000 Triple Duty Flashlight includes a blue, red and green lens lter (10). Green lters provide the best visibil-
ity in a forest or jungle setting while using the lowest light spectrum possible. Red lters help perserve night vision
and assists with varmint hunting without easily being detected by prey. They also assist users with reading maps in
low light conditions. Blue lters are ideal for tracking game, as they assist in illuminating blood trails.

WARNING
Before handling the ashlight, read and understand the contents of your rearm’s manual, and the Sightmark
SS2000 ashlight manual. Follow all standard safety precautions and procedures during rearm operation, even
when the ashlight is not in use.
MAINTENANCE
The ashlight may be cleaned using a soft cloth and water, or a gun cleaning solvent, when exposed to dirt, dust, or
other residue. Clean the lens using a soft cloth dipped in water or denatured alcohol. To clean residue from contacts,
use a cotton swab dipped in denatured alcohol. Maintain threads and O-rings by applying silicon-based grease to
those areas.
STORAGE
Make sure that your Sightmark tactical ashlight is securely attached to your rearm before storing, and be sure the
unit is turned o. Remove the battery if the ashlight will be stored for an extended period of time.
To attach the lens lter:
1) Locate the bezel head cap (1) and unscrew counterclockwise until the bezel head cap is removed.
2) Place the preferred lens lter on top of the clear protective lens or t the lter in the bezel head cap.
3) Screw clockwise the bezel head cap until rmly tight. Do not over tighten.
7

8
SIGHTMARK LIMITED WARRANTY
Please visit www.sightmark.com for warranty details and information.
• NEVER point the ashlight directly at, or into, an eye. This may cause damage to the eye or blindness. The ashlights
produce enough light to identify an individual without direct illumination to the face.
• Avoid looking directly into the ashlight’s beam.
• Avoid shining the ashlight into mirrors or other reective surfaces.
• Avoid hitting or dropping the unit.
• ALWAYS check that the chamber of your weapon is clear before mounting or dismounting the ashlight.
• ALWAYS remove the ashlight when cleaning or performing other maintenance on your rearm.
• The ashlight should be tested during periods of non-use to make sure it is still operating properly.
• NEVER place the ashlight bulb side down on a surface while it is turned on. The bulb generates heat that can
damage the unit or the surface it is on.
Failure to follow standard rearm safety precautions and procedures, as well as the above warnings, is dangerous
and may result in serious injury, damage to property, or death.
2000

www.sightmark.com
www.sightmark.com