3W CREE Rechargeable Torch 9602 Instructions
Please read carefully before use and retain
for future reference.
BATTERY INSTALLATION
• Install the battery with the positive end (with
groove) towards the torch head.
• The battery is pre-charged. D n t charge
bef re first use.
• When light from the torch becomes dull, it is time
to recharge the battery.
RE-CHARGING
• Remove the cover from
charger socket and plug the
charger into the torch.
• When the charger is plugged
into the mains socket, the
charger LED will be green.
Plug the charger into the
socket on the torch.
• When charging, the charger LED will be red.
• Once the torch is fully charged, the LED will turn
green.
• Always discharge the torch fully before re-
charging.
• Once fully discharged the battery will take up to 7
hours to re-charge.
OPERATION
• To turn the torch on, press the black button on the
shaft of the torch until it clicks.
• The torch has 3 different functions: High beam,
normal and flashing. To switch between the
functions, gently press down the black button.
• To turn off, press the black button in until it clicks
again.
• Once performance reduces, the torch will need to be
recharged.
WARNING
• Never point the torch directly towards your eyes or
the eyes of others.
• Do not over charge or charge for longer than 7
hours.
CLEANING
• Wipe clean with a soft cloth.
• D NOT use abrasives.
DISPOSAL
• Dispose of all paper, cartons and plastic in
accordance with your local recycling regulations. At
the end of the product’s lifespan please dispose of it
at an authorised household waste recycling centre.