SignalFire OTDR ZS1000-A User manual

OTDROTDR
U S E R 'S M A N U A L
2020/09
OPTICAL TIME DOMAIN REFLECTOMETER
ZS1000-A

01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
Warning and note
Introduction of the machine
OTDR-Measurement Interface
OTDR-Average Measurement
OTDR-Real-time measurement
OTDR-Event list
OTDR-Cursor selection and waveform zoom in/out
Menu
Menu-Files
Menu-Measurement Settings
Menu-System Settings
Menu-About
OPM(optional)
VFL
Upgrading and Charging
Detail parameters
CATALOGUE
CATALOGUE

OTDR Z S 1 0 0 0 - A OTDR Z S 1 0 0 0 - A
01 02
Introduction of the machine
ESC
Warning and note
OPTICAL TIME DOMAIN REFLECTOMETER
Any undefined change or modification of this manual will deprive you of the right to operate the equipment.
To reduce the risk of fire or electric shock, do not expose the equipment to rain or humidity.
To prevent electric shock, please do not open the shell, and it must be repaired by qualified personnel.
Please ensure no signal in fiber before testing,active fiber may damage the device and not in warranty range.
NOTE
WARNING
As the laser is harmful to the eyes, don't look directly at the laser outlet and don't attempt to disassemble the cabinet.
PRECAUTIONS FOR USE
Using the battery:
The device can be recharged with a special battery, and can not be mixed with different types or capacity batteries.
Avoiding condensation:
Sudden changes in temperature should be avoided. Do not use the device immediately after moving the device from the
cold area to the hot area, or when the room suddenly heats up, because the device may have condensation phenomenon.
If the temperature changes abruptly , stop using it and take out the battery, and the power can be switched on after at
least an hour.
Storage:
When the device is not used for a long time, please take out the battery to avoid the damage caused by battery leakage .
※ The content of this manual is for reference only, and everything is based on the actual product.
OPTICAL TIME DOMAIN REFLECTOMETER
OTDR connector
VFL connector
Confirming
Average measurement
Real-time measurement
Power
Full screen
Zoom control
VFL control
OPM control (optional)
File operation
Cursor select
Charge indicator
Power adapter socket
TF(micro SD) card slot
USB interface
Fiber direction moving key
OTDR and VFL cannot be used at the
same time, otherwise the equipment
will be damaged.

OTDR Z S 1 0 0 0 - A OTDR Z S 1 0 0 0 - A
03 04
Long press to turn on, short press to turn off.
OTDR-Measurement Interface
OPTICAL TIME DOMAIN REFLECTOMETER
Date and time
The distance
and attenuation Scale
Events list
Measurement setting info
File name
Waveform
region
Battery
2020-06-01 FRI 17:25
8_0001.sor
0.00 A-B:10.057 km 1.81 dB 0.00 dB/km
A 0.000 km
2.000km/div
5.00
10.00
15.00
20.00
25.00
30.00
35.00
40.00
45.00
50.00
No.
2/3 2.65 0.1810.057 -36.08 1.81
File Info: 1310nm 20km 5ns
Dis. Loss Ref. dB/km C.Loss
B 10.057 km
1 2 3
OTDR-Average Measurement
2020-06-01 FRI 17:25
*
0.00 A-B:0.000 km 0.00 dB 0.00 dB/km
A 0.000 km
B 0.000 km
2.000km/div
5.00
10.00
15.00
20.00
25.00
30.00
35.00
40.00
45.00
50.00
Laser Radiation！Do not look directly to the laser！
Measure Info: 1310nm 20km 5ns
Press "SCAN" button to start average measurement. " When finished, press "File button to enter the storage interface.
OPTICAL TIME DOMAIN REFLECTOMETER
SCAN

OTDR Z S 1 0 0 0 - A OTDR Z S 1 0 0 0 - A
05 06
OPTICAL TIME DOMAIN REFLECTOMETER OPTICAL TIME DOMAIN REFLECTOMETER
2020-06-01 FRI 17:25
*
0.00 A-B:0.000 km 0.00 dB 0.00 dB/km
A 0.000 km
B 0.000 km
2.000km/div
5.00
10.00
15.00
20.00
25.00
30.00
35.00
40.00
45.00
50.00
Laser Radiation！Do not look directly to the laser！
Real time scanning...
Measure Info: 1310nm 20km 5ns
OTDR-Real-time measurement
Change range
During measuring, you can change range, zoom in or out (see P7 for details).
If you turn on RT analyse, it will analyse events when you press "REAL" again.
change the cursor position,
REAL ENTER
OTDR-Event list
Optic fiber start
Reflection event
Attenuation event
Gain event
optic fiber ending
2020-06-01 FRI 17:25
No.
1/3
3/3
0.00
--.--
--.--
0.18
0.000
14.154
-34.04
-20.95
0.00
5.20
File Info: 1310nm 20km 5ns
Dis. Loss Ref. dB/km C.Loss
2/3 2.65 0.1810.057 -36.08 1.81
No.
2/3 2.65 0.1810.057 -36.08 1.81
Dis. Loss Ref. dB/km C.Loss
Event list on main interface
Press "ENTER" button to show the whole event list. Select an event, then press " ENTER" button to return and locate
to this event.

OTDR Z S 1 0 0 0 - A OTDR Z S 1 0 0 0 - A
07 08
Menu
Full screen
Switch
cursor
Move cursor
(left/right)
Switch the four menus
OPTICAL TIME DOMAIN REFLECTOMETER OPTICAL TIME DOMAIN REFLECTOMETER
OTDR-Cursor selection and
waveform zoom in/out
Keep pressing " " button, then press Up/Down button to zoom in or out vertically, press Left/Right button to zoom
in or out horizontally.
Zoom in or out
vertically and
horizontally
(Combinatorial key)
0.00
A 0.000 km
2 3
5.00
10.00
15.00
20.00
25.00
30.00
35.00
40.00
45.00
50.00
B 10.057 km
Horizontal scaling
Vertical scaling
16.20 1 2 3
17.60
19.00
20.40
21.80
23.20
24.60
26.00
27.40
28.80
30.20
B 10.057 km
A 0.000 km
2020-06-01 FRI 17:25
File Info:
20200601
20200601
20200601
20200601
20200601
20200601
20200601
20200601
Files Measure Set. System Set. About
2020-06-01 FRI 17:25
Pulse Width
Average Time
Reflection Threshold
End Threshold
Splice Loss
250ns
15s
65.0dB
3.0dB
0.05dB
Wavelength
Scan Mode
Range
Manual
1650nm
20km
Module About
Files Measure Set. System Set. About
2020-06-01 FRI 17:25
Backlight
Auto shutdown
Date format
Time format
Auto name
60
30Min
YYYY-MM-DD
24-hour format
Open
Common Storage Administration Other
Language
Voice
English
Close
Measure Set.
Files
Files Measure Set. System Set. About
2020-06-01 FRI 17:25
CPU ID:
A798FAD6
Hardware version:
TEN5A03_PL_V0.0
TEN1A20V35_ANALOG_V3.2
Software version:
SEN5A03_PL_V0.0.0
Files Measure Set. System Set. About

OTDR Z S 1 0 0 0 - A OTDR Z S 1 0 0 0 - A
09 10
Menu-Files Menu-Measurement Settings
OPTICAL TIME DOMAIN REFLECTOMETER OPTICAL TIME DOMAIN REFLECTOMETER
2020-06-01 FRI 17:25
File Info:
20200601
20200601
20200601
20200601
20200601
20200601
20200601
20200601
Files Measure Set. System Set. About
Rename
Delete
2020-06-01 FRI 17:25
File Info: 1310nm 20km 5ns
Module About
133210_0003.sor
133210_0004.sor
133210_0006.sor
133210_0007.sor
133210_0005.sor
2020-04-19
2020-04-19
2020-04-19
2020-04-19
2020-04-19
...
133210_0001.sor
133210_0002.sor
2020-04-19
2020-04-19
2020-06-01 FRI 17:25
File Info:
About
20200528
20200527
20200525
20200524
20200526
20200601
20200530
20200529 Rename
Delete
q
1
w
2
e
3
r
4
t
5
y
6
u
7
i
8
o
9
p
0
a s dfghjk l
z x cvbn m
en Enter
Space
20200601
._#
Files Measure Set. System Set. About
Files Measure Set. System Set. About
Press "MENU" button or "File" button to enter the files interface.
Rename
Open " Delete/Rename " tips
Open waveform thumbnails
2020-06-01 FRI 17:25
Pulse Width
Average Time
Reflection Threshold
End Threshold
Splice Loss
1us
15s
65.0dB
3.0dB
0.05dB
Wavelength
Scan Mode
Range
Manual
1550nm
20km
Files
Real time analyse Close
Reflective Rate
Scatter Coefficient
Optical Detector
52.1
1.46832
Open
Module AboutFiles
Measure Set. System Set.
About
ENTER
Pulse Width
ESC
1us
500ns
2.5us
ENTER
Range
ESC
20km
10km
40km
ENTER
Wavelength
ESC
1550nm
1310nm

OTDR Z S 1 0 0 0 - A OTDR Z S 1 0 0 0 - A
11 12
Menu-System Settings Menu-About
OPTICAL TIME DOMAIN REFLECTOMETER OPTICAL TIME DOMAIN REFLECTOMETER
2020-06-01 FRI 17:25
USB connection
OTG
Common Storage Administration Other
Default storage device information
Format default storage device
2020-06-01 FRI 17:25
Backlight
Auto shutdown
Date format
Time format
Auto name
60
30Min
YYYY-MM-DD
24-hour format
Open
Common Storage Administration Other
Language
Voice
English
Close
Files 2020-06-01 FRI 17:25
Self-examination
Common Storage Administration Other
Hardware module information
Software module information
2020-06-01 FRI 17:25
Common Storage Administration Other
Restore factory settings
Measure Set.
Files
Switch by right/left button
Date setting
Time setting 17:25
2020-06-01
Files Measure Set. System Set. About
Files Measure Set. System Set. About
Files Measure Set. System Set. About
Files Measure Set. System Set. About
2020-06-01 FRI 17:25
CPU ID:
A798FAD6
Hardware version:
TEN5A03_PL_V0.0
TEN1A20V35_ANALOG_V3.2
Software version:
SEN5A03_PL_V0.0.0
Measure Set. System Set.
Files
Files Measure Set. System Set. About

OTDR Z S 1 0 0 0 - A OTDR Z S 1 0 0 0 - A
13 14
OPM(optional) VFL
This device has VFL function, the output power is about 1mW. Press "VFL" button to control red laser on-flashing-
off. When Laser is on, the prompt icon occur at upper right corner.
OPTICAL TIME DOMAIN REFLECTOMETER OPTICAL TIME DOMAIN REFLECTOMETER
Press "OPM" button to turn on the OPM function, " " to open the function menu," "to hide the function menu.
2020-06-01 FRI 17:25
Do not stare into beam!
Wavelength
VFL On
Save file
REF set.
REF view
Open file
Offset
dBm
dB
mw
000.00
+00.00
+00.00
1310nm
REF:-70.00dBm
Measure Set. System Set. Module About
Files
2020-06-01 FRI 17:25
Do not stare into beam!
dBm
dB
mw
000.00
+00.00
+00.00
1310nm
REF:-70.00dBm
Measure Set. System Set. Module About
Files
Function button
2020-06-01 FRI 17:25
测量波长
保存文件
REF设定
REF查看
打开文件
偏移量
dBm
dB
nW
0.10
-70.00
0.00
1310nm
REF:-70.00dBm
Save file
Open file
REF set.
REF view
Wavelength
Offset
2020-06-01 FRI 17:25
dBm
dB
nW
0.10
-70.00
0.00
1310nm
REF:-70.00dBm
2020-06-01 FRI 17:25
8_0001.sor
0.00 A-B:10.057 km 1.81 dB 0.00 dB/km
A 0.000 km
2.000km/div
5.00
10.00
15.00
20.00
25.00
30.00
35.00
40.00
45.00
50.00
No.
2/3 2.65 0.1810.057 -36.08 1.81
File Info: 1310nm 20km 5ns
Dis. Loss Ref. dB/km C.Loss
B 10.057 km
1 2 3

OTDR Z S 1 0 0 0 - A OTDR Z S 1 0 0 0 - A
15 16
Upgrading and Charging
OPTICAL TIME DOMAIN REFLECTOMETER OPTICAL TIME DOMAIN REFLECTOMETER
Measure Set. System Set.
Files
Files Measure Set. System Set. About
CPU ID:
A798FAD6
Hardware version:
TEN5A03_PL_V0.0
TEN1A20V35_ANALOG_V3.2
Software version:
SEN5A03_PL_V0.0.0
2020-06-01 FRI 17:25
Insert the adapter to device,
and finish charging in 8-10
hours.
Red charge indicator means
charging, while green means
finish.
Upgrading as following:
Copy new firmware in TF card Insert TF card (OTDR power off) Press "MENU", "SCAN" and hold
Press " " Upgrading
Appearance size
3.5 inch colour LCD
0.1m
Internal( TF card is optional )
USB
Built-in rechargeable battery
Standby>15 hour, measurement>8 hour
0.75Kg
197mmx107mmx67mm
Detail parameters
LCD
Min. Distance resolution
Data storage
Communication connector
Battery
Battery lifetime
Weight
Dynamic range 28/26dB