SIGNIFY GARDCO DuraForm Series User manual

Flood
DuraForm
Accessory Installaon Instrucons
6/26/2019 page 1 www.gardcolighng.com 442295035451 Rev A
STEP 1:
Align Visor mounting holes to mounting points on hous-
ing.
STEP 2:
Secure Visor to housing using the provided slotted hex
head 10-24 x 1/2” screws using 27 in-lbs torque.
VSR-Visor
Can be installed top or boom
GSH-Glare Shield
Can be installed le or right
STEP 1:
Align Glare Shield mounting holes to mounting points on
housing.
STEP 2:
Secure Glare Shield to housing using the provided slot-
ted hex head 10-24 x 1/2” screws using 27 in-lbs torque.

6/26/2019 page 2 www.gardcolighng.com 442295035451 Rev A
DuraForm Accessory Installaon Instrucons
WRG-Wireguard
WRG + VSR or GSH
Wireguard nested in Visor or Glare Shield
STEP 1:
Align Wireguard to mounting points on housing as shown
below.
STEP 2:
Insert two of the provided spacers between the wireguard
clip and the housing.
STEP 3:
Secure Wireguard to housing using the provided slotted
hex head 10-24 x 5/8” screws using 27 in-lbs torque.
STEP 1:
Align Visor or Glare Shield and Wireguard to mounting
points on housing as shown below.
STEP 2:
Insert two of the provided spacers between the wireguard
clip and the Visor or Glare Shield.
STEP 3:
Secure Wireguard to housing using the provided slotted hex
head 10-24 x 5/8” screws using 27 in-lbs torque.
Note: Wireguard can be mounted over Visor or Glare Shield.
When nesting wireguard and Visor or Glare Shield together use
the longer 5/8” screws that are provided with the Wireguard.