SIIG 1x4 HDMI 1.3 Distribution Amplifier User manual

1
1x4 HDMI 1.3 Distribution
Amplifier
Quick Installation Guide
04-0557A
Introducing the 1x4 HDMI
The1x4HDMI1.3DistributionAmplifierprovidesthemost
costeffectiveandadvancedHDMI1.3splittersolutionon
the market, by which the high definition video and high
quality audio can be transmitted to 4 different locations
without losing quality.
FeaturesandBenefits
• HDMI 1.3c and HDCP 1.2 compliant
• DVI 1.1 compliant
• Supports Deep Color and xvYCC color space
• Video bandwidth: 6.75 Gbps (single-link 225MHz)
• Frequency range: 25MHz – 225MHz
• Audio support: DTS-HD Master Audio, Dolby
TrueHD, Dolby Digital, DTS, DVD-Audio, LPCM,
SACD,MPCM
• Input TMDS signal: 1.2V (peak-to-peak)
• Input DDC signal: 5V (peak-to-peak)
PackageContents
•1x4HDMI1.3DistributionAmplifier
• Power adapter (5V, 2A)
• Quick Installation Guide

•HDMI In: HDMI input source
•HDMI Out: Distributed HDMI outputs
•USB In: For firmware update use only
•Power Indicator: When power on, the LED will
blink
•DC In: 5V 2A
Note: WhentheconnectedHDMIequippedmonitor
is verified as HDMI and HDCP compliant, the
corresponding green LED will blink.
Hardware Installation
BroadcastsHDMIsignalto4HDMIdisplays
1. Switch off all devices, including monitors.
2. Connect the LCD(s) to the HDMI Out(s).
3. Connect an HDMI source (such as a Blu-ray Disc
player) to the HDMI In.
4. Plug in 5V DC power supply.
5. Power on the HDMI monitors.
6. Power on the HDMI source.
Layout
Figure 1: Back Layout
HDMI In
HDMI Out
USB In
Power Indicator
DC In

3
Technical Support and Warranty
QUESTIONS? SIIG’sOnlineSupporthasanswers! Simplyvisitour
web site at www.siig.com and click Support. Our online support
databaseisupdateddailywithnewdriversandsolutions. Answers
toyourquestionscouldbejustafewclicksaway. Youcanalsosubmit
questions online and a technical support analysts will promptly
respond.
SIIGoffersa3-yearmanufacturerwarrantywiththisproduct. Please
see our web site for more warranty details. If you encounter any
problemswiththisproduct,pleasefollowtheproceduresbelow.
A) If it is within the store's return policy period, please return the
producttothestorewhereyoupurchasedfrom.
B) Ifyourpurchasehaspassedthestore'sreturnpolicyperiod,please
followthese stepsto have theproduct repaired orreplaced.
Step1: SubmityourRMArequest.
Go to www.siig.com, click Support, then RMA to submit a
request to SIIG RMA. If the product is determined to be
defective,anRMAnumberwillbeissued.
Step2: After obtaining an RMAnumber, ship the product.
•Properlypacktheproductforshipping. Allsoftware,cable(s)
andanyotheraccessoriesthatcamewiththeoriginalpackage
mustbeincluded.
•Clearly write your RMA number on the top of the returned
package. SIIGwillrefusetoacceptanyshippingpackage,and
will not be responsible for a product returned without an
RMA number posted on the outside of the shipping carton.
•Youare responsiblefor thecost ofshipping. Shipthe product
to the following address:
SIIG,Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA#:
•SIIG will ship the repaired or replaced product via Ground
in the U.S. and International Economy outside of the U.S. at
nocosttothecustomer.

1x4HDMI1.3DistributionAmpliferisatrademarkofSIIG,Inc. SIIGandtheSIIGlogoareregistered
trademarksofSIIG,Inc. Othernamesusedinthispublicationareforidentificationonlyandmaybe
trademarksoftheirrespectivecompanies.
June, 2009 Copyright © 2009 by SIIG, Inc. All rights reserved.
About SIIG, Inc.
Foundedin1985,SIIG,Inc.isaleadingcomputerupgrademanufacturer
of I/O connectivity products, including PCIe, PCI & ISA serial and
parallel ports, USB, Serial ATA & UltraATA controllers, FireWire
(1394a/b),networking,soundcards,andotheraccessories. SIIGisthe
premierone-stopsourceofupgrades.
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendly
features, and are backed by an extensive manufacturer warranty.
High-quality control standards are evident by the overall ease of
installation and compatibility of our products, as well as one of the
lowest defective return rates in the industry. SIIG products can be
found in computer retail stores, mail order catalogs, through major
distributors, system integrators, and VARs in the Americas and the
UK,andthroughe-commercesites.
PRODUCT NAME
1x4 HMDI 1.3 Distribution Amplifier
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: [phone]