SIIG AV-GM05F3-S1 User manual

1x6 12G/6G/3G/HD/SD-SDI Distribution
Amplifier with Reclocking
P/N: AV-GM05F3-S1

Safety and Notice
The AV-GM05F3-S1 1x6 12G/6G/3G/HD/SD-SDI Distribution Amplifier with Reclocking has been
tested for conformance to safety regulations and requirements, and has been certified for
international use. However, like all electronic equipments, the AV-GM05F3-S1 should be used
with care. Please read and follow the safety instructions to protect yourself from possible
injury and to minimize the risk of damage to the unit.
●Follow all instructions and warnings marked on this unit.
●Do not attempt to service this unit yourself, except where explained in this manual.
●Provide proper ventilation and air circulation and do not use near water.
●Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
●Use only the power adapter and power cords and connection cables designed for this unit.
●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
TABLE OF CONTENTS
INTRODUCTION................................................................................................................ 1
FEATURES ........................................................................................................................ 1
PACKAGE CONTENTS...................................................................................................... 1
SPECIFICATIONS.............................................................................................................. 2
PANEL DESCRIPTIONS.................................................................................................... 4
HARDWARE INSTALLATION ............................................................................................ 5
WARRANTY....................................................................................................................... 6
SIGNAL MEASUREMENT.................................................................................................. 7

1
INTRODUCTION
The AV-GM05F3-S1 receives one SDI input, perfectly duplicates it, and re-transmits six SDI
outputs for real time multi-viewing. It is a reliable video device splitting a SDI, HD-SDI, 3G-SDI,
6G-SDI, or 12G-SDI video source to six SDI compliant displays at the same time.
FEATURES
●12G/6G/3G/HD/SD-SDI distribution
●Six separately buffered and reclocked outputs
●Cable equalization (Beldon 1694A) and signal retiming
●LED indication of signal lock and video rate
●Pass ancillary data and embedded audio
●Automatic input signal detection
●Reclocking SDI signals for cascading and thus longer transmission
●Inter-locked power supply for better fixedness
●Very low power consumption
PACKAGE CONTENTS
●1x AV-GM05F3-S1
●1x 5V power adapter
●1x User Manual

2
SPECIFICATIONS
Model Name
AV-GM05F3-S1
Technical
SDI standard
SMPTE / DVB-ASI
Multi-Rate Support
Auto detection of SD, HD, 3G, 6G or 12G Signals
SDI Compliance
SMPTE 424M, SMPTE 292M, SMPTE 344M, SMPTE 259M, DVB-ASI,
ST-2081(6G), ST2082(12G)
SDI Data rates
1.485 / 2.97 / 5.94 / 11.88 Gbps
Output impedance
75
Reclocking
Yes
Cable equalization
Yes
Audio support
Yes
RP-198 pathological
patterns
Immune
PCB stack-up
6-layer board [impedance control —differential 100; single 75]
Input
1x BNC [SDI]
Output
6x BNC [SDI]
BNC connector
75inter-locked socket
Eye patten
characteristics[12G]
Amplitude: Within 800mV (<10%)
Rise/Fall time: Less than 45ps
Return Loss: 6dB (6G to 12GHz)
Timing jitter: <8.0 UI (10Hz to
1188MHz)
Alignment jitter: <0.3 (100KHz to
1188MHz)
Mechanical
Housing
Metal enclosure
Dimensions
[L x W x H]
Model
167 x 67 x 26mm [6.6” x 2.6” x 1”]
Package
264 x 170 x 77mm[10.3" x 6.7" x 3"]
Carton
430 x 358 x 291mm[1'4" x 1'2" x 11.5"]
Weight
Model
397g [ 14oz]
Package
780g [1.7lbs]
Fixedness
Inter-locked power supply
Power supply
5V 0.85A DC
Power consumption
2 Watts [max]
Operation
temperature
0~40°C [32~104°F]

3
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
The measurement results are from Phabrix QX with SDI through 1m (3.3ft) long Belden
1694A.

4
PANEL DESCRIPTIONS
Front Panel
1. LED indicator (Lock/Rate/Power)
Lock –When the input is detected, the LED will be bright
Rate –When the input source is more than HD, such as 3G, 6G or 12G, the LED will be bright
Power –When the device is powered, the LED will be bright
Rear Panel
2. 12G/6G/3G/HD/SD-SDI output
3. 12G/6G/3G/HD/SD-SDI input
4. 5V DC power jack

5
HARDWARE INSTALLATION
1. Connect a camera or other devices equipped with 12G/6G/3G/HD/SD-SDI outputs to
AV-GM05F3-S1 12G/6G/3G/HD/SD-SDI input.
2. Connect devices equipped with 12G/6G/3G/HD/SD-SDI inputs (e.g. monitors or video processors)
to AV-GM05F3-S1 12G/6G/3G/HD/SD-SDI outputs.
3. Plug power adapter cable into 5V DC power jack.

6
WARRANTY
The SELLER warrants the AV-GM05F3-S1 1x6 12G/6G/3G/HD/SD-SDI Distribution
Amplifier with Reclocking to be free from defects in the material and workmanship for 3
years from the date of purchase from the SELLER or an authorized dealer. Should this
product fail to be in good working order within 3 years warranty period, The SELLER, at its
option, repair or replace the unit, provided that the unit has not been subjected to accident,
disaster, abuse or any unauthorized modifications including static discharge and power
surge. This warranty is offered by the SELLER for its BUYER with direct transaction only. This
warranty is void if the warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the current
price of parts and labor in effect at the time of repair. Such repairs are warranted for 90
days from the day of reshipment to the BUYER. If the unit is delivered by mail, customers
agree to insure the unit or assume the risk of loss or damage in transit. Under no
circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without
limitations, any other implied warranty or fitness or merchantability for any particular
purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan
are responsible for shipping charges to and from the SELLER. Cables are limited to a 30 day
warranty and cable must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate.
However, The SELLER assumes no responsibility for any inaccuracies that may be contained
in this manual. The SELLER will NOT be liable for direct, indirect, incidental, special, or
consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages. Also, the technical information contained
herein regarding the AV-GM05F3-S1 features and specifications is subject to change
without further notice.
April, 2018
Support
For more info or tech support
http://www.siig.com/support

7
SIGNAL MEASUREMENT