Silencer 75SL User manual


UM_FULL_75SL_REV_A 2
Contents
CHANGING THE BATTERY..............................................................................................................................................4
STANDARD LCD ICON CONFIGURATIONS ...................................................................................................................5
REMOTE TRANSMITTER OPERATION...........................................................................................................................6
LCD TRANSCEIVER BUTTON CONTROL...................................................................................................................... 7
Vehicle’s Status Check...................................................................................................................................................7
Temperature Check .......................................................................................................................................................7
Second Vehicle Security Operation................................................................................................................................7
Voltage Check ................................................................................................................................................................7
Melody / Vibration Mode.................................................................................................................................................7
Power Saver Mode.........................................................................................................................................................7
Button Lock Mode...........................................................................................................................................................7
CHIRP INDICATORS.........................................................................................................................................................8
PARKING LIGHT ...............................................................................................................................................................8
TABLE OF ZONE / ALARM DIAGNOTICS........................................................................................................................8
ALARM OPERATING CONDITION ...................................................................................................................................8
ACTIVE ARMING – LOCK & ARM ....................................................................................................................................8
Defective Sensor Reminder ...........................................................................................................................................8
Silent Arming ..................................................................................................................................................................9
Shock Sensor Bypass ...................................................................................................................................................9
Tilt Sensor Bypass..........................................................................................................................................................9
All Sensor Bypass...........................................................................................................................................................9
Hidden Alarm Function ...................................................................................................................................................9
PASSIVE ARMING ............................................................................................................................................................9
Passive Arming With Passive Door Locking...................................................................................................................9
Passive Arming By-Pass ................................................................................................................................................9
ACTIVE DISARMING – UNLOCK & DISARM...................................................................................................................9
Silent Disarming ...........................................................................................................................................................10
Tamper Disarming ........................................................................................................................................................10
Pathway Illumination.....................................................................................................................................................10
Two-Steps Door Unlock................................................................................................................................................10
Automatic Re-Arm ........................................................................................................................................................10
TRIGGER THE SYSTEM ................................................................................................................................................10
Noise Abatement Circuit ..............................................................................................................................................10
PANIC FUNCTION ..........................................................................................................................................................10
DISARMING WITHOUT A TRANSMITTER..................................................................................................................... 11
VALET MODE.................................................................................................................................................................. 11
Enter Valet Mode .......................................................................................................................................................... 11
Exit Valet Mode............................................................................................................................................................. 11
Remote Valet ................................................................................................................................................................ 11
CAR LOCATOR............................................................................................................................................................... 11
DRIVER PAGING / LOST & FOUND............................................................................................................................... 11
DOME LIGHT CONVENIENCE SUPERVISION ............................................................................................................. 11
IGNITION CONTROL DOOR LOCK/UNLOCK ...............................................................................................................12
TRUNK RELEASE (AUX 1) OUTPUT ............................................................................................................................12
AUX 2 TIMER CONTROL OUTPUT ...............................................................................................................................12
AUX 3 TIMER CONTROL OUTPUT................................................................................................................................12
AUX 4 TIMER CONTROL OUTPUT................................................................................................................................13
SECOND CAR OPREATION...........................................................................................................................................13
POWER ON MEMORY ...................................................................................................................................................13
STOP THE TRIGGER MELODY SOUND .......................................................................................................................13
CLEAR THE FLASHING TAMPER WARNING MESSAGE ICONS ................................................................................13
ILLUMINATE LCD DISPLAY............................................................................................................................................13
OUT OF RANGE ............................................................................................................................................................13

UM_FULL_75SL_REV_A 3
REMOTE START OPERATION
TO REMOTE START THE VEHICLE...........................................................................................................................14
PROGRAMMABLE SAFETY START ..........................................................................................................................14
RUNNING TIME EXTENDER.......................................................................................................................................15
OPERATE THE VEHICLE WHILE RUNNING FROM THE REMOTE START ...............................................................15
TEMPORARY STOP MODE ........................................................................................................................................15
TO TURN OFF THE REMOTE START........................................................................................................................15
DISABLING THE REMOTE START SYSTEM.............................................................................................................15
TIMER START OPERATION .......................................................................................................................................16
24 hour repeat with cold starting ..............................................................................................................................16
Activate Timer start on / off.......................................................................................................................................16
DAILY TIMER START..................................................................................................................................................16
Activate Daily timer start on / off...............................................................................................................................16
TURBO TIMER MODE ................................................................................................................................................16
To activate Turbo Timer Mode ..................................................................................................................................17
Cancelling Turbo Timer Mode...................................................................................................................................17
MANUAL TRANSMISSION REMOTE START FUNCTION (Reservation Mode) ........................................................17
Activating Reservation Mode....................................................................................................................................17
Cancelling Reservation Mode...................................................................................................................................18
SHUTDOWN / STARTUP DIAGNOSTICS ..................................................................................................................18
Group 1 / Group 2 ................................................................................................................................................... 18
Group 3.....................................................................................................................................................................19
LCD REMOTE CONTROL PROGRAM SETTING ......................................................................................................19
SILENCER LIMITED LIFETIME WARRANTY.............................................................................................................20

UM_FULL_75SL_REV_A 4
LCD REMOTE CONTROL TRANSCEIVER:
A. CHANGING THE BATTERY
BATTERY REPLACEMENT: SLRF752
The Two-Way remote transmitter is powered by one “AAA” Battery. When the power of the battery weakens the
icon shall be displayed on the LCD screen. When the old battery is replaced, there will be beep sounds to indicate
the power is back up on the transmitter.
BATTERY REPLACEMENT: SLRF751
The One-way remote is powered by one CR2032 Battery. To replace the battery, use a coin or
small at blade screwdriver to carefully pry apart case
Small Flat Blade
Screwdriver or Coin

UM_FULL_75SL_REV_A 5
B. STANDARD LCD ICON CONFIGURATION:
The lock icon will be displayed when
the doors are locked.
The unlock icon will be displayed when
the doors are unlocked.
Hidden Alarm Mode
The security system is armed with ahidden
alarm function (silent alarm)
Valet Mode
All alarm and remote start functions
shall be temporally off.
Door Trigger (Zone 1)
Door is illegally opened Door Ajar
Trunk Trigger (Zone 2)
Trunk is illegally opened
Trunk Ajar or
Trunk Release
Hood Trigger (Zone 3)
Hood is illegally opened. Hood Ajar
Shock Sensor Trigger (Zone 5)
No Icon = Shock Sensor Bypass
With Icon = With Shock Sensor
Icon Flashing = Shock Sensor trigger
Tilt Sensor Trigger (Zone 6)
No Icon = Tilt Sensor Bypass
With Icon = With Tilt Sensor
Icon Flashing = Tilt Sensor trigger
Ignition Trigger (Zone 4)
(Icon ash) Ignition switch was illegally
turned on.
System Trigger or Panic mode
Engine Cranking
Your vehicle engine is cranking by remote
control.
Engine Running
Your vehicle’s engine is running
Timer Control Start
Engine starts automatically every
2 or 3 hours
Display the set up Running time inter-
val 2 / 3 / 24 Hours
Temperature Control Start
Engine will start at a specied temperature Display the set up start temperature
Manual Transmission Mode 22nd Car Operation
Driver Paging
Someone is paging you from of your vehi-
cle.
Button Lock (Icon on)
Remote Transmission
You are transmitting the signal to control
unit.
In – Range Indicator
You are within the range of the remote
control.
Low Battery Power Save
Reduces battery consumption
Melody Mode Vibration Mode
Alarm Clock Parking Meter
Reminder when time is up for parking

UM_FULL_75SL_REV_A 6
C. REMOTE TRANSMITTER OPERATION:
Transmitter
Button System Function Remark
Arm & Lock Doors Press the Lock button for a half second
Silent Arm & Lock Doors Press and hold for 1.0 seconds
Panic Function Press and hold for 3 seconds to Activate or
Deactivate panic function
Car Locator Press when in Armed Mode
- Arm and Delete the
2 Stage Shock Sensor Press Twice within 3 seconds.
- Arm and Delete the
Tilt Sensor Press the button rst then Press button
- - Arm and Delete the
2 Stage Shock & Tilt Sensor
Press Twice then Press button within
3 seconds.
- Arm with Hidden Alarm Function Press the button rst then Press button
Disarm & Unlock Doors Press the Unlock button for a half second
Silent Disarm & Unlock Doors Press and hold for 1.0 seconds
- Disarm & Two Steps Door Unlock (optional) Press twice within 3 seconds
1.0sec. - Silent Disarm & Two Steps Door Unlock Press and hold the button for 1.0 seconds rst
then press button.
Trunk Release (Aux 1) Press and hold for 3 seconds
- Passive Arming By-Pass While the system is disarmed
Activate or Deactivate the Remote Start Press button once.
- Press twice if set to start safety mode.
Running Time Extender Press and hold for 2 seconds
- Timer Start Press the button rst then tap Press button.
+ Turbo Mode Press together & release.
+ Aux 2 Timer Output Press together & release.
+ Aux 3 Timer Output Press together & release.
+ Aux 4 Timer Output Press together & release
+ Switch Code for 2nd Car Operation Press together & release.
+Shutdown Diagnostic Press together & release
F
Level Setting. Press F button once.
Light up LCD indicator & Function Setting Press and hold for 1.0 seconds
LCD Remote Program Setting Press and hold for 3.0 seconds

UM_FULL_75SL_REV_A 7
D. LCD TRANSCEIVER REMOTE CONTROL:
1. Press the Fbuttons the number of times corresponding to the Level you wish to select;
the LCD will display LEVEL number ( )
2. Press the button while LEVEL number text is still on to perform the command.
Button Direct Access Fx 1 Level 1 Fx 2 Level 2 Fx 3 Level 3
Arm & Lock Arm & Bypass the Shock
Sensor
Arm & Bypass the
Tilt Sensor Hidden Alarm
1 sec. Silent Arming Vehicle’s
Status Check Temperature Check
Disarm & Unlock or
Silent Disarming Remote Valet ON / OFF Car 1 / Car 2 operation Voltage Check
Trunk Release
(Aux 1) Aux 2 Aux 3 Aux 4
Remote Start or Running
Time Extender Timer Start ON / OFF Daily Timer Start
ON / OFF
F 1 sec Melody /
Vibration Mode
Power Save Mode
ON / OFF
Button Lock
ON / OFF
Vehicle’s Status Check: Press Fbutton rst then press and hold buttons for 1 second. The LCD remote transceiver
will display the current status of the vehicle.
Temperature Check: Press Fbutton 2 times rst then press and hold buttons for 1 second. The LCD remote
transceiver will display the current Temperature of the vehicle.
Second Vehicle Security Operation: Press Fbutton 2 times rst then press buttons to enter Second Vehicle Security
Mode, Under this mode press button to select CAR 2 operation, The 2icon and display on the LCD screen or
CAR 1 operation and the 2icon will disappear and display on the LCD screen.
Voltage Check: Press Fbutton 3 times rst then press button. The LCD remote transceiver will display the
voltage condition of the vehicle.
Melody / Vibration Mode: Press F button rst then press and hold F buttons for 1 seconds until the beep conrms,
then release the button to enter Tone / Vibrating Mode, Under this mode press and hold Fbutton for 1 seconds to select
Melody Mode ( icon will display) or Vibration Mode ( icon will display) or both ( and icon will display).
Power Saver Mode: Press Fbutton 2 times rst then press and hold F buttons for 1 seconds until the beep conrms
to enter Power Saver Mode, Under this mode press and hold Fbutton for 1 seconds until the beep conrms, then release
the button to enable (The SAVE icon will display) or disable Power Save Mode(The SAVE icon will disappear). While in
Power Save Mode the LCD transmitter will not look for any incoming signals from the main unit until a button is pressed.
Button Lock Mode: Press Fbutton 3 times rst then press and hold Fbuttons for 1seconds until the beep conrms,
then release the button to enter Button Lock Mode, Under this mode press and hold Fbutton for 1 second to enable
(icon will display) or disable Button Lock Mode (The icon will disappear)., the remote control will beep/vibrate
2 times when a button is pressed indicating it is locked.
EXIT: Wait 10 seconds, or press the other buttons to leave the setting except the Fbutton.

UM_FULL_75SL_REV_A 8
E. CHIRP INDICATORS PARKING LIGHT
Chirp Function
Parking light Function
1 Chirp Arm 1 Flash Arm
2 Chirps Disarm 2 Flashes Disarm
3 Chirps Defective Reminder 3 Flashes Disarm / Triggered Warning
4 Chirps Disarm / Triggered Warning 12 Flashes Car Locator
6 Chirps Car Locator Constant On Under Remote Start
TABLE OF ZONE / ALARM DIAGNOTICS
Situation Situation LED On Duty
Zone 1 (Door Triggered) 1 ashes, break, then repeat
Zone 2 (Trunk Triggered) 2 ashes, break, then repeat
Zone 3 (Hood Triggered) 3 ashes, break, then repeat
Zone 4 (Ignition Triggered) 4 ashes, break, then repeat
Zone 5 (Shock Triggered) 5 ashes, break, then repeat
Zone 6 (tilt Triggered) 6 ashes, break, then repeat
ALARM OPERATING CONDITION
LED On Duty Siren / Horn Parking Light LED Doors Starter Dome Light
Arming 1 or 3 Chirps 1 Flash Slow
Flash Locking Disable
Disarming 2 or 4 Chirps 2 or 3 Flash-
es OFF Unlocking Turns on for
30-Seconds
Trigger Alarming Flashes Flashes
Pause Disable Flashes
Hidden Alarm Flashes Slow
Flash Disable Flashes
30 Sec. Passive Arming Fast
Flash
Panic Alarming Flashes Flashes
Car Locator 6 Chirps 12 Flashes Locking
F. ACTIVE ARMING – LOCK & ARM
1. Press the button on the transmitter.
2. The alarm arms, doors lock (if connected), and the siren chirps and parking lights ash once indicating that the
security system is now armed. The icon and beeps play to conrm. If Valet Mode* is ON, the doors lock and
the +icon and tone play on the LCD transceiver. Exit Valet Mode to arm the alarm normally.
DEFECTIVE SENSOR REMINDER: If the siren sounds 3 chirps and the defective / / icon
will display on the LCD screen, then then you have left a door, trunk, or hood lid ajar and the defective icon
will display onthe LCD screen.

UM_FULL_75SL_REV_A 9
SILENT ARMING: Press and hold the transmitter buttons for 1.0 second. This will arm your security system
without a chirp. Arm conrmation will be through the vehicles parking lights only.
SHOCK SENSOR BY-PASS: Press the button two times within 5 seconds will arm the security system and bypass
warn-away and shock sensor and the shock sensor icon will disappear on the LCD screen.
Note: The bypass feature is programmed to activate for one arming cycle only. The security system will return to
normal operation during the next arming cycle.
TILT SENSOR BY-PASS: Press the button rst then press button within 3 seconds will arm the security system
and by-pass the tilt sensor and the tilt sensor icon will disappear on the LCD screen.
ALL SENSOR BYPASS: Press button 2 times then release the button and press button. It will arm the security
system and bypass all sensors, the icon and icon will all disappear on the LCD screen.
HIDDEN ALARM FUNCTION: The security system will arm and with “Hidden Alarm Function”, the siren / horn will be
silenced even if the sensor is triggered in the armed mode. Alarm indication will only appear on the LCD Transmitter.
Press the button rst. Within 3 seconds press the button to will Arm the security system and activate the
hidden alarm function and the hidden alarm icon will show on the LCD screen.
G. PASSIVE ARMING:
Active arming / disarming is controlled by your security system via the remote transmitter.This security system is
equipped with an optional Passive Arming feature which allows the security system to arm 30 seconds after the last
door is closed. Operation is as follows:
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will ash fast for 30 seconds. If you reopen any door / hood
/ trunk, the security system LED will stop ashing. It will begin ashing again once all vehicle entrances are closed.
3. After the 30-second time has elapsed, the security system will automatically “ARM”. The icons and beeps
play to conrm. The siren will chirp [1] time and the parking lights will ash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING: The vehicle doors will automatically lock after the passive
arming cycle has been completed.
PASSIVE ARMING BY-PASS: While the system is disarmed, press the button twice. The system will respond
with [1] chirp and LED will turn “Off”. The security system will remain in this temporary state for as long as you wish.
To exit Passive arming by-pass, press the transmitter or button and the system will return to normal status.
H. ACTIVE DISARMING – UNLOCK & DISARM
1. Press the button on the transmitter.
2. The siren will chirp twice and the parking lights will ash twice indicating that the security system is now disarmed.
The icon and beeps play to conrm. If Valet Mode* is ON, the doors unlock and the +icon and tone
play on the LCD transceiver. Exit Valet Mode to arm the alarm normally.
3. The vehicle’s doors will unlock and the dome light will turn on for 30 seconds upon disarming.
(Note: Power door locks and dome light must be installed with the security system.)
SILENT DISARMING: Press and hold the transmitter buttons for 1.0 second. This will disarm your security system.
No chirp sound will be heard and the disarm conrmation will be through the vehicles parking lights only,

UM_FULL_75SL_REV_A 10
TAMPER DISARMING: If the alarm has been triggered, upon disarm the system’s siren will chirp 4 times and the
parking lights will ash 3 times telling you the alarm has been triggered during the last armed state and the triggered
Icon will display on the LCD screen.
PATHWAY ILLUMINATION: When receiving an unlock /disarm signal, this feature will turn the parking lights
“ON” for 30 seconds and for 10 seconds upon the lock signal.
TWO-STEPS DOOR UNLOCK (Optional): This feature will independently unlock the driver’s door only
when disarming the security system.
• Pushing the button a second time within 3 seconds will disarm the security system and unlock the other doors.
• Press and hold the button for 1.0 seconds, within 3 seconds presses the button will Silent Disarm the
security system and unlock the other doors.
AUTOMATIC RE-ARM: If this feature is selected, the security system will automatically re-arm itself in
60 seconds after disarming with remote transmitter. Automatic rearm will cancel if any door is opened
before the 60 seconds timer has elapsed.
I. TRIGGER THE SYSTEM:
When armed, your vehicle is protected as follows:
Light impact will trigger the warn-away signal. Heavy impacts / Doors open / Trunk open / Hood
open / Turn on the ignition key / lift the vehicle will trigger the programmed sequence and the trigger
icon will ash the icon and trigger zone fault report will display on the LCD screen. The starter disable relay
(if installed) prevents the vehicle’s starter from cranking. The siren, horn, parking lights, and dome light will turn on for
30 seconds, alerting of an intrusion. It will then stop, automatic reset and re-arm. If any one of the sensors or detectors
is still active, the alarm system will sound a maximum of 3 times. Each time is a 30 second cycle.
NOISE ABATEMENT CIRCUIT: Your system has a “Noise Abatement Circuit”. It prevents annoying repetitive trigger
sequences due to faulty door pin switches or environmental conditions such as thunder, jackhammers airport noise, etc.
Here’s how “Noise Abatement Circuit” works: The alarm triggers ve times. Each time, It’s all shock sensor triggers
the alarm; the “Noise Abatement Circuit” will interpret this pattern of triggers as a false alarm. After the fth trigger,
the “Noise Abatement Circuit” ignores, or bypasses the shock sensor until a different sensor or switch is triggered.
“Noise Abatement Circuit” covers doors (Trunk / Hood / Tilt Sensor / Ignition Switch) differently: If the alarm is
triggered by an open door for three full cycles, the doors will be bypassed until the trigger ceases.
J. PANIC FUNCTION:
Press and hold the button for 3 seconds until the beep conrms and then release the button to activate the
personal protection alarm and the icon will display on the LCD screen. During panic mode, the normal function of
the transmitter buttons will be suspended. The transmitter and buttons can be used to lock and unlock the door
(if the option is installed). To stop the alarm, press and hold the button on the transmitter again for 3 seconds. The
system will automatically stop after 30 seconds.

UM_FULL_75SL_REV_A 11
K. DISARMING WITHOUT A TRANSMITTER
Number of presses ___
1. Turn the ignition on.
2. Press and release the button on the valet switch the correct number of times (the default is one press).
3. After a few seconds, the siren output ceases, and the system is disarmed.
L. VALET MODE:
When servicing or loaning your vehicle to others, the system should be placed in Valet Mode. Valet Mode prevents the
system from remote starting and disables all alarm functions.
Enter Valet Mode: (Manual)
a). Under disarm mode, turn the ignition to “ON/ OFF/ ON” position.
b). Press and hold valet switch for 2 seconds until the LED turns “ON” solid and icon will show on the LCD.
The LED will remain on as long as the system is in Valet Mode.
Exit Valet Mode:
a). Turn ignition “ON/ OFF/ ON”.
b). Push and hold the valet switch for 2 seconds. The LED will turn off indicating the system is exiting the ValetMode.
Enter Valet Mode: (Using the remote control)
a). Under disarm mode.
b). Tap the F button 1 time, and nally tap the button. The parking lights will ash once, the remote will read “Valet
On” and icon will show on the LCD.
Exit: Repeat this process to exit valet mode. The parking lights will ash twice, remote read “Valet Off”
and icon will disappear conrming valet mode is disabled.
M. CAR LOCATOR:
Under armed mode, press the button to activate the car locator function. The siren will chirp 6 times.
The parking light will ash 12 times, assisting you in easily locating your car.
N. DRIVER PAGING / LOST & FOUND. (For two-way transceiver operation only)
This feature is useful in the event that someone wants to page the driver of a parked vehicle or someone
cannot nd his LCD remote transceiver.
Under the ignition switch “OFF” condition, press and hold the valet switch for 2 seconds to page the driver.
One chirp sound is emitted from the vehicle, a paging melody will continue to sound and the icon will
ash on the LCD screen.
O. DOME LIGHT CONVENIENCE SUPERVISION
The alarm has a unique feature that will turn on your vehicle dome light as follows:
1. Upon disarming, the interior light will remain on for 30 seconds.
2. If the vehicle is intruded, the interior light will ash for the same duration as the siren.
Note: Turning on the ignition switch or arming the alarm will turn off the dome light.

UM_FULL_75SL_REV_A 12
P. IGNITION CONTROL DOOR LOCK/UNLOCK.
If the vehicles door locks have been interfaced to the security system, the system will automatically
lock the vehicle’s doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when
the ignition is turned “OFF”.
Q. TRUNK RELEASE OUTPUT. (AUX 1 / CH 1)
Press and hold the button on the transmitter for 3 seconds until the beep conrms and then release
the button to remotely control the trunk release and the icon will show on LCD screen.Aux 1 is a
user-programmable timer output. You may program the built-in timer to send a ground signal for any
time duration from 1 second to 90 seconds. For instance, this timer output may be used to turn on the
headlights, power windows or sunroof.
Programmable Output: Trunk (1 second pulse) / Aux 1 Latch / Aux 1 Latch Reset with Ignition / Aux 1 Flex
(Aux 1 Control by Remote / Control by Arm / Control by Disarm / Control by Arm & Disarm / Control by Remote Start)
Latch: when the Aux 1 command is received the output will turn ON and remain ON and the text and tones
play to conrm until the command is received again and text will be displayed on the LCD screen.
Latch/Reset/Ignition: when the Aux 1 command is received the wire will turn ON and remain ON until the ignition is
turned ON & OFF or the command is received again and text will be displayed on the LCD screen.
Flex: when the Aux 1 command is received, the output will turn ON for the programmed time duration (default 1sec.).
Aux 1 (CH 1) Output Control:
1. Control by Remote: This option allows Aux 1 (output time based on feature 2-13) to be triggered by remote
control command and press and hold buttons for 3 seconds until the beep conrms and then release
the button to activate Aux 1function and the text and tones play to conrm.
2. Control by Arm: The Aux 1 output will activate for the Arm command. If you send a second lock/arm
command it will not trigger Again.
3. Control by Disarm: The Aux 1 output will activate for the Disarm command. if the vehicle is already in the
unlocked/disarmed state and you send a second unlock/disarm command it will not trigger the output
4. Control by Arm and Disarm: the Aux 1 output will activate for the Arm & Disarm commands.
5. Control by Remote Start: the Aux 1 output will activate for any Remote Start activation.
R. AUX 2 (CH 2) TIMER CONTROL OUTPUT. (Optional Feature)
Press F button rst then press button or press buttons +simultaneously to activate Aux 2 function and
text and tones play to conrm. Aux 2 is a user-programmable timer output.
Programmable Output: Aux 2 Latch / Aux 2 Latch Reset with Ignition / Aux 2 Flex
(Aux 2 Control by Remote / Control by Arm / Control by Disarm / Control by Arm & Disarm / Control by Remote Start)
S. AUX 3 (CH 3) TIMER CONTROL OUTPUT. (Optional Feature)
Press Fbutton 2 times rst then press button or press the buttons +simultaneously to activate Aux 2
function and. the text and tones play to conrm. Aux 3 is a user-programmable timer output.
Programmable Output: Aux 3 Latch / Aux 3 Latch Reset with Ignition / Aux 3 Flex
(Aux 3 Control by Remote / Control by Arm / Control by Disarm / Control by Arm & Disarm / Control by Remote Start)

UM_FULL_75SL_REV_A 13
T. AUX 4 (CH 4) TIMER CONTROL OUTPUT. (Optional Feature)
Press Fbutton 3 times rst then press button or press the buttons +simultaneously to activate
Aux 4 function and. the text and tones play to conrm. Aux 4 is a user-programmable timer output.
Programmable Output: Aux 4 Latch / Aux 4 Latch Reset with Ignition / Aux 4 Flex /
(Aux 4 Control by Remote / Control by Arm / Control by Disarm / Control by Arm & Disarm / Control by Remote Start)
U. SECOND VEHICLE SECURITY OPERATION.
You can be utilized to control a second vehicle’s security system. To program the remote control transmitter
to a second vehicle, Press and hold the + buttons 2 seconds until the beep conrms and then release
the button to select car 2 or car 1 operation.
4 Button Remote Transmitter:
For Car 2: When the LED start 2 pause ash then release buttons.
For Car 1: When the LED start 1 pause ash then release the buttons.
LCD Remote Transceiver:
For Car 2: When 2icon and the text show on the LCD display then release the buttons.
Under Car 2 mode, the 2 icon will ash.
For Car 1: When 2icon is disappear and the text show on the LCD display then release the buttons
V. POWER ON MEMORY:
This security system is equipped with circuitry that will allow the unit to remember its alarm state
if the power is lost and then reconnected.
W. CLEAR THE FLASHING TAMPER WARNING MESSAGE ICONS:
The ashing warning message icons in the LCD display will clear and reset when the transmitter
is used to lock the vehicle. Also, Locking then Unlocking the system will clear the ashing icons.
X. STOP THE TRIGGER MELODY SOUND:
While triggering the alarm, the LCD screen will alert the user through a melody sound and a ashing trigger icon.
Press any button on the LCD remote transmitter to stop the melody sound only.
Y. ILLUMINATE LCD DISPLAY:
Press and hold the Fbutton for 1 second and the LCD indicator will light up.
Z. OUT OF REMOTE CONTROL RANGE:
If the icon disappears to indicate the remote failed to receive a command conrmation.

UM_FULL_75SL_REV_A 14
WARNINGS
As with any product that performs automatic functions, there are certain safety precautions
that you must practice and be aware of.
1. Keep the transmitter out of children’s reach.
2. Do not leave anyone in the vehicle while running on remote control.
3. Alert servicing personnel that the vehicle can be started automatically.
4. Do not start the vehicle by remote while it’s in an enclosed area or garage.
5. Always apply the parking brake and lock the vehicle as you exit the vehicle.
6. The vehicle windows must be rolled up.
7. Should the unit malfunction, disconnect the fuse until the problem is corrected.
8. The use and operation of this system is the sole responsibility of the operator.
9. Some areas may have local ordinances that prohibit leaving a vehicle running on public streets.
10. It is not safe to remote start the vehicle if the vehicle is parked on a steep incline.
REMOTE START OPERATION
A. To Remote Start The Vehicle
When you want to start your vehicle:
1. Press the button once on the transmitter.
2. The parking light will activate to indicate the remote start has received the signal
and the icon will scroll to indicate that the engine is starting.
3. After a couple of seconds with the engine running, the icon will show on the LCD screen,
the parking lights will turn on and the climate controls will activate to adjust the vehicle’s interior
temperature to your preset setting. While the vehicle is running, the icon, the run time start countdown
text and tones play to conrm. The countdown timer based on the 3, 10, 20, 30 or 45 minute run time
set up by your installation center.)
4. The vehicle will run for a programmable 3 to 45 minute cycle before shutting down. When the countdown
timer is off or press button, the system will be shut down, and the icon will disappear and tones
play on the LCD screen.
5. The vehicle refused to start running after 3unsuccessful attempts.
6. If Remote Start fails to start, the parking light will fast ashing 4 times and text
and a fault tone play on the LCD transceiver.
B. Programmable Safety Start
By default, your Silencer remote starter is programmed to start/stop after pressing the button 1 time. This default
setting can be re-programmed to require 2 presses - . This setting is known as “Child Safety Mode”.
Contact your installer to reprogram this feature if needed.

UM_FULL_75SL_REV_A 15
C. Running Time Extender
User Programmable Run Time / Run Time Extension. The system has the ability to allow the user to extend the time
the vehicle will be running under control of the remote start. This will only extend the run time back to the current run
time setting during the current remote start cycle. If your system is set to run 20 minutes and the time remaining is
4 minutes, extending the run time will reset the countdown timer to 20 minutes and your vehicle will continue to run
for another 20 minutes. Follow the steps below to extend the vehicle’s run time.
1. The remote start must already be active.
2. Press and hold the button for 2 seconds until the beep conrms and then release the button.
3. The system will chirp 1 time and ash the parking lights 4 times and the run time Restart the
countdown text and tones play to conrm that the run time has been reset and will
indicate a countdown timer based on the 3, 10, 20, 30 or 45 minute run time.
4. The runtime extender only available when remote start is ON.
D. Operate The Vehicle While Running From The Remote Start
To operate the vehicle while the engine is running from the remote start:
1. Insert the ignition key and turn it to “ON” (not the start) position
2. Press the brake pedal.
Note: If the brake pedal is pressed before the key is in the “ON” position, the engine will shut down.
E. Temporary Stop Mode:
This mode allows the vehicle to remain running after the key has been removed from the ignition.
This feature is useful for occasions when you wish to exit and lock the vehicle for short periods of
time but would like to leave the motor running and the climate control on.
1. While the vehicle is running, place the transmission in PARK, set the emergency / parking brake.
2. With your foot off the brake pedal, press the button once, the parking lights will turn on and the run time start
countdown text and tones play to conrm that the system has entered Temporary Stop Mode.
3. Remove the keys from the ignition and exit the vehicle. Press the button to lock the vehicle’s doors if desired.
Note: Do not leave children or animals unattended in the vehicle when using the temporary stop feature.
F. To Turn Off The Remote Start
When the engine is running (by remote start) and you want to stop it:
1. Press the button once on the remote transmitter under the remote start mode.
2. Move the optional remote start enable toggle switch to the “OFF” position. (If installed)
3. Press the brake pedal.
4. Pull down the hand brake. (For Manual Transmission Vehicle and Turbo Timer Mode).
The vehicle will shut down and turn off the parking light and the icon will disappear and
tones play to conrm the engine has stopped.

UM_FULL_75SL_REV_A 16
G. Disabling The Remote Start System: (If Installed)
This feature allows your system’s remote start unit to be temporarily disabled to prevent the vehicle from being
remote started accidentally. This feature is useful if the vehicle is being serviced or stored in an enclosed area.
To disable the remote start, move the optional remote start enable toggle switch to the “OFF” position.
H. Timer Start Operation
This feature is designed to allow the user to have the 75SL automatically remote start at the end of a selected
timed cycle. (Runtime interval based on feature 3-05 option setting, and temperature start setting based on
feature 3-012 and 3-13) It also be controlled by the thermistor so it will start at a specied temperature at the
end of the timed cycle. The running time interval and start temperature will display on 2 ways LCD remote
to conrm temperature timer start is set.
24 hour repeat with cold starting:
This option is designed to monitor the temperature 24 hrs. After timer mode is set (see feature 3-05) and start if it
is at or below the preset cold start temperature (see feature 3-12). This process will continue until the user manually
starts or remote starts the vehicle. 24 hrs. digital will display on 2 ways LCD remote to conrm 24 hour repeat with
cold starting is set.
Activate Timer start on / off
Depress F button rst then press button or Press the button rst, within 2 seconds presses the button to
activate timer start (or if ON, deactivates). A chirp from siren and the parking light ashes 3 times and the timer start
icon or the timer start with temperature icon and the or /or text and tone play on the
LCD transceiver.
Note: For Timer Start and Daily Timer Start:
1. This will be repeated in 24 hours.
2. Manually starts or remote starts the vehicle will cancel the timer start.
3. 2 chirps from siren indicate fail to setting and the text and tone play on the LCD transceiver.
IMPORTANT: Timer Start and Daily Timer Start should be used only in open areas, never start
and run the vehicle in on enclosed space as a garage or carport.
Contact your installer to reprogram this feature if needed.
I. Daily Timer Start:
This option will allow the user to set a predetermined time to remote start on the 2 way LCD remote. Sets the time
which you would like the start the vehicle rst (predetermined time based on LCD programming 2 setting)
Note: it is important that the remote time is as accurate as possible when activating the timer mode to ensure
that it will start at the desired time.
Activate Daily timer start on / off:
Depress F button 2 times rst then press button (or if ON, deactivates). The parking light ashes
5 times and the icon and the text and tone play on the LCD transceiver to conrm
activates predetermined time start. The vehicle is now programmed to start at the same time of the next day.
Repeat the same step to turn off daily timer start mode.

UM_FULL_75SL_REV_A 17
J. Turbo Timer Mode
The built in turbo timer keeps the vehicle’s engine running for either 1, 3, or 5 minutes, after the vehicle key
has been removed from the ignition. This feature will keep oil running through the turbo system to allow
for appropriate cooling time.
To activate:
Step 1: While the vehicle is running, place the transmission in neutral, set the emergency / parking brake.
Step 2: With your foot off the brake pedal, press buttons +simultaneously and the parking lights will turn on.
Remove the key from the vehicle’s ignition. The vehicle’s engine should remain running even after the key has been
removed If the vehicle does not remain running visit your local authorized dealer for service.
Step 3: Exit the vehicle and close the door. Press the transmitter button, the vehicle’s doors will lock/arm and then
engine will keep runs for the turbo runtime and the run time start countdown text and tones play to conrm.
Cancelling Turbo Timer Mode:
The system will exit Turbo Timer Mode if any of the following occur:
• You did not activate the parking brake prior to turning off the ignition.
• You pressed the foot brake after the key was removed from the ignition
• You released the parking brake after the key was removed from the ignition.
• You entered valet mode, opened the vehicle’s door, hood, trunk or set off the alarm.
•Press buttons + simultaneously to turn off turbo mode.
Note: Turbo Timer must be turned on by an authorized dealer.
K. Manual Transmission Remote Start Function (Reservation Mode)
In order to remote start a manual transmission vehicle, the system must rst be set in Reservation Mode.
Reservation Mode must be set each and every time you want to remote start a manual transmission vehicle.
The purpose of Reservation Mode is to leave the transmission in neutral before exiting the vehicle.
IMPORANT:
• The vehicle’s door pins must be in working order.
• The transmission must be left in the neutral position.
•The optional start toggle switch must be in ON position (if install)
• The vehicle’s windows must be rolled up.
• Do not install this remote start on a manual transmission vehicle that has a convertible or removable top.
• Do not set reservation mode or remote start with people in the vehicle.
Activating Reservation Mode
Step 1: While the vehicle is running, place the transmission in neutral, set the emergency / parking brake.
Step 2: With your foot off the brake pedal, press and hold button until the led ash then release the button, the
parking lights will turn on and remove the key from the vehicle’s ignition. The vehicle’s engine should remain running
even after the key has been removed. If the vehicle does not remain running visit your local authorized dealer for service.
Step 3: Exit the vehicle and close the door. Press the transmitter button to lock/arm and then engine will shut down
and icon and the beeps will play to conrm. If the vehicle’s engine does not shut off, your door trigger may be
functioning improperly. Do not use the remote start feature and take your vehicle to a local authorized dealer for service.
Note: If Reservation Mode cannot be set, text will display and the beeps play to conrm.

UM_FULL_75SL_REV_A 18
Cancelling Reservation Mode
Reservation mode will be cancelled for the following reasons;
• You did not activate the parking brake prior to turning off the ignition.
• You pressed the foot brake after the key was removed from the ignition.
• You released the parking brake after the key was removed from the ignition.
•You entered valet mode, opened the vehicle’s door, hood, trunk or set off the alarm.
L. Shutdown Diagnostics:
The unit has the ability to report the cause of the last shutdown of the remote start system.
Press Buttons +simultaneously.
4 Button Remote Transmitter: The parking light and chirps will report the reason of the system last shutdown by
ashing in the following grouped patterns,
LCD Remote Transceiver: The LCD display on the 2-way remote will report the reason of the last shutdown. And
the text and a fault tone play to conrm.
GROUP 1 (One Flash of Parking Light )
Chirps Shutdown Mode Solution
1Hood Open • Close the hood.
• Check 24-pin White/Black wire connection.
2Optional Enable Switch OFF or Black/
White must have a ground
• Check 24-pin Black/White wire connection.
• Move the Enable Toggle Switch to “ON” position. (If installed.)
• Move the gear selector to “Park”/ “NEUTRAL” position
3Foot Brake on • Check 24-pin White/Violet wire connection
• Release Foot Brake.
4System is in Valet Mode Exit the Valet mode
5
Hi Voltage
(Voltage Checking Type) Set the “Feature 3-02 to “Low Level”
Low or No RPM
(Tachometer Checking Type)
• Check 24-pin White/ Red wire connection
• Set the “Feature 3-02 to “Hi Level”
• Re-learning the RPM
6The engine has run successfully but is
still starting (Tachometer Checking Type) •Set the “Feature 3-02 to “Low Level”
GROUP 2 (Two Flash of Parking Light )
Chirps Shutdown Mode Solution
1Over-Rev Shutdown
2Running Time expired
3Transmitter Shutdown
4Wait-to-start input timed out (For Diesel Engine Only)
5Alarm triggered

UM_FULL_75SL_REV_A 19
GROUP 3 (Three Flash of Parking Light) for Manual transmission vehicle.
Chirps Shutdown Mode Solution
1Manual transmission mode is enable
and not initialized
Follow the manual transmission setup steps
(page 17 of the user manual)
2Door Open • Close the Door.
• Check 24-pin Green or Violet wire connection.
3(-) Parking Brake / E-Brake In Shutdown • Set the Parking Brake / E-brake Brake.
• Check 24-pin White/Blue wire connection.
4No RPM or The vehicle’s clutch bypasses fail.
• Check 24-pin Gray/Black wire connection
• The vehicle’s clutch must be temporarily bypassed
• Re-learning the RPM
5Accelerometer trigger • Move the gearshift lever to the neutral gear
Note: The Accelerometer monitors sudden movement forward or backward during the remote start process.
It will Stop Remote Start after detect forward or backward movement
M. LCD Remote Control Program Setting
Enter:
1. Press and hold the Fbutton for 3 seconds until the Display text and a tone play to conrm is heard and then release.
2. Press F button conrm the selection and move to the next setting, and the “Display” text and a tone play to conrm.
Exit:
Press and hold the Fbutton for 3 seconds until 2 beeps are heard and then release.
Feature Display button button button Function / Description
1Time Adjusts
Hour
Adjusts
Minute Sets the time on your remote
2Daily timer start
ash
Adjusts
Hour
Adjusts
Minute
Sets the time at which you want your
vehicle to start every day.
3Alarm Clock
Time ash
Adjusts
Hour
Adjusts
Minute On/Off Sets the time which you would like the
remote alarm clock to alert you.
4Parking
Meter Timer ash
Adjusts
Hour
Adjusts
Minute On/Off Sets the time which you would like the
parking meter timer to alert you.
5Backlight delay
or turn off 5 / 10 / OFF 5 sec 10 sec Backlight
Turn off Sets the Backlight of LCD
6
Car Icon
Illumination icon
displayed or
not
icon
Displayed Not icon displayed when required by
the 2-way information system.
7Temperature F or C F C Change the temperature readout from
Fahrenheit or Celsius

UM_FULL_75SL_REV_A 20
SILENCER LIMITED LIFETIME WARRANTY
Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original purchaser, repair, replace or refund the retail
sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found
defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the specic
product. This warranty and Magnadyne Corporation or its authorized agents obligations, hereunder do not apply where the product was: damaged
while in the possession of the consumer, subjected to unreasonable or unintended use, not reasonably maintained, utilized in commercial or
industrial operation, or serviced by anyone other than Magnadyne Corporation or its authorized agent, or where the warning seal on the product
is broken or the power plugs or wires are detached from the unit. Magnadyne Corporation or any of its authorized agents do not assume any
labor costs for the removal and reinstallation of any product found to be defective, or the cost of transportation to Magnadyne Corporation or its
authorized agents. Such costs are the sole responsibility of the purchaser.
This warranty does not cover the cabinet, appearance items, normal wear and tear or accessories used in connection with the product resulting
from improper installation, alteration, accident, misuse, abuse or acts of nature.
This Limited Life Time Warranty applies only to the receiver section of the security system. Neither the siren, transmitters, wire harness or any
accessory item added to or used with a Remote Mobile security system are covered by this Limited Life Time Warranty. Sirens, transmitters, wire
harness or any accessory item are covered by our standard 12 month limited warranty.
Magnadyne Corporation or its authorized agents shall not be liable to anyone for consequential or incidental damages or claims that may arise
due to failure of product to operate properly except those accorded by law. Magnadyne’s or its authorized agents liability to the repair, replacement
of the product as stated above if all conditions of the warranty are met. No expressed warranty or implied warranty is given except those set
forth herein. Magnadyne does not warrant or guarantee against break in damage or the theft of the vehicle in part or whole, or against the loss
or damage to the contents of any vehicle in which a security system is installed. Magnadyne security systems are only a deterrent against
possible theft.
This warranty extends only to the original purchaser of the product and for the vehicle in which it was originally installed. This warranty is not
transferable or assignable to any person or vehicle. Defective merchandise should be returned to the original point of purchase or secondly to
Magnadyne Corporation, 1111 W. Victoria Street, Compton, CA 90220. A return authorization must be obtained before sending, or merchandise
may be refused.
Warning: Some batteries may contain Perchlorate
What is Perchlorate? Perchlorate is both a naturally occurring and manmade contaminant increasingly found in groundwater, surface water and soil.
Most perchlorate manufactured in the U.S. is used as an ingredient in solid fuel for rockets and missiles. In addition, perchlorate-based chemicals
are also used in the construction of highway safety ares, reworks, pyrotechnics, explosives, common batteries, and automobile restraint systems.
Perchlorate contamination has been reported in at least 20 states. Perchlorate greatly impacts human health by interfering with iodide uptake into
the thyroid gland. In adults, the thyroid gland helps regulate the metabolism by releasing hormones, while in children; the thyroid helps in proper
development. Perchlorate is becoming a serious threat to human health and water resources. “Perchlorate Material – Special handling may apply.”
For more information, go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/
Table of contents
Other Silencer Remote Starter manuals

Silencer
Silencer SL-52FM User manual

Silencer
Silencer 65SL User manual

Silencer
Silencer 56SL User manual

Silencer
Silencer 53SL User manual

Silencer
Silencer SL- 51 User manual

Silencer
Silencer SL-51X User manual

Silencer
Silencer 55SL User manual

Silencer
Silencer 55SL User manual

Silencer
Silencer SL-51X User manual
Popular Remote Starter manuals by other brands

Audiovox
Audiovox AA-RS10CS owner's manual

CompuSTAR
CompuSTAR 2WT11R-SS Quick start card

York Survey Supply
York Survey Supply Jump Start Power & Air Station operating instructions

Fortin
Fortin FMH SERIES user manual

Schumacher Electric
Schumacher Electric INSTANT POWER IP-1875C owner's manual

ULTIMATE SPEED
ULTIMATE SPEED 354273 2010 Operation and safety notes