Silencer 56SL User manual

UM_FULL_56SL_REV_A 2
Contents
CHANGING THE BATTERY............................................................................................................................................ 3
STANDARD LCD ICON CONFIGURATIONS ................................................................................................................. 4
LCD TRANSCEIVER REMOTE CONTROL OPERATION .............................................................................................. 4
Vehicle’s Status Check ................................................................................................................................................ 4
Second Vehicle Security Operation ............................................................................................................................. 4
Voltage Check.............................................................................................................................................................. 4
Melody / Vibration Mode .............................................................................................................................................. 4
Power Saver Mode ...................................................................................................................................................... 5
Button Lock Mode........................................................................................................................................................ 5
REMOTE TRANSMITTER OPERATION......................................................................................................................... 5
CHIRP INDICATORS....................................................................................................................................................... 6
PARKING LIGHT ............................................................................................................................................................. 6
LOCK............................................................................................................................................................................... 6
Silent Locking............................................................................................................................................................... 6
UNLOCK..........................................................................................................................................................................6
Silent Unlocking ........................................................................................................................................................... 6
Pathway Illumination.................................................................................................................................................... 6
Two-Steps Door Unlock ............................................................................................................................................... 6
PANIC FUNCTION. ......................................................................................................................................................... 6
VALET MODE ................................................................................................................................................................. 7
Enter Valet Mode ......................................................................................................................................................... 7
Exit Valet Mode ............................................................................................................................................................ 7
Remote Valet ............................................................................................................................................................... 7
CAR LOCATOR............................................................................................................................................................... 7
DRIVER PAGING / LOST & FOUND............................................................................................................................... 7
DOME LIGHT CONVENIENCE SUPERVISION ............................................................................................................. 7
IGNITION CONTROL DOOR LOCK/UNLOCK ............................................................................................................... 7
TRUNK RELEASE (AUX 1) OUTPUT............................................................................................................................. 8
AUX 2 TIMER CONTROL OUTPUT................................................................................................................................ 8
SECOND CAR OPERATION........................................................................................................................................... 9
CLEAR THE FLASHING TAMPER WARNING MESSAGE ICONS ................................................................................ 9
STOP THE MELODY SOUND......................................................................................................................................... 9
ILLUMINATE LCD DISPLAY............................................................................................................................................9
OUT OF REMOTE COTROL RANGE............................................................................................................................. 9
REMOTE START OPERATION
TO REMOTE START THE VEHICLE............................................................................................................................. 10
PROGRAMMABLE SAFETY START ............................................................................................................................ 10
RUNNING TIME EXTENDER......................................................................................................................................... 11
OPERATE THE VEHICLE WHILE RUNNING FROM THE REMOTE START ................................................................. 11
TEMPORARY STOP MODE .......................................................................................................................................... 11
TO TURN OFF THE REMOTE START.......................................................................................................................... 11
DISABLING THE REMOTE START SYSTEM............................................................................................................... 12
TIMER START OPERATION ......................................................................................................................................... 12
Activate Timer start on / off............................................................................................................................................ 12
DAILY TIMER START ................................................................................................................................................ 12
Activate Daily Timer start ........................................................................................................................................... 12
TURBO TIMER MODE .................................................................................................................................................. 13
To activate Turbo Timer Mode.................................................................................................................................... 13
Cancelling Turbo Timer Mode........................................................................................................................................ 13
SHUTDOWN / STARTUP DIAGNOSTICS .................................................................................................................... 13
Group 1...................................................................................................................................................................... 14
Group 2...................................................................................................................................................................... 14
LCD REMOTE CONTROL PROGRAM SETTING ........................................................................................................ 15

UM_FULL_56SL_REV_A 3
A. CHANGING THE BATTERY
BATTERY REPLACEMENT: SLRF90A
The Two-Way remote transmitter is powered by one “AAA” Battery. When the power of the battery weakens
A icon shall be displayed on the LCD screen. When the old battery is replaced, there will be beep sounds
to indicate the power is back up on the transmitter.
BATTERY REPLACEMENT: SLRF751
The One-way remote is powered by one CR2032 Battery. To replace battery use a coin or small at blade
screwdriver to carefully pry apart case
Small Flat Blade
Screwdriver or Coin

UM_FULL_56SL_REV_A 4
B. STANDARD LCD ICON CONFIGURATIONS:
The lock icon will be displayed when
the door are locked.
The unlock icon will be displayed when the
door are unlocked.
System trigger Valet Mode
All the function shall be temporally on hold.
Trunk Release Panic mode
Engine Cranking
Your vehicle engine cranking by remote control.
Engine Running
Your vehicle’s engine is running
Timer Control Start
Engine starts automatically every
2 or 3 hours
Driver paging
22nd Car Operation Button Lock (Icon on)
Remote Transmission
You are transmitting the signal to control unit.
In – Range Indicator
You are within the range of the remote
control.
Low Battery Power Save
Melody Mode Vibration Mode
Alarm Clock Parking Meter
Reminder when time is up for parking
C. LCD TRANSCEIVER REMOTE CONTROL:
1. Press the Fbuttons the number of times corresponding to the Level you wish to select;
the LCD will display LEVEL number ( )
2. Press the button while LEVEL number text is still on to perform the command.
Button Direct Access Fx 1 Level 1 Fx 2 Level 2 Fx 3 Level 3
1.0 sec. Silent Arming Vehicle’s
Status Check
Disarm & Unlock or
Silent Disarming Remote Valet ON / OFF Car 1 / Car 2 operation Voltage Check
Trunk Release
(Aux 1) Aux 2
Remote Start or Running
Time Extender Timer Start ON / OFF Daily Timer Start ON / OFF
F 1 sec Melody /
Vibration Mode
Power Save Mode
ON / OFF
Button Lock
ON / OFF
Vehicle’s Status Check: Press Fbutton rst then press and hold buttons for 1 second and release.
The LCD remote transceiver will display the current status of the vehicle.
Second Vehicle Security Operation: Press Fbutton 2 times rst then press and release button to enter Second
Vehicle Security Mode, Under this mode press button to select CAR 2 operation, The 2icon and display
on the LCD screen or CAR 1 operation and the 2icon will disappear and display on the LCD screen.
Voltage Check: Press Fbutton 3 times rst then press and release button. The LCD remote transceiver will display
the voltage condition of the vehicle.
Melody / Vibration Mode: Press F button rst then press and hold F buttons for 1 seconds until the beep conrms,
then release the button to enter Melody / Vibrating Mode, Under this mode press and hold Fbutton for 1 seconds to
select Melody Mode icon will display) or Vibration Mode icon will display) or both and icon will display).

UM_FULL_56SL_REV_A 5
Power Saver Mode: Press Fbutton 2 times rst then press and hold F buttons for 1 seconds until the beep conrms to
enter Power Saver Mode, Under this mode press and hold Fbutton for 1 seconds until the beep conrms, then release
the button to enable (The SAVE icon will display) or disable Power Save Mode (The SAVE icon will disappear).
While in Power Save Mode the LCD transmitter will not look for any incoming signals from main unit until a button is pressed.
Button Lock Mode: Press Fbutton 3 times rst then press and hold Fbuttons for 1seconds until the beep conrms,
then release the button to enter Button Lock Mode, Under this mode press and hold Fbutton for 1 second to enable
(icon will display) or disable Button Lock Mode (The icon will disappear)., the remote control will beep/vibrate
2 times when a button is pressed indicating it is locked.
EXIT: Wait 10 seconds, or press the other buttons to leave the setting except the Fbutton.
D. REMOTE TRANSMITTER OPERATION:
Transmitter
Button System Function Remark
Lock Doors Tap the Lock button for a half second
Silent Lock Doors Press and hold for 1.0 seconds
Panic Function Press and hold for 3 seconds to Activate or
Deactivate panic function
Car Locator Press when the system Locked
Unlock Doors Tap the Unlock button for a half second
Silent Unlock Doors Press and hold for 1.0 seconds
- Two Steps Door Unlock (optional) Press twice within 3 seconds
1.0sec. - Silent Two Steps Door Unlock Press and hold the button for 1.0 seconds
rst then press button.
Trunk Release (Aux 1) Press and hold for 3 seconds
Activate or Deactivate the Remote Start Press button once.
- Press twice if set to start safety mode.
Running Time Extender Press and hold for 2 seconds
- Timer Start Tap the button rst then tap button.
+ Turbo Mode Press together & release.
+ Aux 2 Timer Output Press together & release.
+ Switch Code for 2nd Car Operation Press together & release.
+ Shutdown Diagnostic Press together & release
F
Level Setting.
Light up he LCD indicator and Function Setting Press and hold for 1 second
LCD Remote Programming Setting Press and hold for 3 seconds

UM_FULL_56SL_REV_A 6
E. CHIRP INDICATION PARKING LIGHT
Chirp Function Parking light Function
1 Chirp Lock 1 Flash Lock
2 Chirps Unlock 2 Flashes Unlock
6 Chirps Car Locator 12 Flashes Car Locator
Constant On Under Remote Start
F. LOCK
1. Press the button on the transmitter.
2. The system will lock the doors (if connected), and the horn chirps and parking lights ash once indicating
that the keyless entry system is now locked. The icon and beeps play to conrm. If Valet Mode* is ON,
the doors lock and the +icon and tone play on the LCD transceiver.
SILENT LOCKING: Press and hold the transmitter buttons for 1.0 second. The system will lock the doors.
No chirp sound will be heard and the lock conrmation will be through the vehicles parking lights only.
G. UNLOCK
1. Press the button on the transmitter.
2. The horn will chirp twice and the parking lights will ash twice indicating that the system is now unlocked.
The icon and beeps play to conrm. If Valet Mode* is ON, the doors unlock and the +icon
and tone play on the LCD transceiver.
3. The vehicle’s doors will unlock and the dome light will turn on for 30 seconds upon unlocking.
(Note: Power door locks and dome light must be installed with the keyless entry system.)
SILENT UNLOCKING:Press and hold the transmitter buttons for 1.0 second. This will unlock your doors.
No chirp sound will be heard and the unlock conrmation will be through the vehicles parking lights only,
PATHWAY ILLUMINATION: When receiving an unlock signal, this feature will turn the parking lights “ON” for 30
seconds and for 10 seconds upon the lock signal. (See feature bank 2-04)
TWO-STEPS DOOR UNLOCK (Optional): This feature will independently unlock the driver’s door only when disarming
the keyless entry system.
• Pushing the button a second time within 3 seconds will unlock the other doors.
H. PANIC FUNCTION:
Press and hold the button for 3 seconds to activate the personal protection alarm and the icon will display on
the LCD screen. During panic mode, the normal function of the transmitter buttons will be suspended. The transmitter
and buttons can be used to lock and unlock the door (if the option is installed). To stop the alarm, press and hold the
button on the transmitter again for 3 seconds. The system will automatically stop after 30 seconds.

UM_FULL_56SL_REV_A 7
I. VALET MODE:
When servicing or loaning your vehicle to others, the system should be placed in Valet Mode.
Valet Mode prevents the system from remote starting functions.
Enter Valet Mode:
1. Under the system unlocked, turn ignition “ON/ OFF/ ON”
2. Press and hold valet switch for 2 seconds until the LED turns “ON” solid and icon will show on the LCD.
The LED will remain on as long as the system is in Valet Mode.
Exit Valet Mode:
1. Turn ignition “ON/OFF/ON”.
2. Push and hold the valet switch for 2 seconds. The LED will turn off indicating the system is exiting the ValetMode.
Remote Valet
Under the system unlocked, press the Fbutton 1 time rst then press the button. The parking lights will ash once,
the remote will read “Valet On” and icon will show on the LCD.
Exit: Repeat this process to exit valet mode. The parking lights will ash twice, remote read “Valet Off”
and icon will disappear conrming valet mode is disabled.
J. CAR LOCATOR:
Under the system Locked, press the button to activate the car locator function.
The horn will chirp 6 times. The parking light will ash 12 times, assisting you in easily locating your car.
K. DRIVER PAGING / LOST & FOUND. ((For two-way transceiver operation only)
This feature is useful in the event that someone wants to page the driver of a parked vehicle or
someone cannot nd his LCD remote transceiver. Under the ignition switch “OFF” condition,
press and hold the valet switch for 2 seconds to page the driver. One chirp sound is emitted from
the vehicle, a paging melody will continue to sound and the icon will ash on the LCD screen.
L. DOME LIGHT CONVENIENCE SUPERVISION
The keyless entry system has a unique feature that will turn on your vehicle dome light as follows:
1. Upon unlocking, the interior light will remain on for 30 seconds.
2. If the activated the panic, the interior light will ash for the same duration as the horn.
Note: Turning on the ignition switch or locking the alarm will turn off the dome light.
M. IGNITION CONTROL DOOR LOCK/UNLOCK. (Programmable Feature)
If the vehicles door locks have been interfaced to the keyless entry system, the system will automatically
lock the vehicle’s doors when the ignition is turned “ON” and /or unlock the vehicle’s doors when the ignition
is turned “OFF”. (Default setting is “OFF”)

UM_FULL_56SL_REV_A 8
N. TRUNK RELEASE (AUX 1 / CH 1) OUTPUT
Press and hold the button on the transmitter for 3 seconds to remotely control the
trunk release and the icon will show on LCD screen.
Aux 1 is a user-programmable timer output. You may program the built-in timer to send a
ground signal for any time duration from 1 second to 90 seconds. For instance, this timer
output may be used to turn on the headlights, power windows or sunroof.
Programmable Output:
Trunk (1 second pulse) / Aux 1 Latch / L Aux 1 Latch Reset with Ignition / Aux 1 Flex
(Aux 1 Control by Remote / Control by Lock / Control by Unlock / Control by Lock & Unlock / Control by Remote Start)
Latch: when the Aux 1 command is received the output will turn ON and remain ON and
the text and tones play to conrm until the command is received again and
text will be displayed on the LCD screen.
Latch/Reset/Ignition: when the Aux 1 command is received the wire will turn ON and remain
ON until the ignition is turned ON & OFF t or he command is received again and
text will be displayed on the LCD screen.
Flex: when the Aux 1 command is received the output will turn ON for the programmed
time duration (default 1sec.).
Aux (CH 1) Output Control:
1. Control by Remote: This option allows Aux 1 to be triggered by remote control command.
Press and hold buttons for 3 seconds to activate
Aux 1 function and. the text and tones play to conrm
2. Control by Lock: The Aux 1 output will activate for the lock command. If you send a
second lock command it will not trigger Again.
3. Control by Unlock: The Aux 1 output will activate for the unlock command. If the vehicle is
already in the unlocked state and you send a second unlock command it will not trigger the output.
4. Control by Lock and Unlock: the Aux 1 output will activate for the lock & unlock commands.
5. Control by Remote Start: the Aux 1 output will activate for any Remote Start activation.
O. AUX 2 (CH 2) TIME CONTROL OUTPUT (Optional Feature)
Press Fbutton rst then press button or press buttons +simultaneously to activate
Aux 2 function and. the text and tones play to conrm.
Aux 2 is a user-programmable timer output. You may program the built-in timer to send a ground signal
for any time duration from 1 second to 90 seconds. For instance, this timer output may be used to turn
on the headlights, power windows or sunroof. (Factory defaults setting at 1 second output.)
Programmable Output: Aux 2 Latch / Aux 2 Latch Reset with Ignition / Aux 2 Flex
(Aux 2 Control by Remote / Control by Lock / Control by Unlock / Control by Lock & Unlock / Control by Remote Start)

UM_FULL_56SL_REV_A 9
P. SECOND VEHICLE SECURITY OPERATION.
You can be utilized to control a second vehicle’s keyless entry system. To program the
remote control transmitter to a second vehicle, Press and hold the + buttons
2 seconds to select car 2 or car 1 operation.
4 Button Remote Transmitter:
For Car 2: When the LED start 2 pause ash then release buttons.
For Car 1: When the LED start 1 pause ash then release the buttons.
LCD Remote Transceiver:
For Car 2: When 2 icon and the text show on the LCD display then release the buttons.
Under Car 2 mode, the 2 icon will ash.
For Car 1: When 2icon disappears and the text show on the LCD display then release the buttons.
Q. CLEAR THE FLASHING TAMPER WARNING MESSAGE ICONS:
The ashing warning message icons in the LCD display will clear and reset when the transmitter
is used to lock the vehicle. Also, Locking then Unlocking the system will clear the ashing icons.
R. STOP THE MELODY SOUND:
Press any button on the LCD remote transmitter to stop the melody sound only.
S. ILLUMINATE LCD DISPLAY:
Press and hold the Fbutton for 1 second and the LCD indicator will light up
T. OUT OF REMOTE CONTROL RANGE:
If the icon disappears to indicate the remote failed to receive a command conrmation.

UM_FULL_56SL_REV_A 10
WARNINGS
As with any product that performs automatic functions, there are certain
safety precautions that you must practice and be aware of.
1. Keep the transmitter out of children’s reach.
2. Do not leave anyone in the vehicle while running on remote control.
3. Alert servicing personnel that the vehicle can be started automatically.
4. Do not start the vehicle by remote while it’s in an enclosed area or garage.
5. Always apply the parking brake and lock the vehicle as you exit the vehicle.
6. The vehicle windows must be rolled up.
7. Should the unit malfunction, disconnect the fuse until the problem is corrected.
8. The use and operation of this system is the sole responsibility of the operator.
9. Some areas may have local ordinances that prohibit leaving a vehicle running on public streets.
10. It is not safe to remote start the vehicle if the vehicle is parked on a steep incline.
REMOTE START OPERATION
A. To Remote Start the Vehicle
When you want to start your vehicle:
1. Press the button once on the transmitter.
2. The parking light will activate to indicate the remote start has received the signal.
3. The engine will start in approximately 5 seconds and the icon will blink to indicate that the engine is starting,
the icon will show on the LCD screen, the parking lights will turn on. While the vehicle is running, the
icon, the run time start countdown text and tones play to conrm. The countdown timer based on based
on the 3, 10, 20, 30 or 45 minute run time set installation center. (See feature bank 3-04 setting).
4. The vehicle will run for a programmable 3 to 45 minute cycle before shutting down. When the countdown
timer is off or press button, the system will be shut down, and the icon will disappear and tones
play on the LCD screen.
5. The vehicle refused to start running after 3unsuccessful attempts.
6. If Remote Start fails to start, the parking light will fast ash 4 times and text
and a fault tone play on the LCD transceiver.
B. Programmable Safety Start
By default, your Silencer remote starter is programmed to start/stop after pressing the button 1 time.
This default setting can be re-programmed to require 2 presses - .
This setting is known as “Child Safety Mode”.
Contact your installer to reprogram this feature if needed.

UM_FULL_56SL_REV_A 11
C. Running Time Extender
User Programmable Run Time / Run Time Extension. The system has the ability to allow the user to extend the time
the vehicle will be running under control of the remote start. This will only extend the run time back to the current run
time setting during the current remote start cycle. If your system is set to run 20 minutes and the time remaining is
4 minutes, extending the run time will reset the countdown timer to 20 minutes and your vehicle will continue to run
for another 20 minutes. Follow the steps below to extend the vehicle’s run time.
1. The remote start must already be active.
2. Press and hold the button for 2 seconds
3. The system will chirp 1 time and ash the parking lights 4 times and the run time Restart the countdown
text and tones play to conrm the run time has been reset and will indicate a countdown timer based on the 3, 10,
20, 30 or 45 minutes run time.
D. Operate The Vehicle While Running From The Remote Start
To operate the vehicle while the engine is running from the remote start:
1. Insert the ignition key and turn it to “ON” (not the start) position
2. Press the brake pedal.
Note: If the brake pedal is pressed before the key is in the “ON” position, the engine will shut down.
E. Temporary Stop Mode:
This mode allows the vehicle to remain running after the key has been removed from the ignition.
This feature is useful for occasions when you wish to exit and lock the vehicle for short periods
of time but would like to leave the motor running and the climate control on.
1. While the vehicle is running, place the transmission in PARK, set the emergency / parking brake.
2. With your foot off the brake pedal, press the button once, the parking lights will turn on and the run time start
countdown text and tones play to conrm that the system has entered Temporary Stop Mode.
3. Remove the keys from the ignition and exit the vehicle. Press the button to lock the vehicle’s doors if desired.
Note: Do not leave children or animals unattended in the vehicle when using the temporary stop feature.
F. To Turn Off the Remote Start
When the engine is running (by remote start) and you want to stop it:
1. Press the button once on the remote transmitter under the remote start mode.
2. Move the optional remote start enable toggle switch to the “OFF” position. (If installed)
3. Press the brake pedal.
4. Pull down the hand brake. (For Turbo Timer Mode)
The vehicle will shut down and turn off the parking light and the icon will disappear and
tones play to conrm the engine has stopped.

UM_FULL_56SL_REV_A 12
G. Disabling the Remote Start System: (If Installed)
This feature allows your system’s remote start unit to be temporarily disabled to prevent
the vehicle from being remote started accidentally. This feature is useful if the vehicle is
being serviced or stored in an enclosed area. To disable the remote start, move the
optional remote start enable toggle switch to the “OFF” position.
H. Timer Start Operation
This feature is designed to allow the user to have the system automatically remote start
at the end of a selected timed cycle. (Runtime interval based on feature 3-05 option setting.)
The running time interval will display on 2 ways LCD remote to conrm timer start is set.
Activate Timer start on / off
Depress F button rst then press button or Press the button rst, within 2 seconds
presses the button to activate timer start (or if ON, deactivates). A chirp from siren and
the parking light ashes 3 times and the icon, the or text and tone play
on the LCD transceiver.
Note: For Timer Start and Daily Timer Start:
1. This will be repeated in 24 hours.
2. Open the hood / trunk / doors or manually starts or remote starts the vehicle will cancel the timer start.
3. System needs to be locked or timer start will not start the engine.
4. 2 chirps from siren indicate fail to setting and the text and tone play on the LCD transceiver.
IMPORTANT: Timer Start and Daily Timer Start should be used only in open areas, never start
and run the vehicle in on enclosed space as a garage or carport.
Contact your installer to reprogram this feature if needed.
I. Daily Timer Start: (See LCD programming 2 setting)
This option will allow the user to set a predetermined time to remote start on the 2 way LCD remote.
Sets the time which you would like the start the vehicle rst (predetermined time based on LCD
programming 2 setting)
Note: it is important that the remote time is as accurate as possible when activating the
timer mode to ensure that it will start at the desired time.
Activate Daily timer start on / off:
Depress F button 2 times rst then press button (or if ON, deactivates). The parking light ashes 5 times and
the icon, the text and tone play on the LCD transceiver to conrm activates predetermined time
start. The vehicle is now programmed to start at the same time of the next day. Repeat the same step to turn off daily
timer start mode.

UM_FULL_56SL_REV_A 13
J. Turbo Timer Mode
The built in turbo timer keeps the vehicle’s engine running for either 1, 3, or 5 minutes,
after the vehicle key has been removed from the ignition. This feature will keep oil running
through the turbo system to allow for appropriate cooling time.
To activate:
Step 1: While the vehicle is running, place the transmission in neutral, set the emergency / parking brake.
Step 2: With your foot off the brake pedal, press buttons +simultaneously and the parking lights will turn on.
Remove the key from the vehicle’s ignition. The vehicle’s engine should remain running even after the key has been
removed If the vehicle does not remain running visit your local authorized dealer for service.
Step 3: Exit the vehicle and close the door. Press the transmitter button, the vehicle’s doors will lock/arm and then
engine will keep runs for the turbo runtime and the run time start countdown text and tones play to conrm.
Cancelling Turbo Timer Mode:
The system will exit Turbo Timer Mode if any of the following occur:
• You did not activate the parking brake prior to turning off the ignition.
• You pressed the foot brake after the key was removed from the ignition
• You released the parking brake after the key was removed from the ignition.
• You entered valet mode, opened the vehicle’s door, hood, trunk or set off the alarm.
• Press buttons +simultaneously to turn off turbo mode.
Note: Turbo Timer must be turned on by an authorized dealer.
K. Shutdown Diagnostics:
The unit has the ability to report the cause of the last shutdown of the remote start system.
Press Buttons +simultaneously.
4 Button Remote Transmitter: The parking light and chirps will report the reason of the system
last shutdown by ashing in the following grouped patterns,
LCD Remote Transceiver: The LCD display on the 2-way remote will report the reason
of the last shutdown, and the text and a fault tone play to conrm.

UM_FULL_56SL_REV_A 14
GROUP 1 (One Flash of Parking Light)
Chirps Shutdown Mode Solution
1Hood Open • Close the hood.
• Check 14-pin White/Black wire connection.
2Optional Enable Switch OFF or Black/
White must have a ground
• Check 14-pin Black/White wire connection.
• Move the Enable Toggle Switch to “ON” position. (If installed.)
Move the gear selector to “Park”/ “NEUTRAL” position
3Foot Brake on • Check 14-pin White/Violet wire connection
• Release Foot Brake.
4System is in Valet Mode Exit the Valet mode
5
Hi Voltage
(Voltage Checking Type) Set the “Feature 3-02 to “Low Level”
Low or No RPM
(Tachometer Checking Type)
• Check 14-pin White/ Red wire connection
• Set the “Feature 3-02 to “Hi Level”
• Re-learning the RPM
6The engine has run successfully but
is still starting (Tachometer Checking Type) •Set the “Feature 3-02 to “Low Level”
GROUP 2 (Two Flash of Parking Light )
Chirps Shutdown Mode Solution
1Over-Rev Shutdown
2Running Time expired
3Transmitter Shutdown

UM_FULL_56SL_REV_A 15
L. LCD Remote Control Program Setting
Enter:
1. Press and hold the Fbutton for 3 seconds until the text and a tone
play to conrm is heard and then release.
2. Press F button conrm the selection and move to the next setting, and the
“Display” text and a tone play to conrm.
Exit: Press and hold the Fbutton for 3 seconds until 2 beeps are heard and then release.
Feature Display button button button Function / Description
1Time Adjusts
Hour
Adjusts
Minute Sets the time on your remote
2Daily timer start
ash
Adjusts
Hour
Adjusts
Minute
Sets the time at which you want
your vehicle to start every day.
3Alarm Clock
Time ash
Adjusts
Hour
Adjusts
Minute On/Off Sets the time which you would like the remote alarm clock to alert you.
4Parking
Meter Timer ash
Adjusts
Hour
Adjusts
Minute On/Off Sets the time which you would like the parking meter timer to alert you.
5Backlight delay
or turn off 5 / 10 / OFF 5 sec. 10 sec. Backlight
Turn off Sets the Backlight of LCD
6
Car Icon
Illumination
icon
displayed or
not
icon
Displayed Not icon displayed when required by the 2-way information system.

UM_FULL_56SL_REV_A 16
SILENCER LIMITED LIFETIME WARRANTY
Magnadyne Corporation or its authorized agents will, for the life of the vehicle and to the original purchaser, repair, replace or refund the retail
sales price of said product or any part thereof, at the option of the Magnadyne Corporation or its authorized agents, if said product or part is found
defective in materials or workmanship, when properly connected and operating on the correct power requirements designated for the specic
product. This warranty and Magnadyne Corporation or its authorized agents obligations, hereunder do not apply where the product was: damaged
while in the possession of the consumer, subjected to unreasonable or unintended use, not reasonably maintained, utilized in commercial or
industrial operation, or serviced by anyone other than Magnadyne Corporation or its authorized agent, or where the warning seal on the product
is broken or the power plugs or wires are detached from the unit. Magnadyne Corporation or any of its authorized agents do not assume any
labor costs for the removal and reinstallation of any product found to be defective, or the cost of transportation to Magnadyne Corporation or its
authorized agents. Such costs are the sole responsibility of the purchaser.
This warranty does not cover the cabinet, appearance items, normal wear and tear or accessories used in connection with the product resulting
from improper installation, alteration, accident, misuse, abuse or acts of nature.
This Limited Life Time Warranty applies only to the receiver section of the security system. Neither the siren, transmitters, wire harness or any
accessory item added to or used with a Remote Mobile security system are covered by this Limited Life Time Warranty. Sirens, transmitters, wire
harness or any accessory item are covered by our standard 12 month limited warranty.
Magnadyne Corporation or its authorized agents shall not be liable to anyone for consequential or incidental damages or claims that may arise
due to failure of product to operate properly except those accorded by law. Magnadyne’s or its authorized agents liability to the repair, replacement
of the product as stated above if all conditions of the warranty are met. No expressed warranty or implied warranty is given except those set
forth herein. Magnadyne does not warrant or guarantee against break in damage or the theft of the vehicle in part or whole, or against the loss
or damage to the contents of any vehicle in which a security system is installed. Magnadyne security systems are only a deterrent against
possible theft.
This warranty extends only to the original purchaser of the product and for the vehicle in which it was originally installed. This warranty is not
transferable or assignable to any person or vehicle. Defective merchandise should be returned to the original point of purchase or secondly to
Magnadyne Corporation, 1111 W. Victoria Street, Compton, CA 90220. A return authorization must be obtained before sending, or merchandise
may be refused.
Warning: Some batteries may contain Perchlorate
What is Perchlorate? Perchlorate is both a naturally occurring and manmade contaminant increasingly found in groundwater, surface water and soil.
Most perchlorate manufactured in the U.S. is used as an ingredient in solid fuel for rockets and missiles. In addition, perchlorate-based chemicals
are also used in the construction of highway safety ares, reworks, pyrotechnics, explosives, common batteries, and automobile restraint systems.
Perchlorate contamination has been reported in at least 20 states. Perchlorate greatly impacts human health by interfering with iodide uptake into
the thyroid gland. In adults, the thyroid gland helps regulate the metabolism by releasing hormones, while in children; the thyroid helps in proper
development. Perchlorate is becoming a serious threat to human health and water resources. “Perchlorate Material – Special handling may apply.” For
more information, go to http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Magnadyne Corporation 1111 W. Victoria Street Compton CA 90220 [phone]
Please visit our website at www.magnadyne.com Made in Taiwan. All Rights Reserved