Silhouette Vivid Sky 1613 Owner's manual

Vivid Sky Technical
Instructions
Models 1613, 1614, 2956, 2957
V-Bevel Edging

Vivid Sky | Glazing with 100% Silhouette Panorama Lenses
Silhouette now offers premium prescription lenses for all
Silhouette frames.
Expertly crafted in Austria using our exclusive
Panorama®lens designs, 100% Silhouette is the perfect
unity of lenses, frames and service.
This results in a 100% Silhouette eyewear solution that
offers the wearer exceptional visual comfort and edge to
edge clarity.
For more information visit:
https://www.silhouette.com/us/us/vision-sensation,
scan the QR code or contact your Silhouette Account
Executive
Scan QR code to visit 100%
Silhouette website

Glazing | Vivid Sky
Frame is designed with a 5.0 base curve, however other base curves will work
Lenses with base curves flatter than 5.0 should have V-bevel cut to match 5.0 base
curve
Recommended lenses are High Index 1.6, 1.67, Polycarbonate and Trivex
OMA shape files available at
https://portal.silhouette.com
Cold glazing only! Do not heat front to
aid in lens insertion or removal!

Lens Removal| Vivid Sky
1. Partially pull the top frame rim up
2. Push the lens forward out of the rim
4TECHNICAL INFORMATION I VIVID SKY

Lens Insertion | Vivid Sky
1. Insert lens from the rear, starting with nasal corner
2. Continue inserting the lens along top to temporal corner
3. Continue around the lens circumference until the lens snaps into place.
5TECHNICAL INFORMATION I VIVID SKY

Inclination | Vivid Sky
6
1. Open the temple fully
2. Support hinge area as shown above and bend at hinge to desired angle
3. Do not change inclination more then +/- 5 degrees
TECHNICAL INFORMATION I VIVID SKY

Temple Opening Increase | Vivid Sky
7
Open the temple and push it outside with your thumb and index finger
TECHNICAL INFORMATION I VIVID SKY

Temple Opening Decrease | Vivid Sky
8TECHNICAL INFORMATION I VIVID SKY
Open the temple and push endpiece inward with your thumb and index
finger

Temple Removal | Vivid Sky
9
1. Close the temple fully and grab
temple with fingers
2. Pull off the temple off hinge
in direction of red arrow
TECHNICAL INFORMATION I VIVID SKY

Temple Assembling | Vivid Sky
10
1. With temple in position shown
above, align temple with hinge
fingers
2. Press the temple onto hinge in
direction of red arrow
TECHNICAL INFORMATION I VIVID SKY