Silver Cross Canterbury Wardrobe User manual

Canterbury Wardrobe
Assembly Instructions
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
IMPORTANT:
THE ASSEMBLY OF THIS PRODUCT
REQUIRES TWO PEOPLE

Parts List:
Fittings List:
A = 1pc B = 1pc C = 1pc
D = 1pc E = 1pc (R) E1 = 1pc (F) F = 1pc
G = 2pcs (L&R) H = 2pcs (L&R) I = 2pcs (L&R) K = 1pc
L= 2pcs L1= 4pcs (L&R) L2= 2pcs L3= 2pcs
M (M6X35) = 28pcs M1(M6X40) = 4pcs M2 (M6X60) = 2pcs N= 6pcs P(M4X25) = 4pcs
P1 (M4X15) = 28pcs O (M4X20) = 4pcs R = 2pcs
1 x PVC Bag
S = 4pcs P2(M4X20) = 8pcs Q = 6pcs
P2(M4X20) = 1pc Z = 1pc
Y = 1pc
1 x PVC Bag
V = 12pcs W = 6pcs
T = 1pc
X = 1pc
1 x PVC Bag
1 x PVC Bag

Step 1:
Step 2:
E
T
M1
V
T
M
G
B
D
M
T
E1
T
M1
V
G

Step 3:
Step 4:
T
M1
V
E
E1
G
B
D
M
T
M
M2
&
T
MM2
M2
A

Step 5:
Step 6:
C
T
M
Cut out at back

I
I
I
I
K
P1
X
P
Step 7:
Step 8:

S
QS
P2
H
W
Q
P1
X
N
X
X
Step 9:
For both doors
Step 10:

Step 11:
Step 12:
For both drawers

L2
L3
Step 13:
For both drawers
Step 14:
For both drawers

Step 15:
Step 16:
W
N
X

Z
Y
P2
X
Step 17:
Step 18:

X
Open
T
M
Open
Step 19:
To convert wardrobe into full length
hanging space by removing the top shelf
Step 20:
Remove 4 x retaining bolts M
and remove 7 x back panel
screws (6 x P1 and 1 x P)

C
F
X
Step 21:
Step 22:

B
A
C
C
A
Adjusting the gap between the doors
Loosen screw “A”, turn screw “B” clockwise or anti-
clockwise until the gap between doors is equal
then tighten screw “A”.
Adjusting the height of the doors
Loosen screws“C”then slide the hinge plate upor
down until the doors are even,then tighten the screws.
NOTE:The remaining two screws must be removed
prior to adjustment
Adjusting the angle of the door
Loosen screw“A”and slidethe hinge arm either
forwards orbackwards until the dooriseven
vertical then tighten screw“A”.

Notes:

Warnings&Instructions
For Safe Use & Maintenance
WARNING
NEVER LEAVE YOUR CHILD UNATTENDED.
The safety of your child is your responsibility.
Regularly check all fittings and components are
fully tightened and in good working order. If any
parts have become worn or damaged then do not
use the product and seek advice from your retailer
or Silver Cross. Only use spare parts supplied by
Silver Cross.
Be aware of the risk of open fire and other sources
of strong heat, such as electric bar fires, gas fires
etc. in the near vicinity of the wardrobe.
Never use the wardrobe if any parts are broken or
missing.
Never drag or pivot the wardrobe. It must be lifted
and moved by at least two people.
Before use, ensure the wardrobe is on a level,
stable surface.
Do not allow children to climb on the wardrobe.
The wardrobe can be cleaned with a damp cloth.
Never use bleach, abrasive or strong detergents.
Thoroughly dry immediately after cleaning.
WALL STRAP INFORMATION
Never modify or change the wall strap in any way.
Never use any other fittings other than those
supplied to attach the wall strap to the wardrobe.
The wall strap provided is to be used with this
product only.
Never use the screw provided to attach the strap
to the wall. All walls are of different composition
and it is important that the correct wall fittings are
used. Consult a professional before attempting
to attach the strap to the wall. No wall fittings are
supplied with this product.
The wall strap must not be used to replace any
other fittings supplied with this piece of furniture.
We recommend the wall strap is used in all cases.
To improve the stability of the furniture an even
wood or tiled floor is best. A carpeted or warped
floor can enable the furniture to rock, increasing
the potential of the furniture to fall over.
Silver Cross UK Ltd, Micklethorn, Broughton, Skipton, N Yorkshire BD23 3JA
0845 872 6900 www.silvercross.co.uk