POWERSOURCE
Tosetthebatteries
1.Pressthelatchesofthebatterycompart-
mentlidonthebottomcoverasillustrated
andremovethelid.
2.Installfourbatterieswithcorrectpolarityas
/indicated.
3.Putthelidback.
Notes:
•
Use four new
"D"
cell batteries.
IEC
designation LR20 (Alkaline)
or
R20
(Manganese) batteries.
Alkaline batteries recommended.
•If
the batteries are exhausted while in
operation, the message "WEAK
BATTERIES" willappear onthe display.
The batteries must be replaced with new
ones
of
the same kind.
•
When the printer is not used for a long
period
of
time, remove the batteries to
avoid the damage that may be caused by
battery leakage or corrosion.
ACAdaptor
Beforeusingtheprinter,checkthebackplate
ontherearsidetoseewhetherthevoltage
shownaccordswithpowersupply.
ConnecttheACadaptorcordwiththejackon
therearoftheprinterandwitha power
outlet.
Notes:
•
The installed batteries will be automatically
disconnected when the
AC
adaptor is
connected.
•If
the
AC
adaptor is not in use for a long
time, unplug itto avoid damage.
•
Use the designated
AC
adaptor only.
•
The connector next to the adaptorjack is
for
the optional interface.
4
