Silvercrest SIKP 2000 C1 User manual

English........................................................................................................................ 2
Suomi ....................................................................................................................... 21
Svenska ................................................................................................................... 41
Dansk....................................................................................................................... 61
Français.................................................................................................................... 81
Nederlands ............................................................................................................ 103
Deutsch................................................................................................................... 123
V 1.1

SilverCrest SIKP 2000 C1
2 - English
Contents
Introduction................................................................................................................ 3
Intended use............................................................................................................... 3
Package contents ....................................................................................................... 5
Controls and displays ................................................................................................. 6
Technical specifications............................................................................................... 7
Safety instructions ...................................................................................................... 8
Before you start ....................................................................................................... 12
Introduction to induction cooking................................................................................................................12
Suitable cookware .......................................................................................................................................12
Getting started ......................................................................................................... 13
Setup and connection .................................................................................................................................. 13
Use ................................................................................................................................................................13
Switching off using the timer........................................................................................................................15
Child lock......................................................................................................................................................16
Maintenance / cleaning ............................................................................................ 16
Troubleshooting ....................................................................................................... 17
Environmental regulations and disposal information ............................................... 18
Conformity ............................................................................................................... 18
Guarantee information............................................................................................. 19


SilverCrest SIKP 2000 C1
English - 3
Introduction
Thank you for buying a SilverCrest product.
The SIKP 2000 C1 induction hotplate can be used for preparing and cooking food and keeping it warm
in suitable pans. It is portable and easy to operate thanks to the touch-sensitive control panel.
Intended use
This induction hotplate is not intended for commercial use. This induction hotplate is suitable exclusively for
use indoors, in dry, sealed spaces. Always make sure that the induction hotplate is on a stable surface.
The device fulfils all relevant norms and standards relating to CE conformity. Any modifications to the
device other than recommended changes by the manufacturer may result in these standards no longer
being met.

SilverCrest SIKP 2000 C1
4 - English
Information on domestic electrical hobs
Symbol Value
Model code xSIKP 2000 C1
Hob type xElectric
Number of burners and cooking surfaces x1
Heating technology (induction burners and cooking
surfaces, radiation burners, hotplates) xInduction
For circular cooking surfaces and hotplates:
Diameter of usable area for each electrically heated
cooking surface, accurate to 5 mm.
Ø26 cm
For non-circular cooking surfaces and hotplates: Length
and width of usable surface for each electrically
heated cooking surface and each electrically heated
hotplate, accurate to 5 mm.
L
Wx
Energy consumption for each cooking surface, per kg EC electric cooking 145 Wh/kg
Electricity consumption of hob per kg EC electric hob 145 Wh/kg

SilverCrest SIKP 2000 C1
English - 5
Information on reducing environmental impact:
Only use the induction hotplate with induction-compliant pans. Never use 'induction adapter plates', these
adapter plates considerably reduce the energy efficiency of an induction hotplate (available temperature
in the pan relative to the energy used) and invalidate all the benefits of a hob of this kind. This is down to
the heat transfer between the adapter plate and the base of the pan. This means the process takes longer
and energy is wasted.
Predictable misuse
The induction hotplate is not designed to be used with an external timer or a separate remote control
system.
Risk of burns!
Do not place other items (e.g. cutlery, utensils, pan lids, etc.) on the hotplate. These could get
very hot and you could burn yourself.
Package contents
SilverCrest SIKP 2000 C1 induction hotplate
This user manual

SilverCrest SIKP 2000 C1
6 - English
Controls and displays
These operating instructions have a fold-out cover. On the inside of the cover, the induction hotplate is
shown with figures indicated. The meanings of the numbers are as follows:
1 Power cord
2 Heating zone
3 Display
4 Symbol for power display (Watt)
5 Symbol for temperature display
6 On/Off button
7 Function button (switch between power/temperature display)
8 Rotary controller (– Level down / + Level up)
9 Sensor button for timer
10 Sensor button for child lock
11 Symbol for child lock
12 Symbol for timer

SilverCrest SIKP 2000 C1
English - 7
Technical specifications
Manufacturer SilverCrest
Model name: SIKP 2000 C1
Operating voltage: 220 - 240 V, 50/60 Hz
Power: max. 2000 W
10 power levels: 200, 400, 600, 800, 1000, 1200, 1400,
1600, 1800, 2000 Watt
Correspond to 10 temperature levels: 60, 80, 100, 120, 140,
160, 180, 200, 220, 240 °C
Display: 4 digits with LED lighting
Timer: 3 hour countdown in 1 minute increments
Control panel: touch-sensitive sensor buttons and rotary controller, child lock
Power cord length: 2.00 m
Dimensions: approx. 282 x 355 x 75 mm (W x D x H)
Weight: approx. 2.6 kg
Max pan diameter: 26 cm
TÜV Rheinland: Tested safety
Protection Class II

SilverCrest SIKP 2000 C1
8 - English
Safety instructions
Before you use this device for the first time, please carefully read the following instructions and heed all
warnings, even if you are familiar with handling electronic devices. Keep these operating instructions in a
safe place for future reference. If you sell the device or give it away, pass on the user manual at the same
time. It forms part of the product.
Explanation of symbols
In this user manual, warnings are used as follows. Some of these symbols are affixed to the product itself
in order to alert the user to potential risks.
Risk of burns!
This symbol warns of hot surfaces.
Do not touch!
This warning warns against touching the surface of the hotplate.
WARNING!
This symbol denotes important information for the safe operation of the product and user
safety. It warns against risks which could, if left unheeded, cause danger to life and limb,
injuries or material damage.
Risk of electric shock!
This symbol warns of risks which could, if left unheeded, cause damage to life and limb
through electric shock.
Risk of fire!
This symbol warns that fires could start if the warning is left unheeded.
This symbol denotes further information on the topic.
Children and people with disabilities
This device may be used by children older than 8 years as well as by persons with reduced physical,
sensory or mental capacities or those persons who have lack of knowledge or experience, as long as they
are supervised or they have received instructions regarding the proper use of the appliance and they
understand the associated risks. Do not allow children to play with the appliance. Any cleaning or
maintenance of the product must not be performed by children unless they are supervised.
Children under the age of 8 must be kept away from the device and the power cord.
WARNING of suffocation!
Packaging material is not a toy. Do not allow children to play with plastic bags. There is a risk
of suffocation.

SilverCrest SIKP 2000 C1
English - 9
WARNING of falling objects!
Make sure that children cannot pull the device from the work-surface by the power cord. There
is a danger of injury.
Keep the device out of the reach of children.
General safety instructions
Risk of burns!
 Do not place other items (e.g. cutlery, utensils, pan lids, etc.) on the hotplate. These could
get very hot and you could burn yourself.
 Do not touch the heating surface a cooking vessel has previously been standing on. After
the cooking vessel is removed, the heating surface can still be very hot.
Risk of fire!

Oil and fat can catch fire if over-heated. Therefore, be careful when heating oil and fat.
Never leave hot oil or fat unattended.
 Risk of explosion! Never attempt to extinguish burning oil or fat with water. Instead,
smother it by covering the cooking pan with a well-fitting lid or plate. Unplug the mains
plug from the wall socket.
 Do not place the device on textile surfaces such as a tablecloth.
 Do not place the device on metal surfaces. These can heat up quickly and cause a fire.
 Never place the device under flammable items such as curtains.
 The openings on the bottom of the product must never be covered. Keep a distance of at
least 10 cm clear all around the device and at least 60 cm clear above it to guarantee
sufficient cooling.
Risk of electric shock!
 The induction hotplate housing and power cable must not be damaged in any way.
Never replace a damaged cable, instead contact customer services (see "Guarantee
information" on page 19), If the housing or the power cord is damaged, there is a risk of
electric shock.
 Never open the housing of the induction hotplate as there are no components inside
which require maintenance. If the housing is opened, there is a risk of electric shock.
 If you notice any smoke, unusual noises or strange smells, switch off the device
immediately and remove the plug from the wall socket. If this occurs, do not continue to
use the device and have it checked out by an expert. Never inhale smoke from a
possible device fire. If you do inadvertently inhale smoke, seek medical attention. Smoke
inhalation can be damaging to your health.

Sil
v
10
v
erCrest SIKP 2
0
- English
 M
a
w
r
a
 M
a
 Ev
e
ou
t
wa

Wh
its
e
 Al
w
th
e
 If
y
de
v
(s
ee
 O
n
who
th
e
q
u
i
 N
e
ot
h
wa
p
a
g
 If t
h
di
sc
Dange
r
Medica
l
electro
m
manufa
c
Dama
g
Keep t
he
electro
m
Warni
n
 D
o
p
a
n
0
00 C1
a
ke sure that th
e
a
p the power c
o
a
ke sure that th
e
e
n when switch
e
t
let. In order to
d
a
ll outlet.
Wh
en disconnecti
n
e
l
f
.
w
ays remove th
e
e
device, before
c
y
ou notice visibl
e
v
ice off, discon
n
ee
"Guarantee i
n
n
ly c
o
nnect the i
n
ho
se mains volta
g
e
wall outlet mu
st
i
ckly in the even
t
e
ver immerse th
e
h
er liquids. If liq
u
a
ll outlet immedi
a
g
e 19).
h
e glass plate o
n
sc
onnect it from
t
r
from electr
o
l
devices (pac
e
m
agnetic fields.
c
turer.
g
e caused by
he
induction ho
tp
m
agnetic fields (
e
n
g about pro
p
o
not heat empt
y
n
s and the devi
c
e
power cord ca
n
o
rd around the
h
e
power cord ca
n
e
d off, the induc
ti
d
isconnect it fro
m
n
g the power su
p
e
plug from the
o
c
leaning and d
u
e
damage to th
e
n
ect the mains p
lu
n
formation" on
pa
n
duction hotpla
te
g
e corresponds
st
still be easily
a
t
of an emerge
nc
e
induction hotp
la
u
id does penetr
a
a
tely and conta
c
n
the hotplate is
t
h
e
w
all outlet i
n
o
magnetic fi
e
e
makers, heari
ng
Maintain a
electromag
n
tp
late at least
1
e
.g. magnetic st
o
p
erty dama
g
y
cooking vessel
s
c
e.
n
not be damag
e
h
otplate.
n
not
g
et crushe
d
ti
on hotplate is
no
m
the mains co
mp
p
ply, always pu
l
o
utlet if you hav
e
u
ring thundersto
r
e
induction hotpl
a
lu
g from the wa
ll
pa
ge 19).
te
to a properly
i
to that on the r
a
ac
cessible so tha
t
c
y.
la
te, the power
c
a
te into the pro
du
c
t c
u
stomer serv
ic
cracked or bro
k
n
order to avoid
a
e
lds!
ng
aids, etc.)
c
safety distanc
e
etic fields!
1
m away fro
m
o
rage media, el
e
e
s
as they can qu
i
e
d by sharp ed
g
d
or squashed.
n
ot entirely disc
o
m
pletely, unplug
t
ul
l on the plug a
n
e
any problems,
r
ms.
la
te or t
h
e pow
er
ll
outlet and con
t
i
nstalled, easily
a
ting plate. Afte
r
at
you can remo
v
c
ord or the mai
ns
du
ct, disconnect
t
i
ces (see "Guar
a
k
en, switch the
d
a
possible elec
tr
c
an be influen
c
e
as recomm
e
m
devices whic
h
e
ctronic devices
,
i
ckly overheat
a
g
es or hot spots.
o
nnected from t
he
t
he mains plug
f
n
d never on the
c
if you are not
us
er
cord, switch t
he
t
act customer s
er
a
ccessible wall
r
connecting the
v
e the mains
p
lu
g
ns
plug in water
o
t
he mains plug
fr
a
ntee informatio
n
d
evice off and
tr
ic shoc
k
.
c
ed and dama
g
e
nded by the
h
could be affe
c
,
clocks, etc.).
a
nd damage bo
th
Never
he
wall
fr
om the
c
able
s
ing
he
r
vices
o
utlet
device,
g
o
r
fr
om the
n
" on
g
ed by
device
c
ted by
th
the

SilverCrest SIKP 2000 C1
English - 11
 Make sure that the induction hotplate is not subject to excessive vibration, as this can
cause the hotplate to break. Be careful not to drop the induction hotplate! There is a risk
of injury if the hotplate is broken!
 Be careful when preparing soups and stews. The weight of the cooking vessel and the
contents together must not exceed 10 kg.
 You can damage the induction hotplate by trying to scrape caramel off it. If you do spill
food containing sugar, remove it immediately before it cools. In general, any food
spillages should be removed immediately.
 Do not use abrasive or astringent detergents or tools which could scratch the surface.
These could damage the hotplate.
 The induction hotplate has non-slip plastic feet. If necessary, place something underneath
the device, as work-surfaces are sometimes treated with detergents which could attack or
even dissolve the plastic feet.
Mains cable
Always hold the power cable by the mains plug and never pull on the cable itself. Never
place the device, furniture or any other heavy objects on the cable and take care that the
cable does not become trapped. Never tie knots in the mains cable and do not tie it to other
cables. All cables must be laid so that nobody can trip over them or be obstructed by them.
Never use adapter plugs or extension cables that do not comply with the safety regulations
applicable in your country, and do not modify the power cord yourself. Any damaged power
cord must be replaced by the manufacturer or authorised customer service.

SilverCrest SIKP 2000 C1
12 - English
Before you start
Unpack the device. First check whether all the parts are complete and undamaged. If any items are
missing or damaged, please phone our hotline (see "Guarantee information" on page 19). Keep the
packaging material away from children and dispose of appropriately.
Introduction to induction cooking
Cooking with an induction hotplate works differently to what you are used to from normal hotplates. The
heat is generated by means of an electromagnetic field in the base of the cooking vessel and not by
means of heat resistors in the heating zone. This saves energy and reduces cooking times.
At high power, the content of the cooking vessel is heated much quicker, it also reacts much more quickly
to the temperature being turned down. You could say that using an induction hotplate is very similar to
cooking with gas.
But you do need special induction-compatible cookware with a ferromagnetic base.
Suitable cookware
Only use ferromagnetic cookware which is suitable for induction hotplates. These should be labelled
accordingly when you buy them. Cookware made of non-magnetic metals (aluminium, copper, etc.) and
other materials (e.g. ceramics, porcelain, glass, etc.) is not suitable.
The base of the cookware must be able to stand flat on the induction hotplate, be smooth and have a
diameter of between 16 and 26 cm.
If the cookware is not the right diameter or is made of unsuitable material, the hotplate
automatically switches off. A beeper sounds every 4 seconds and the error E0 is shown on the
display.

SilverCrest SIKP 2000 C1
English - 13
Getting started
Setup and connection
Place the device on an even, non-slip and dry surface.
Risk of fire!
 Do not place the device on textile surfaces such as a tablecloth.
 Do not place the device unit on metal surfaces. These can heat up quickly and cause a
fire.
 Never place the device under flammable items such as curtains.
 The openings on the bottom of the product must never be covered. Keep a distance of at
least 10 cm clear all around the device and at least 60 cm clear above it to guarantee
sufficient cooling.
Use

If you switch the induction hotplate off and the surface temperature of the heating zone is
higher than 60 °C, "H" is shown on the display. If the temperature drops below 60 °C,
the display shows "L".
 If you remove the pan from the induction hotplate when in use and the surface
temperature of the heating zone is greater than 60 °C, the display shows "H-EO" and a
beeper sounds every 4 seconds. After around 45 seconds, the beeper stops and only
"H" is displayed. About a minute later, the device switches itself off. The display continues
to show "H" as long as the surface temperature of the hotplate is greater than 60 °C. If
the temperature drops below 60 °C, the display shows "L".
 When the hotplate is switched on, the preset power level is 1000 W.
1. Connect the hotplate to a live wall socket using the power cord (1). A beeper then sounds and the
display (3) shows "L" or "H" depending on the temperature.
2. Place a pan on the hotplate (2).
Warning about property damage
 The pan must be explicitly suitable for induction hotplates. Do not use any other pans
(e.g. ceramic ones).
 Be careful when preparing soups and stews. The weight of the cooking vessel and the
contents together must not exceed 10 kg.

SilverCrest SIKP 2000 C1
14 - English
3. Press the On/Off button (6) to switch the hotplate on and then press the function key (7)
within 10 seconds. The display (3) shows the power level in Watts (default setting 1000 W).
When it is running, the cooler fan is also running and the hotplate can hum slightly when
cooking. This is not a malfunction.
4. Use the rotary controller (8) to set the power required in Watts or press the function key (7) to
display the cooking temperature on the display (3) and adjust it using the rotary controller (8). A
beeper will sound by way of confirmation.
Risk of burns!
Do not touch the contact surface a cooking vessel has previously been standing on. After the
cooking vessel is removed, the cooking surface can still be very hot.
Use the function key (7) to switch between the power (4) and the temperature display (5).
However, please note that when you switch over, the power is always set to 1000 W and the
temperature to 120 °C, irrespective of what it was set to before. So you need to make sure
your food does not burn.
Risk of fire!
 Oil and fat can catch fire if over-heated. Therefore, be careful when heating oil and fat.
Never leave hot oil or fat unattended.
 Risk of explosion! Never attempt to extinguish burning oil or fat with water. Instead,
smother it by covering the cooking pan with a well-fitting lid or plate. Unplug the mains
plug from the wall socket.
5. Prepare your food. While you are cooking, set the power or temperature you want using the rotary
controller (8).
6. When you are finished, switch off the induction hotplate. To do this, press the On/Off button (6).
A beeper then sounds and the display (3) shows "L" or "H" depending on the temperature.
Warning about property damage
The cooling fan runs for a while after you switch off. Do NOT remove the mains plug from the
wall socket while the cooling fan is still running.

If you switch the induction hotplate off and the surface temperature of the hotplate is
higher than 60 °C, "H" is shown on the display. If the temperature drops below 60 °C,
the display shows "L".

SilverCrest SIKP 2000 C1
English - 15
 If you remove the pan from the induction hotplate when in use and the surface
temperature of the hotplate is greater than 60 °C, the display shows "H-EO" and a
beeper sounds every 4 seconds. After around 45 seconds, the beeper stops and only
"H" is displayed. About a minute later, the device switches itself off. The display continues
to show "H" as long as the surface temperature of the hotplate is greater than 60 °C. If
the temperature drops below 60 °C, the display shows "L".
Switching off using the timer
You can program the timer to switch the hotplate off automatically after a preset time.
1. Press the sensor button for the timer (9) when cooking with the hotplate to program the timer.
2. Use the rotary controller (8) to set the cooking time you want (hours:minutes) before the hotplate is to
switch off.
You can program the cooking time to between 00:00 to 3:00 hours.
The time set flashes briefly and then the remaining time (countdown) is shown on the display (3).
If the timer is activated, the indicator (12) lights up and alternates showing the power or temperature and
the remaining time at around 5 second intervals.
If necessary, you can adjust the power or temperature using the rotary controller (8).
Once the countdown reaches zero, the hotplate automatically switches off. A beeper sounds.
In order to switch the hotplate off manually before the time has elapsed, press the On/Off
button (6).

SilverCrest SIKP 2000 C1
16 - English
Child lock
The induction hotplate has a child lock so that the settings cannot be changed accidentally.
How to activate or deactivate the child lock:
1. Press the button (10) once. An acoustic signal can be heard and the indicator (11) lights up. The
child lock is now activated.
2. Press and hold the button (10) for 3 seconds. An acoustic signal can be heard and the indicator
(11) light goes out. The child lock is now deactivated again. You can use the hotplate as normal.
You can also activate the child lock when the induction hotplate is switched off.
Maintenance / cleaning
In order to avoid burning food residues, clean the hotplate after every use.
Risk of burns!
Wait until the heating zone is completely cool before cleaning it. Otherwise you could get
burnt.
Risk of electric shock!

Always remove the mains plug from the socket before cleaning. Failure to do so could
cause an electric shock.
 Do not poor or spray liquids onto the induction hotplate or through the ventilation slots.
This could cause short circuits which could cause electric shocks or burns.
Warning about property damage
Do not use abrasive or astringent detergents or tools which could scratch the surface. These
could damage the hotplate.
Clean the side surfaces and the mains cable with a slightly damp cloth.
Dirt and burnt-on food residues on the surface of the heating zone can be cleaned off using a scraper for
glass hotplates and an appropriate detergent.

SilverCrest SIKP 2000 C1
English - 17
Troubleshooting
If your induction hotplate does not work as normal, follow the instructions below to try to solve the
problem. If working through the tips below does not fix the fault, please contact our hotline (see
"Guarantee information" on page 19)
Risk of electric shock!
Never try to repair the device yourself.
Problem Possible causes Remed
y
Induction hotplate
not working
Mains cable not connected Connect the mains cable to a live wall socket.
Child lock activated. Press and hold the button (10) for 3 seconds to
deactivate the child lock.
Heating zone not
getting hot
No pan on the heating
zone (2)
Place a pan on the heating zone (2).
Cookware not suitable for
induction
Only use cookware which is suitable for
induction hotplates.
Error E0 is shown
on the display (3)
No pan on the heating
zone (2)
Place a pan on the heating zone (2).
Cookware not suitable for
induction
Only use cookware which is suitable for
induction hotplates.
Cookware is too small in
diameter or not standing
centrally on the heating
zone (2).
Only use cookware with a diameter of between
16 and 26 cm and place it on the centre of the
heating zone.
Error E5 is shown
on the display (3)
Hotplate temperature too high Wait a few minutes until the heating zone has
cooled down.
Empty pan Fill the pan with food.
Error E6 is shown
on the display (3)
Cooling fan faulty Contact our hotline. See the "Guarantee
information" on page 19.
Error E1, E2, E3 or
E4 is shown on the
display (3)
Technical fault Contact our hotline. See the "Guarantee
information" on page 19.

SilverCrest SIKP 2000 C1
18 - English
Environmental regulations and disposal information
A symbol depicting a crossed-out rubbish bin on a product means it is subject to
European Directive 2012/19/EU. All electrical and electronic devices must be
disposed of separately from household waste at official disposal centres.
Do not dispose of the device in household waste or bulky waste collections.
Information on collection points and pick-up times can be obtained from your local
council or waste disposal company.
Dispose of all packaging in an environmentally friendly manner. Cardboard packaging can be taken to
paper recycling centres or public collection points for recycling. Any film or plastic contained in the
packaging should be taken to your public collection points for disposal.
Conformity
This device complies with the basic and other relevant requirements of the EMC
Directive 2004/108/EC, the Low-voltage Directive 2006/95/EC, the ErP Directive
2009/125/EC and the RoHS Directive 2011/65/EU. The corresponding
Declaration of Conformity can be found at the end of this User Manual.