Silvercrest SIKP 2000 D1 User manual

English........................................................................................................................ 2
Ελληνικά .................................................................................................................. 27
Deutsch..................................................................................................................... 55
V 3.2

SilverCrest SIKP 2000 D1
2 - English
Contents
1. Intended use........................................................................................................... 3
2. Package contents ................................................................................................... 5
3. Controls and displays ............................................................................................. 5
4. Technical specifications ........................................................................................... 6
5. Safety instructions .................................................................................................. 7
6. Before you start.................................................................................................... 18
6.1 Introduction to induction cooking.........................................................................................................18
6.2 Suitable cookware ................................................................................................................................18
7. Getting started ..................................................................................................... 18
7.1 Setup and connection ...........................................................................................................................18
7.2 Use .........................................................................................................................................................19
7.3 Switching off using the timer.................................................................................................................20
7.4 Child lock...............................................................................................................................................21
8. Maintenance / cleaning ........................................................................................ 21
9. Troubleshooting ................................................................................................... 22
10. Environmental regulations and disposal information.......................................... 23
11. Conformity ......................................................................................................... 23
12. Guarantee information....................................................................................... 24

SilverCrest SIKP 2000 D1
English - 3
Congratulations!
By purchasing the SIKP 2000 D1 induction hotplate you have opted for a quality product.
Before first using it, familiarise yourself with the way the induction hotplate works and read these
operating instructions through carefully. Be careful to follow the safety instructions and only use the
induction hotplate as described in the operating instructions and for the applications given.
Keep these operating instructions in a safe place. If you pass the induction hotplate on to someone else,
make sure to give them all the relevant documents with it.
1. Intended use
The SIKP 2000 D1 induction hotplate can be used for preparing and cooking food and keeping it warm
in suitable pans. It is portable and easy to operate thanks to the touch-sensitive control panel.
This induction hotplate is not intended for commercial use. This induction hotplate is suitable exclusively for
use indoors, in dry, sealed spaces. Always make sure that the induction hotplate is on a stable surface.
The device fulfils all relevant norms and standards relating to CE conformity. Any modifications to the
device other than recommended changes by the manufacturer may result in these standards no longer
being met.

SilverCrest SIKP 2000 D1
4 - English
Information on domestic electrical hobs
Symbol Value
Model code xSIKP 2000 D1
Hob type xElectric
Number of burners and cooking surfaces x 1
Heating technology (induction burners and cooking
surfaces, radiation burners, hotplates) xInduction
For circular cooking surfaces and hotplates:
Diameter of usable area for each electrically heated
cooking surface, accurate to 5 mm.
Ø22 cm
For non-circular cooking surfaces and hotplates: Length
and width of usable surface for each electrically
heated cooking surface and each electrically heated
hotplate, accurate to 5 mm.
L
Wx
Energy consumption for each cooking surface, per kg EC electric cooking 182.6 Wh/kg
Electricity consumption of hob per kg EC electric hob 182.6 Wh/kg
Testing method:
The product has been tested in accordance with the following testing standards:
DIN EN 60350-2: 2013+A11: 2014, Household electric cooking appliances - Part 2: Hobs - Methods
for measuring performance.
(tested in accordance with (EU) Regulation 66/2014, Appendix I, Section 2 and 2.2)

SilverCrest SIKP 2000 D1
English - 5
Information on reducing environmental impact:
Only use the induction hotplate with induction-compliant pans. Never use 'induction adapter plates', these
adapter plates considerably reduce the energy efficiency of an induction hotplate (available temperature
in the pan relative to the energy used) and invalidate all the benefits of a hob of this kind. This is down to
the heat transfer between the adapter plate and the base of the pan. This means the process takes longer
and energy is wasted.
Predictable misuse
The induction hotplate is not designed to be used
with an external timer or a separate remote control
system.
Risk of burns!
Do not place other items (e.g. cutlery, utensils,
pan lids, etc.) on the hotplate. These could get
very hot and you could burn yourself.
2. Package contents
SilverCrest SIKP 2000 D1 induction hotplate
This user manual
3. Controls and displays
These operating instructions have a fold-out cover. On the inside of the cover, the induction hotplate is
shown with figures indicated. The meanings of the numbers are as follows:
1 Power cable
2 Heating zone
3 Symbol for child lock
4 Symbol for timer
5 Symbol for power display (Watt)

SilverCrest SIKP 2000 D1
6 - English
6 Symbol for temperature display
7 Display
8 Sensor button for child lock
9 Sensor button for timer
10 On/Off button
11 Rotary controller (– Level down / + Level up)
12 Function button (switch between power/temperature display)
4. Technical specifications
Manufacturer SilverCrest
Model name: SIKP 2000 D1
Operating voltage: 220 - 240 V~(AC), 50/60 Hz
Power: max. 2000 W
10 power levels: 200, 400, 600, 800, 1000, 1200, 1400,
1600, 1800, 2000 Watt
Correspond to 10 temperature levels: 60, 80, 100, 120, 140,
160, 180, 200, 220, 240 °C
Display: 4 digits with LED lighting
Timer: 3 hour countdown in 1 minute increments
Control panel: touch-sensitive sensor buttons and rotary controller, child lock
Power cord length: 2.00 m
Dimensions: approx. 34 cm x 29.5 cm x 7.4 cm (W x D x H)
Weight: approx. 2,820 g
Max pan diameter: 26 cm
Protection Class II

SilverCrest SIKP 2000 D1
English - 7
5. Safety instructions
Before you use this device for the first time, please
carefully read the following instructions and heed all
warnings, even if you are familiar with handling
electronic devices. Keep these operating instructions
in a safe place for future reference. If you sell the
device or give it away, pass on the user manual at
the same time. It forms part of the product.
Explanation of symbols
In this user manual, warnings are used as follows.
Some of these symbols are affixed to the product
itself in order to alert the user to potential risks.
Risk of burns!
This symbol warns of hot surfaces.
Do not touch!
This warning warns against touching the
surface of the hotplate.

SilverCrest SIKP 2000 D1
8 - English
WARNING!
This symbol denotes important information for
the safe operation of the product and user
safety. It warns against risks which could, if left
unheeded, cause danger to life and limb,
injuries or material damage.
Risk of electric shock!
This symbol warns of risks which could, if left
unheeded, cause damage to life and limb
through electric shock.
Risk of fire!
This symbol warns that fires could start if the
warning is left unheeded.
This symbol denotes further information on the
topic.
Children and people with disabilities
This device may be used by children older than 8
years as well as by persons with reduced physical,
sensory or mental capacities or those persons who

SilverCrest SIKP 2000 D1
English - 9
have lack of knowledge or experience, as long as
they are supervised or they have received
instructions regarding the proper use of the
appliance and they understand the associated risks.
Do not allow children to play with the appliance.
Cleaning and user maintenance must not be carried
out by children unless they are older than 8 years
old and supervised.
Children under the age of 8 must be kept away from
the device and the power cable (1).
Risk of suffocation!
Packaging material is not a toy. Do not allow
children to play with plastic bags. There is a
risk of suffocation.
Risk of falling objects!
Make sure that children cannot pull the device
from the work surface by the power cable (1).
There is a danger of injury.
Keep the device out of the reach of children.

SilverCrest SIKP 2000 D1
10 - English
General safety instructions
Risk of burns!

Do not place other items (e.g. cutlery,
utensils, pan lids, etc.) on the heating zone
(2). These can become very hot and cause
burns.
 Do not touch the heating zone (2) surface a
cooking vessel has previously been standing
on. After the cooking vessel is removed, the
heating zone (2) surface can still be very
hot.
Risk of fire!

Oil and fat can catch fire if over-heated.
Therefore, be careful when heating oil and
fat. Never leave hot oil or fat unattended.
 Risk of explosion! Never attempt to
extinguish burning oil or fat with water.
Instead, smother it by covering the cooking
pan with a well-fitting lid or plate. Unplug

SilverCrest SIKP 2000 D1
English - 11
the mains plug from the mains socket.
 Do not place the device on textile surfaces
such as tablecloths.
 Do not place the device on metal surfaces.
These can heat up quickly and cause a fire.
 Never place the device under flammable
items such as curtains.
 The openings on the bottom of the product
must never be covered. Keep a distance of
at least 10 cm clear all around the device
and at least 60 cm clear above it to
guarantee sufficient cooling.
Risk of electric shock!
 The induction hotplate housing and power
cable (1) must not be damaged in any way.
Never replace a faulty cable, instead
contact our customer service (see "Warranty
information" on page 24). If the housing or
power cable (1) are damaged, there is a

SilverCrest SIKP 2000 D1
12 - English
risk of electric shoc
k
.
 Never open the housing of the induction
hotplate as there are no components inside
which require maintenance. If the housing is
open, there is a risk of electric shock.
 If you notice any smoke, unusual noises or
strange smells, switch off the device
immediately and remove the plug from the
mains socket. If this occurs, do not continue
to use the device and have it checked out
by an expert. Never inhale smoke from a
possible device fire. If you do inadvertently
inhale smoke, seek medical attention.
Smoke inhalation can be damaging to your
health.
 Make sure that the power cable (1) cannot
be damaged by sharp edges or hot spots.
Never wrap the power cable (1) around the
heating zone (2).
 Make sure that the power cable (1) cannot

SilverCrest SIKP 2000 D1
English - 13
become crushed or squashed.
 Even when switched off, the induction
hotplate is not entirely disconnected from
the mains socket. In order to disconnect it
from the mains completely, unplug the mains
plug from the mains socket.
 When disconnecting the power supply,
always pull on the plug and never on the
power cable (1) itself.
 Always remove the plug from the mains
socket if you have any problems, if you are
not using the device, before cleaning and
during thunderstorms.
 If you notice visible damage to the induction
hotplate or the power cable (1), switch the
device off, disconnect the mains plug from
the mains socket and contact customer
services (see "Warranty information" on
page 24).

SilverCrest SIKP 2000 D1
14 - English
 Only connect the induction hotplate to a
properly installed, easily accessible mains
socket whose mains voltage corresponds to
that on the rating plate. After connecting the
device, the mains socket must still be easily
accessible so that you can remove the mains
plug quickly in the event of an emergency.
 Never immerse the induction hotplate, the
power cable (1) or the mains plug in water
or other liquids. If liquids have entered the
product, disconnect the mains plug from the
mains socket immediately and contact
customer service (see "Warranty
information" on page 24).
 If the glass plate on the heating zone (2) is
cracked or broken, switch the device off and
disconnect it from the mains socket in order
to avoid a possible electric shock.
Danger from electromagnetic fields!
Medical devices (pacemakers, hearing aids,

SilverCrest SIKP 2000 D1
English - 15
etc.) can be influenced and damaged by
electromagnetic fields. Maintain a safety
distance as recommended by the device
manufacturer.
Damage caused by electromagnetic
fields!
Keep the induction hotplate at least 1 m away
from devices which could be affected by
electromagnetic fields (e.g. magnetic storage
media, electronic devices, clocks, etc.).
Warning about property damage
 Do not heat empty cooking vessels as they
can quickly overheat and damage both the
pans and the device.
 Make sure that the induction hotplate is not
subject to excessive vibration, as this can
cause the heating zone (2) to break. Be
careful not to drop the induction hotplate!
There is a risk of injury if the heating zone

SilverCrest SIKP 2000 D1
16 - English
(2) is broken!
 Be careful when preparing soups and stews.
The weight of the cooking vessel and the
contents together must not exceed 10 kg.
 You can damage the induction hotplate by
trying to scrape caramel off it. If you do spill
food containing sugar, remove it
immediately before it cools. In general, any
food spillages should be removed
immediately.
 Do not use abrasive or astringent detergents
or tools which could scratch the surface.
These could damage the heating zone (2).
 The induction hotplate has non-slip plastic
feet. If necessary, place something
underneath the device, as work-surfaces are
sometimes treated with detergents which
could attack or even dissolve the plastic
feet.

SilverCrest SIKP 2000 D1
English - 17
Power cable
Unplug the power cable (1) holding the mains
plug and never pull on the cable (1) itself.
Never place the device, pieces of furniture or
other heavy objects on the power cable (1)
and take care that this does not become
trapped. Never tie knots in the power cable
(1) and do not tie it to other cables. All cables
should be positioned so that nobody can trip
over them or be obstructed by them. Never use
adapter plugs or extension cables that do not
comply with the safety regulations applicable
in your country, and do not modify the power
cable (1) yourself. Any damaged power cable
(1) must be replaced by the manufacturer or
authorised customer service.
The induction hotplate is not designed to be used
with an external timer or a separate remote control
system.

SilverCrest SIKP 2000 D1
18 - English
6. Before you start
Unpack the device. First check whether all the parts are complete and undamaged. If any items are
missing or damaged, please phone our hotline (see "Guarantee information" on page 24). Keep the
packaging material away from children and dispose of appropriately.
6.1 Introduction to induction cooking
Cooking with an induction hotplate works differently to what you are used to from normal hotplates. The
heat is generated by means of an electromagnetic field in the base of the cooking vessel and not by
means of heat resistors in the heating zone (2). This saves energy and reduces cooking times.
At high power, the content of the cooking vessel is heated much quicker, it also reacts much more quickly
to the temperature being turned down. You could say that using an induction hotplate is very similar to
cooking with gas.
But you do need special induction-compatible cookware with a ferromagnetic base.
6.2 Suitable cookware
Only use ferromagnetic cookware which is suitable for induction hotplates. These should be labelled
accordingly when you buy them. Cookware made of non-magnetic metals (aluminium, copper, etc.) and
other materials (e.g. ceramics, porcelain, glass, etc.) is not suitable.
The base of the cookware must be able to stand flat on the induction hotplate, be smooth and have a
diameter of between 16 and 22cm.
If the cookware is not the right diameter or is made of unsuitable material, the hotplate automatically
switches off. A beeper sounds every 4 seconds and the error E0 is shown on the display (7).
7. Getting started
7.1 Setup and connection
Place the device on an even, non-slip and dry surface.
Risk of fire!

Do not place the device on textile surfaces such as a tablecloth.
 Do not place the device unit on metal surfaces. These can heat up quickly and cause a fire.
 Never place the device under flammable items such as curtains.
 The openings on the bottom of the product must never be covered. Keep a distance of at
least 10 cm clear all around the device and at least 60 cm clear above it to guarantee
sufficient cooling.