Silvercrest SDBB 2400 A1 User manual

STEAM IRON /DAMPFBÜGELEISEN
FER À REPASSER VAPEUR SDBB 2400 A1
IAN 368337_2101
FER À REPASSER VAPEUR
Mode d’emploi
STEAM IRON
Operating instructions
STOOMSTRIJKIJZER
Gebruiksaanwijzing
NAPAŘOVACÍ ŽEHLIČKA
Návod k obsluze
DAMPSTRYGEJERN
Betjeningsvejledning
NAPAROVACIA ŽEHLIČKA
Návod na obsluhu
DAMPFBÜGELEISEN
Bedienungsanleitung
ŻELAZKO PAROWE
Instrukcja obsługi
PLANCHA DE VAPOR
Instrucciones de uso

GB/IE Operating instructions Page 1
DE/AT/ CH Bedienungsanleitung Seite 19
FR/ BE Mode d’emploi Page 37
NL/ BE Gebruiksaanwijzing Pagina 57
CZ Návod k obsluze Strana 75
PL Instrukcja obsługi Strona 93
SK Návod na obsluhu Strana 111
ES Instrucciones de uso Página 129
DK Betjeningsvejledning Side 147
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the
device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit
allen Funktionen des Gerätes vertraut.
Avant de lire le mode d‘emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec
toutes les fonctions de l‘appareil.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het
apparaat.
Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.
Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi
funkcjami urządzenia.
Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.
Antes de empezar a leer abra la página que contiene las imágenes y, en seguida, familiarícese con todas
las funciones del dispositivo.
Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.

MAX
MAX

SDBB 2400 A1 GB│IE │ 1 ■
Contents
Introduction...................................................2
Information about these operating instructions .................................. 2
Copyright............................................................... 2
Intended use ............................................................ 2
Safety information .............................................2
Package contents and transport inspection .........................6
Appliance description...........................................6
Symbols on the appliance .......................................7
Beforefirstuse ................................................7
Filling the water tank ...........................................7
Plugging in and ironing .........................................9
Steam ironing ................................................10
Ironing with steam blast .......................................10
Putting the steam iron down ....................................10
Afteruse ....................................................10
Automatic switch-off ...........................................11
Anti-drip system ..............................................11
Cleaning.....................................................12
Cleaning the housing and soleplate .........................................12
Self-cleaning function.....................................................12
Descaling ....................................................13
Anti-limescale function .................................................... 13
Descaling the steam iron ..................................................13
Storage .....................................................14
Troubleshooting ..............................................14
Technical specifications.........................................15
Disposal .....................................................15
Kompernass Handels GmbH warranty............................16
Service................................................................17
Importer ............................................................... 17

SDBB 2400 A1
■ 2 │ GB│IE
Introduction
Information about these operating instructions
Congratulations on the purchase of your new appliance!
You have chosen a modern, high-quality product. These operating instructions are
part of the product. They contain important information about safety, usage and
disposal. Before using the product, please familiarise yourself with all operating
and safety instructions. This product may only be used as described and for the
purposes indicated. Please also pass these operating instructions on to any future
owner.
Copyright
This documentation is protected by copyright.
Any copying or reproduction, including in the form of extracts, or any repro-
duction of images (even in a modified state), is permitted only with the written
authorisation of the manufacturer.
Intended use
The steam iron is intended exclusively for the ironing of textiles. The iron may only
be used indoors and in private households. Any other use is deemed improper.
The appliance is not intended for use in commercial or industrial environments.
Claims of any kind for damage resulting from misuse, incompetent repairs,
unauthorised modification or the use of unauthorised replacement parts will not
be accepted. The operator bears sole liability.
Safety information
DANGER! RISK OF ELECTRIC SHOCK!
► The voltage of the power source must correspond with the
details given on the type plate of the appliance.
► To avoid potential risks, arrange for a defective appliance to
be checked and possibly repaired by qualified technicians,
or contact our Customer Service Department.
► To prevent accidents, have defective plugs and/or power
cables replaced immediately by an authorised specialist,
our Customer Service or a similarly qualified person.
► When disconnecting the appliance from the power source,
pull only on the plug itself, never on the cable.

SDBB 2400 A1 GB│IE │ 3 ■
DANGER! RISK OF ELECTRIC SHOCK!
► Never bend (kink) or crush the power cable, and always
route it in such a way that it cannot come into contact with
hot surfaces and so that no one can step on or trip over it.
► After every use, before cleaning and when refilling with tap
water, always remove the plug from the mains power socket.
► Always unroll the power cable fully before switching on and
do not use an extension cable.
► Never touch the power cable or the plug with wet hands.
► Never use the steam iron adjacent to water contained in a
bath, shower, wash basin or other vessels. The proximity of
water is hazardous, even if the appliance is switched off.
► Never immerse the steam iron in any liquid or permit liquids
to penetrate into the housing of the steam iron. Do not expose
the appliance to humidity and do not use it outdoors. If any
liquid gets into the housing, disconnect the appliance from the
mains power socket immediately and have it repaired by a
qualified technician.
► Do not open the steam iron housing. Have a defective steam
iron repaired only by an authorised technician.
► Do not use the steam iron if it is visibly damaged, has been
dropped or is leaking water. Have it repaired by qualified
specialists.
► Stop using the appliance if the anti-kink protection on the
power cable is damaged.
► Always pull the plug out of the power socket before filling
the water tank with water.

SDBB 2400 A1
■ 4 │ GB│IE
DANGER! RISK OF ELECTRIC SHOCK!
► This appliance may be used by children aged 8 years or older
and by persons with reduced physical, sensory or mental
capabilities or lack of experience and/or knowledge, if they
are supervised or have been instructed in the safe use of the
appliance and understand the potential risks. Do not allow
children to use the appliance as a toy. Cleaning and user main-
tenance tasks may not be carried out by children unless they
are supervised.
RISK OF INJURY!
Caution, hot surfaces!
► When the steam iron is hot, hold it only by the handle.
► Children should be supervised to ensure that they do not
play with the appliance.
► Never place your hands in the steam spray or on hot metal
parts.
► Do not open the filler opening for the water tank while the
iron is in use. Allow the steam iron to cool down first and
remove the plug from the power socket.
► The iron and its connecting cable must be kept out of
the reach of children under the age of 8 while the iron is
switched on or cooling down.
► This steam iron should only be used and set down on stable
surfaces.
► Place the steam iron only on level and heat-resistant surfaces.
The steam iron must be stable.
► When you want to put the steam iron down, always stand it
on its base.

SDBB 2400 A1 GB│IE │ 5 ■
RISK OF FIRE!
► Never leave a hot steam iron unattended if it is switched on
or connected to the mains power supply.
► Do not put the steam iron away until it has cooled down
completely.
ATTENTION! PROPERTY DAMAGE!
► If the clothing care instructions forbid ironing, ( symbol),
the clothing item may not be ironed. Ignoring this warning
could lead to permanent damage to the clothing item.
► Use only the ironing temperatures stated in the care instruc-
tions as suitable for the material. Otherwise, you could
damage the textiles. If you do not know the correct care
instructions, start with the lowest temperature setting.
► The water tank should only be filled with tap water or distilled
water. Otherwise, you will damage the steam iron.
► Do not clean the steam iron with solvents, alcohol or abrasive
cleaning agents.
They could damage it.
NOTE
► No user action is required to switch the product between
50 and 60 Hz. The product switches automatically to either
50 or 60 Hz.

SDBB 2400 A1
■ 6 │ GB│IE
Package contents and transport inspection
■ Remove all parts of the appliance and the operating instructions from the
packaging.
■ Remove all packaging material and any films and stickers.
Check the contents of the package. The package contents include the following
components (see fold-out page for illustrations):
 Steam iron
 Measuring cup
 Operating instructions
NOTE
► Check the package for completeness and signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result of defective
packaging or during transport, contact the customer service hotline (see
section Service).
Appliance description
(See fold-out page for illustrations)
1Water jet
2Filler opening for the water tank
3Steam control
4Steam blast button
5Spray button
6 Temperature control
7Control lamp
8Power cable with plug and anti-kink protection
9Base
0Soleplate
qSelf clean button
wMeasuring cup

SDBB 2400 A1 GB│IE │ 7 ■
Symbols on the appliance
Symbol Meaning
Power output (2400W)
Continuous steam volume (40g/min)
Ceramic-coated soleplate
Self clean
Automatic switch-off
Before first use
1) Fill the water tank with water (See the section Filling the water tank).
2) Insert the plug into a mains power socket supplying an electrical current
corresponding to that given on the rating plate.
3) Set the steam control 3to the highest level
(maximum steam)
.
4) Turn the temperature controller 6to the highest level max. The control lamp 7
flashes while the appliance heats up. As soon as the set temperature is reached,
the control lamp 7lights up. Wait until the control lamp 7lights up.
5) Press the steam blast button 4a couple of times so that steam comes
out of the soleplate 0.
6) Iron over a piece of scrap material, to remove any production residues that
may remain on the soleplate 0.
Filling the water tank
RISK OF ELECTROCUTION!
► Always disconnect the plug from the mains socket before filling the water
tank. There is a risk of electric shock!
RISK OF INJURY!
► Allow the appliance to cool down before filling the water tank.
Otherwise, there is risk of burns!

SDBB 2400 A1
■ 8 │ GB│IE
ATTENTION! PROPERTY DAMAGE!
► Fill the water tank only with tap water or distilled water. Otherwise, you will
damage the steam iron.
1) Make sure that the
temperature control 6 is set to the position min.
2) Hold the iron in your hand at an angle and open the lid of the filler opening
for the water tank
2.
3) Use the measuring cup wto fill the water tank
2up to no more than
the MAX marking (see fig. 1).
Fig. 1
4) Close the cover of the filler opening for the water tank 2.
NOTE
► If the mains water in your location is rated as hard, we recommend that
you mix the mains water with some distilled water. Otherwise, the jets for
the steam blast function could become blocked with limescale prematurely.
To extend the optimal steam blast function, mix mains water with distilled
water according to the table.
► Ask your local water utility about the water hardness in your area.
Water hardness Ratio of distilled water to tap water
very soft/soft 0
medium 1 : 1
hard 2 : 1
very hard 3 : 1

SDBB 2400 A1 GB│IE │ 9 ■
Plugging in and ironing
ATTENTION! PROPERTY DAMAGE!
► If the clothing care instructions forbid ironing ( ), the garment may not
be ironed. Ignoring this warning could lead to permanent damage to the
clothing item.
NOTE
► Dry ironing without steam is possible at all temperatures. Steam ironing is
only possible from the setting on the temperature control 6.
1) Insert the plug into a mains power socket.
2) Check the care instructions on the labels in garments to see if they are
suitable for being ironed, and at which temperature setting.
3) Select the appropriate temperature setting using the temperature control 6
(see table below and fig. 2).
Temperature control
symbol 6Temperature Material type
70–120C Synthetics
100–160C Silk, wool
140–210C Cotton, linen
Fig. 2
NOTE
► While it is heating up, always place the steam iron on its base 9.
If you place the steam iron down on its soleplate 0and do not move it,
the automatic switch-off will be activated after 30 seconds (see section
Automatic switch-off) and the appliance stops heating up.

SDBB 2400 A1
■ 10 │ GB│IE
■ The control lamp 7flashes while the appliance heats up. As soon as the set
temperature is reached, the control lamp 7lights up.
■ To moisten the laundry, press the spray button 5. This function is suitable
for very dry and very crumpled garments.
Steam ironing
NOTE
► The temperature control 6must be set to at least the setting. Other-
wise, no steam will be produced.
■ Set the steam control 3to the desired steam setting (
= no steam,
=maximum steam).
Ironing with steam blast
NOTE
► The temperature control 6must be set to at least the setting.
Otherwise, no steam will be produced.
To generate the maximum quantity of steam, the steam control3must be
set to the highest level .
► The steam blast function is ideal for smoothing difficult-to-reach parts of a
garment.
1) Raise the steam iron slightly.
2) For a steam blast, press the steam blast button 4.
Putting the steam iron down
WARNING! RISK OF FIRE!
► Never leave a hot steam iron unattended if it is switched on or connected to
the mains power supply.
1) Set the temperature control 6to the min setting.
2) Stand the steam iron only on its base 9.
After use
1) Set the temperature control 6to the min setting.
2) Remove the plug from the mains power socket.
3) Stand the steam iron on its base 9and allow it to cool down completely.
4) Empty the water tank via the filling opening 2 and clean the soleplate 0
(see section Cleaning the housing and soleplate).
5) Place the steam iron back on its base 9.

SDBB 2400 A1 GB│IE │ 11 ■
Automatic switch-off
This steam iron is fitted with an automatic switch-off system. This stops the steam
iron from heating up if it is not moved within a certain amount of time:
■ If the iron is resting on its soleplate 0and is not moved for about 30 sec-
onds, you will hear a warning beep and the control lamp for the automatic
switch-off 7starts flashing. The steam iron will automatically stop heating
up. To deactivate the automatic switch-off, lift up the steam iron and move it
gently from side to side. The steam iron will heat up again.
■ If the iron is on its base 9and is not moved for about 8 minutes, you will
hear a warning beep and the control lamp for the automatic switch-off 7
starts flashing. The steam iron will automatically stop heating up. To deacti-
vate the automatic switch-off, lift up the steam iron and move it gently from
side to side. The steam iron will heat up again.
NOTE
► The automatic switch-off is not intended as a substitute for removing the
plug from the mains power! It is merely intended to reduce the fire hazard if
you forget to switch off the steam iron.
Anti-drip system
The steam iron has an anti-drip system that automatically switches off the steam
blast at low temperatures. If this happens, you will hear a click. You must then set
a suitable temperature with the temperature control 6. As soon as this tempera-
ture is reached, steam production is resumed.
NOTE
► Wait until the set temperature has been reached and the control lamp 7
lights up before pressing the steam blast button 4again. Otherwise,
water may drip from the soleplate 0.

SDBB 2400 A1
■ 12 │ GB│IE
Cleaning
RISK OF ELECTROCUTION!
► Always unplug the appliance before cleaning it.
There is a risk of electric shock!
RISK OF INJURY!
► Allow the appliance to cool down before cleaning it. Otherwise, there is
risk of burns!
Cleaning the housing and soleplate
ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive, aggressive or chemical cleaning agents. They can
damage the surface and also lead to irreparable damage to the appliance.
■ Clean the housing with a soft, dry cloth only.
■ Clean the soleplate 0using a damp cloth and a mild, non-scouring deter-
gent.
Self-cleaning function
1) Fill the water tank to the MAX marking.
2) Insert the plug into the mains power socket.
3) Set the temperature control 6to the max setting.
4) Set the steam control 3to the highest level .
5) Allow the steam iron to heat up until the control lamp 7lights up perma-
nently.
6) Hold the steam iron horizontally over a sink or suitable container.
7) Press and hold down the self clean button q. Move the steam iron back
and forth a little. Steam and boiling water will flow from the steam holes in
the soleplate 0. Any impurities that may be present are flushed out.
8) Release the self clean button qas soon as all of the water in the water tank
is used up.
9) Dry the soleplate 0thoroughly. To do this, move the soleplate 0back and
forth several times over a towel or an old piece of material.
10) Allow the steam iron to cool down before placing it in storage.

SDBB 2400 A1 GB│IE │ 13 ■
Descaling
Anti-limescale function
NOTE
► The iron has an integrated anti-limescale function that reduces limescale
deposits during steam ironing and thus prolongs the life of the steam iron.
However, the anti-limescale function cannot completely prevent the natural
process of limescale build-up.
► To avoid impairing the anti-limescale function, fill the water tank with tap
water or distilled water only.
Descaling the steam iron
NOTE
► The steam iron is designed for use with tap water (for information on using
tap water, see section Filling the water tank). However, it is necessary
to descale the steam chamber regularly with a descaling agent to remove
limescale residues and thus maintain the maximum performance of the
steam iron.
► The frequency of descaling depends on the hardness of the water and how
often the appliance is used.
We recommend descaling at least once every two months or as soon as
you notice that the appliance is generating less steam.
► We recommend using the descaling agent durgol universal bio fast
decalcifier to descale the steam iron.
To descale the steam iron, proceed as follows:
1) Remove the plug from the mains power socket. Make sure that the steam iron
has completely cooled down.
2) Empty the water tank of the steam iron completely into a sink via the filler
opening
2 .
3) Mix 150 ml of tap water with 150 ml of descaling agent (ratio 1:1) and
pour the mixture into the water tank.
4) Allow the solution to work for approx. 30 minutes.
5) Hold the steam iron horizontally over a sink or suitable container.
6) Press and hold down the self clean button q. Move the steam iron back
and forth a little so that the contents of the water tank come out of the steam
holes of the soleplate 0.

SDBB 2400 A1
■ 14 │ GB│IE
7) Release the self clean button qas soon as the amount of water flowing
out of the steam holes on the soleplate 0becomes noticeably less. Empty
the remaining contents of the water tank completely into a sink via the filler
opening 2 .
NOTE
► After descaling the steam iron, always carry out two rinsing cycles using the
self clean button q. Do not use a descaling agent without subsequently
thoroughly rinsing the water tank with tap water.
8) Use the measuring cup wto fill the water tank up to the MAX marking with
tap water and repeat steps 5 to 7 twice. To rinse the water tank thoroughly,
use only tap water for the two rinses.
Storage
■ Store the cooled-down appliance in a clean, dust-free and dry location.
Troubleshooting
Problem Cause Solution
The steam iron blasts
out no steam/very
little steam.
The steam iron’s wa-
ter tank is empty.
Fill the water tank with tap
water (See section Filling
the water tank).
Limescale deposits
reduce the steam
output.
Descale the steam iron (see
section Descaling the
steam iron).
The steam iron does
not get hot.
The steam iron is not
plugged in or is not
switched on.
Insert the plug into a wall
power socket and adjust the
temperature control 6to the
desired ironing temperature.
The steam iron cannot
be switched on.
The steam iron is
defective.
Have the steam iron repaired
by a qualified technician (see
section Service).

SDBB 2400 A1 GB│IE │ 15 ■
Technical specifications
Supply voltage 220– 240 V ∼ (AC), 50/60 Hz
Power consumption 2400 W
Disposal
Never dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU.
Dispose of the appliance via an approved disposal company or your municipal
waste facility. Please comply with all applicable regulations. Please contact your
waste disposal facility if you are in any doubt.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
The product is recyclable, subject to extended producer responsibility and is
collected separately.
The packaging is made from environmentally friendly material and can be
disposed of at your local recycling plant.
Note the labelling on the various materials and separate them for disposal as
required. The materials are labelled with abbreviations (a) and numbers (b)
with the following meanings: 1–7: plastics, 20–22: paper and cardboard,
80–98: composites.

SDBB 2400 A1
■ 16 │ GB│IE
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase. If this product
has any faults, you, the buyer, have certain statutory rights. Your statutory rights
are not restricted in any way by the warranty described below.
Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt in a
safe place. This will be required as proof of purchase.
If any material or manufacturing fault occurs within three years of the date of
purchase of the product, we will either repair or replace the product for you or
refund the purchase price (at our discretion). This warranty service requires that
you present the defective appliance and the proof of purchase (receipt) within
the three-year warranty period, along with a brief written description of the fault
and of when it occurred.
If the defect is covered by the warranty, your product will either be repaired
or replaced by us. The repair or replacement of a product does not signify the
beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty.
This also applies to replaced and repaired components. Any damage and
defects present at the time of purchase must be reported immediately after un-
packing. Repairs carried out after expiry of the warranty period shall be subject
to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict quality guide-
lines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not
extend to product parts subject to normal wear and tear or to fragile parts which
could be considered as consumable parts such as switches, batteries or parts
made of glass.
The warranty does not apply if the product has been damaged, improperly used
or improperly maintained. The directions in the operating instructions for the
product regarding proper use of the product are to be strictly followed. Uses and
actions that are discouraged in the operating instructions or which are warned
against must be avoided.
This product is intended solely for private use and not for commercial purposes.
The warranty shall be deemed void in cases of misuse or improper handling, use
of force and modifications/repairs which have not been carried out by one of
our authorised Service centres.

SDBB 2400 A1 GB│IE │ 17 ■
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
■ Please have the till receipt and the item number (IAN)368337_2101
available as proof of purchase.
■ You will find the item number on the type plate on the product, an engraving
on the product, on the front page of the operating instructions (below left) or
on the sticker on the rear or bottom of the product.
■ If functional or other defects occur, please contact the service department
listed either by telephone or by e-mail.
■ You can return a defective product to us free of charge to the service address
that will be provided to you. Ensure that you enclose the proof of purchase
(till receipt) and information about what the defect is and when it occurred.
You can download these instructions along with many other manuals, product
videos and installation software at www.lidl-service.com.
This QR code will take you directly to the Lidl service page
(www.lidl-service.com) where you can open your operating instructions
by entering the item number (IAN)368337_2101.
Service
Service Great Britain
Tel.: [phone]
E-Mail: [email protected]
Service Ireland
Tel.: [phone]
(0,08EUR/Min.,(peak))
(0,06EUR/Min.,(off peak))
E-Mail: [email protected]
IAN 368337_2101
Importer
Please note that the following address is not the service address. Please use the
service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com