Silvercrest SWKD 2400 A1 Quick guide

V 1.2
English.................................................................................................................2
Česky ................................................................................................................21
Slovenčina ........................................................................................................40
Deutsch .............................................................................................................59

SilverCrest SWKD 2400 A1
2 - English
Table of contents
1. Intended use................................................................................................... 3
2. Package contents ........................................................................................... 4
3. Technical data ................................................................................................ 5
4. Safety instructions .......................................................................................... 5
5. Copyright ..................................................................................................... 11
6. Before initial use........................................................................................... 11
7. Initial use...................................................................................................... 11
7.1. Boiling the water ........................................................................................................................ 12
8. Maintenance/cleaning.................................................................................. 15
8.1. Descaling the pot (3) ................................................................................................................. 15
8.2. Cleaning the limescale filter (2) ................................................................................................ 16
8.3. Storing the device when not in use ........................................................................................... 17
9. Troubleshooting ........................................................................................... 17
10. Environmental and waste disposal information.......................................... 18
11. Marks of conformity................................................................................... 18
12. Warranty information ................................................................................ 19

SilverCrest SWKD 2400 A1
English - 3
Congratulations!
By purchasing the SilverCrest SWKD 2400 A1 wireless, digital kettle, hereinafter referred to as
kettle, you have opted for a high quality product.
Familiarise yourself with the kettle before using it for the first time and read these operating
instructions carefully. Observe the safety instructions and only use the kettle in the manner described
in these operating instructions and for the indicated fields of application.
Keep these operating instructions in a safe place. Hand over all documents in the event that you
pass on the kettle to a third party.
1. Intended use
This kettle is a household device and is only intended for heating water. It must not be used outside
of closed rooms or in regions with a tropical climate. The kettle is not intended for business or
commercial use. Use the kettle solely for private purposes in living areas; any other use is deemed
improper. The kettle meets the requirements of all relevant standards related to CE conformity.
Compliance with these standards is no longer guaranteed if a change is made to the kettle without
the authorisation of the manufacturer. The manufacturer shall not be liable for any damages or
faults arising as a result. Only use the accessories provided by the manufacturer.
Please observe the national regulations and/or laws of the country in which the body trimmer is
used.

SilverCrest SWKD 2400 A1
4 - English
2. Package contents
Unpack the kettle and all of the accessories. Remove all packaging materials and check all of the
components for completeness and signs of damage. If any parts are missing or damaged, please
contact the manufacturer.
SilverCrest SWKD 2400 A1 digital kettle
Device base
These operating instructions
These operating instructions also have a cover that can be unfolded. The inside of the cover
provides a schematic of the SilverCrest digital kettle SWKD 2400 A1 and all controls. This cover
page can remain unfolded while you read other sections of the operating instructions. This provides
you with a reference to the controls at all times. The numbers identify the following parts/functions:
1 Lid release button
2 Limescale filter
3 Pot
4 Water level gauge
5 Base (with integrated cable rewind)
6 Power cable
7 Handle
8 Keep-warm button
9 On/off button
10 + button
11 - button
12 Display
13 Lid

SilverCrest SWKD 2400 A1
English - 5
3. Technical data
Manufacturer TARGA GmbH
Designation SilverCrest SWKD 2400 A1
Power supply 220–240 V~, 50/60 Hz
Power consumption 2,000–2,400 W
Length of power cable (6) 75 cm
Capacity 0.5 (minimum) to 1.7 (maximum) litres
Display indicators Status display when pot (3) is switched on
Protection class I
Dimensions (H x W x D) Approx. 264 x 153 x 234 mm (total)
Weight Approx. 1,050 g (total)
The specifications and design are subject to change without notice.
4. Safety instructions
Before using the device for the first time, please read the
following instructions carefully and observe all warnings, even if
you are familiar with using electronic and household devices.
Keep these operating instructions in a safe place for future
reference. If you give the device away or sell it, please ensure
that you also pass on this manual. They are part of the device.
Explanation of symbols used
DANGER! This icon, together with the word
‘Danger’, indicates an impending dangerous
situation that, if not prevented, can lead to serious
injuries or even death.

SilverCrest SWKD 2400 A1
6 - English
WARNING! This icon indicates important
information for the safe operation of the kettle and
user safety.
DANGER! This icon indicates impending danger
to health due to an electric shock, which may result
in a risk of death and/or damage to property.
DANGER! This icon indicates impending danger
of scalding.
This icon indicates products that have been tested
in relation to their physical and chemical
composition and that in accordance with EC
1935/2004 have been regarded as harmless to
health in terms of contact with foodstuffs.
This icon indicates that the base (5) and the
underside of the pot (3) need to be kept away
from water.
This icon indicates that further information on the
topic is available.
Foreseeable misuse
Only heat the pot (3) with the base (5) developed for this
purpose. Do not under any circumstances place it on a hob
to heat it and do not use the base of any other kettle.
Do not use the pot (3) for other liquids; only use it for
drinking water.

SilverCrest SWKD 2400 A1
English - 7
Always use fresh drinking water. Do not drink water that has
been in the pot (3) for longer than an hour. Do not reheat
water that has cooled down. Always pour away old water.
Otherwise germs may form.
The kettle should not be operated with an external timer or a
separate remote control system.
Children and people with disabilities
This device may be used by children aged eight and over
and by people with reduced physical, sensory or mental
abilities or who lack experience and knowledge, provided
that they are supervised or have been instructed in the safe
use of the device and understand the resulting dangers.
Children must not play with the device.
Cleaning and maintenance by the user may not be
performed by children, unless they are over eight years of
age and supervised.
Children under eight years of age are to be kept away from
the device and the power cable (6).
DANGER! The packaging material is not a toy.
Children must not play with the plastic bags. There
is a risk of suffocation.
Store the appliance out of reach of children.

SilverCrest SWKD 2400 A1
8 - English
General safety instructions
DANGER of burn injuries
Never touch the housing of the pot (3) during and
immediately after operation. Only use the handle (7) to hold
or carry the pot (3).
Hot steam is released when the water boils. Make sure not to
burn yourself. Wear an oven glove, if necessary. Turn the pot
(3) so that the steam is directed away from you.
Only clean the pot (3) once it has cooled down completely.
Fill the pot (3) with a maximum of 1.7 litres of water. Refer to
the water level gauge (4). If you pour in too much water, it
can boil over and cause burn injuries and damage to
property.
Only boil the water with the lid (13) closed. Otherwise water
can escape and cause burn injuries and damage to property.
Do not open the lid (13) while the water is being heated.
WARNING of damage to property
Only use the pot (3) with the corresponding base (5).
Do not put any objects on the base (5).
Only operate the kettle on a flat, stable and fire-proof
surface. If the kettle is not placed on a level surface, it can tip
over due to the movement of the boiling water and cause

SilverCrest SWKD 2400 A1
English - 9
damage to property and under certain circumstances may
also cause burn injuries.
Never leave the kettle unattended when in use.
Unplug the plug from the socket when the kettle is
unattended.
DANGER of electric shock
The power cable (6) must not be damaged. Never replace a
damaged power cable (6). Instead contact the service
department (see ‘Warranty information’ section). If the
power cable (6) is damaged, there is a risk of electric shock.
Never open the housing of the base (5), as this does not
contain any parts to be maintained. If the housing is open,
there is a risk of electric shock.
If you notice any smoke, unusual noises or smells, switch off
the kettle immediately and remove the plug from the socket. If
this happens, you must stop using the kettle until it has been
checked by a specialist. Do not inhale smoke possibly
caused by a burning device. If you have inhaled smoke,
consult a physician. Inhaling smoke can be harmful to your
health.
Ensure that the power cable (6) cannot be damaged by
sharp edges or hot surfaces. Always wrap the power cable
(6) around the cable rewind under the base (5) after use.

SilverCrest SWKD 2400 A1
10 - English
Ensure that the power cable (6) is not jammed or squashed.
The device must always be disconnected from the mains if left
unattended, prior to assembly and disassembly or cleaning.
Never remove the plug from the socket by pulling the power
cable (6); only ever pull the plug.
If you find visible damage on the kettle or the power cable
(6), switch off the kettle immediately, remove the plug from
the socket and contact the service department (see
‘Warranty information’ section).
Only plug the base (5) into a power socket that is properly
installed and easily accessible and whose mains voltage
corresponds with the rating plate specifications. Following
connection, the power socket must continue to be easily
accessible so that the plug can be quickly removed in an
emergency.
Never immerse the base (5) in water or any other liquid. If
liquid enters into the base (5), remove the plug from the
socket and contact the service department (see ‘Warranty
information’ section).

SilverCrest SWKD 2400 A1
English - 11
DANGER of fire
Fill the pot (3) with a minimum of 0.5 litres of water. If you do
not pour in enough water, there is a risk of fire due to
overheating.
Keep the kettle at least 50 cm away from flammable and
combustible materials. There is a risk of fire.
5. Copyright
All contents of these operating instructions are subject to copyright law and are provided to the
user solely as a source of information. Any form of copying or reproduction of data and information
without the express written permission of the author is prohibited. This also concerns commercial use
of the content and data. The text and illustrations correspond to the technical standards at the time
of printing. Subject to alterations.
6. Before initial use
Remove the kettle and all accessories from the packaging and check the completeness of the
delivery. Remove the protective film. Keep the packaging material away from children and dispose
of it in an environmentally-friendly manner.
7. Initial use
Before you prepare water for consumption for the first time, you must first clean the pot (3) in order
to remove dust and any remnants of the packaging material. Proceed as follows to clean the pot:
1. Open the lid (13) by pressing the lid release button (1) and rinse the pot (3) with clear water.
2. Fill the pot (3) with drinking water up to ‘1.7 l MAX’ on the water level gauge.
3. Close the lid (13) by pressing it down until it snaps into place. Boil the water once (see ‘Boiling
the water’ section) and pour it away.
Repeat steps 1–3. The pot (3) is now clean and disinfected. You can now use the pot (3).

SilverCrest SWKD 2400 A1
12 - English
7.1. Boiling the water
DANGER of electric shock
Keep the base (5) away from water. There is danger of electric shock.
WARNING
Boil the water and pour it away twice before you use the kettle for the first time
(see the previous section on ‘Initial use’).
WARNING
Always use fresh drinking water. Do not drink water that has been in the pot (3)
for longer than an hour. Do not reheat water that has cooled down. Always
pour away old water. Otherwise germs may form.
Water should not be kept in the pot for longer than an hour, especially when
you are using the keep-warm function at low temperatures, since there is a high
risk of germs forming at these temperatures.
Cable rewind
An integrated cable rewind is located
on the underside of the base (5). You
can adapt the length of the power
cable (6) to the conditions at the
location in which you are using the
kettle.
You can minimise the length of the
cable when you are not using the
kettle.
Unwind the power cable (6) on the underside of the base (5).
Place the base (5) on a flat, non-slip and dry surface. Make sure that the power cable (6)
passes through the opening on the underside of the base (5). This is to ensure that the kettle is
positioned securely.
WARNING
If the power cable (6) does not pass through the opening on the underside of
the base (5), the base (5) and pot (3) are not positioned securely. The
movement of the boiling water can make the kettle tip over and cause serious
damage to property and cause injuries!
Open the lid (13) by pressing the lid release button (1).

SilverCrest SWKD 2400 A1
English - 13
Fill the pot (3) with drinking water up to a minimum of ‘0.5 l MIN’ and a maximum of ‘1.7 l
MAX’ on the water level gauge (4) and close the lid (13) by pressing it down until it snaps into
place.
You can freely rotate the pot (3) around its vertical axis when you place it on
the base (5). The pot does not need to be locked into a particular position. This
way, you can turn the pot (3) so that the water level gauge (4) easy to see or
to direct the steam away from you.
Plug the connector into a power socket, which is always easily accessible.
Place the pot (3) onto the base (5).
Press the on/off button (9) in order to switch on the pot (3). The number 100 flashes in the
display (12), indicating the target temperature of 100°C, and the heating process begins. You
can adjust the target temperature in increments of 5°C between 40°C and 100°C by pressing
the (11) or (10) buttons. You can stop the heating process at all times by pressing the
on/off button (9).
Otherwise, you can also proceed as follows: Select the desired target temperature by pressing
the (11) or (10) buttons and then press the on/off button (9) in order to start the
heating process.
The kettle is illuminated and the selected target temperature flashes on the display when the
water is being heated. Furthermore, the kettle makes a noise. The noise is not due to a
malfunction.
DANGER of burn injuries
Turn the pot (3) so that the steam is directed away from you. Otherwise you
could burn yourself.
Only boil the water with the lid (13) closed. Otherwise the pot (3) can tip over
and cause burn injuries and damage to property.
As soon as the water reaches the selected target temperature, this continuously flashes in the
display (12).
If the keep-warm function is not activated, the display (12) automatically switches off after approx.
three minutes.
The keep-warm function allows you to keep heated water at a certain temperature for a longer
period of time. As soon as the water temperature in the pot (3) drops by a certain level below the
selected target temperature, the pot automatically begins heating again to the selected
temperature. The keep-warm function only works for a temperature range of 40°C to 90°C.

SilverCrest SWKD 2400 A1
14 - English
Press the keep-warm button (8) in order to activate the keep-warm function for the selected
target temperature. You can also adjust this target temperature to a value between 40°C and
90°C in increments of 5°C by pressing the (11) or (10) buttons. The icon flashes
next to the degree sign on the right side of the display (12) when the keep-warm function is
activated. The display (12) is lit up in blue and the selected target temperature flashes while the
water is being heated. As soon as the water reaches the selected target temperature, this
continuously flashes in the display (12). You can deactivate the keep-warm function at all times
by pressing the on/off button (9) or the keep-warm button (8). The keep-warm function
lasts for a maximum of two hours. The pot (3) then automatically switches off.
As soon as the pot (3) is lifted off the base (5), the pot automatically switches off and the
display (12) goes out.
Pull out the power cable (6) plug from the socket after the heating or keep-warm process is
complete. Remove the pot (3) from the base (5) and pour away the water.
DANGER of burn injuries
Never touch the housing of the pot (3) during and immediately after operation.
Only use the handle (7) to hold or carry the pot (3).
Hot steam is released when the water boils. Make sure not to burn yourself.
Wear an oven glove, if necessary. Turn the
pot (3) so that the steam is directed away from you.

SilverCrest SWKD 2400 A1
English - 15
8. Maintenance/cleaning
DANGER of burn injuries
Wait until the pot (3) has cooled down completely before cleaning it.
Otherwise you could burn yourself.
DANGER of electric shock
Always remove the plug from the power socket before cleaning commences.
Otherwise, there is a risk of electric shock.
Do not pour or spray any liquids onto the base (5) or immerse it into water or
any other liquids. Otherwise, there is a risk of electric shock and a fire hazard
due to short circuits.
WARNING of damage to property
Do not use any scratching or abrasive cleaning agents or abrasive objects
(such as a metal scourer) for cleaning purposes. Otherwise the kettle may be
damaged.
Rinse the inside of the pot (3) with clear water.
Clean the outer surfaces of the pot (3) or base (5) with a slightly damp cloth. Use some
washing up-liquid on the damp cloth for stubborn stains. Make sure to remove any detergent
residue from the pot (3) and base (5) before using the kettle again. Dry the pot (3) and base
(5) thoroughly before the next use.
You can use a cleaning or bottle brush with a long handle to remove stubborn
stains from inside the pot (3).
When cleaning the bottom plate of inside the pot, add some lemon juice inside
the pot (3) to remove stubborn stains more easily.
8.1. Descaling the pot (3)
Limescale may build up in the pot (3) over time. This can lead to loss of energy and shorten the
pot’s (3) service life. You should therefore remove the limescale as soon as it becomes visible.
Use a descaling agent that is used for coffee machines and other household devices. Proceed
as described in the instructions for the descaling agent.
Rinse the pot (3) with plenty of clear water several times after descaling it.

SilverCrest SWKD 2400 A1
16 - English
8.2. Cleaning the limescale filter (2)
A limescale filter (2) is installed in the pot (3). You should clean the limescale filter from time to time.
Empty the pot (3) and make sure it has cooled down.
Proceed as follows to clean the limescale filter (2):
Remove the cooled down pot (3) from the base (5).
Open the lid (13) by pressing the lid release button (1).
To remove the limescale filter (2), reach carefully
into the pot (3) with your hand as shown in the
diagram. Place your thumb from above into the
spout and press the catch (C) on the upper end of
the limescale filter (2) downwards and towards the
inside of the pot. Grip the angled tab (A) on the
limescale filter (2) with your other fingers. Pull the
lower edge (B) of the limescale filter (2) away from
the housing of the pot and remove the limescale
filter (2) from the pot (3).
After cleaning, first place the lower edge (B) of the
limescale filter (2) against the lower end of the
spout from inside the housing of the pot. Grip the
limescale filter (2) by the angled tab (A) and press
it towards the spout until the catch (C) snaps into
place.
Close the lid (13) by pressing it down until it snaps into place.

SilverCrest SWKD 2400 A1
English - 17
8.3. Storing the device when not in use
If the kettle will not be used for a longer period of time, store it in a clean and dry place.
Let the pot (3) cool down fully before you store it.
Wrap the power cable (6) around the cable rewind under the base (5) and store the kettle in a
safe, dust-free place.
9. Troubleshooting
If your kettle does not work as usual, use the following instructions to try and solve the problem. If
working through the following tips does not eliminate the fault, please contact our hotline (see the
‘Warranty information’ section).
The kettle is not working
The plug is not inserted. Insert the plug into the power socket.
The power socket is faulty. Try the appliance in another power socket which definitely works.
The pot (3) is not switched on. Press the on/off button (9) in order to switch on the pot (3).
The pot (3) has overheated and the overheating protection is preventing the device from
switching on. Wait until the pot (3) has cooled down completely. Fill the pot (3) with at least
0.5 l of water (up to the ‘0.5 l MIN’ mark).
The pot (3) is not properly placed on the base (5). Place the pot (3) on the base (5) properly
and press the on/off button (9) in order to switch on the pot (3).
The target temperature can only be set to a maximum of 90°C when using the
keep-warm function.
This does not indicate that the kettle is defective. The temperature range of the keep-warm
function is 40°C to 90°C.

SilverCrest SWKD 2400 A1
18 - English
10. Environmental and waste disposal information
Devices marked with this symbol are subject to European Directive 2012/19/EU.
Electrical and electronic devices may not be put in the household waste, but must
be disposed of via designated public disposal centres. By properly disposing of the
old device, you can avoid environmental damage and hazards to health. Further
information regarding proper disposal of the old device can be obtained from your
local authority or the shop where you purchased the device.
Make sure the packaging is disposed of in an environmentally friendly manner. Cardboard
packaging can be put out for waste-paper collection or taken to public collection points for
recycling. The plastic packaging used for your device is collected by your local waste management
company and disposed of in an environmentally-friendly manner.
11. Marks of conformity
This device conforms to the fundamental requirements and other relevant
regulations of the Low-Voltage Directive 2014/35/EU, the EMC Directive
2014/30/EU and the R&TTE Directive 2009/125/EC as well as the RoHS
Directive 2011/65/EU.
In order to obtain the full EU Declaration of Conformity, send an e-mail to the following email
address:
[email protected]