Silverline 4226 User manual

4226
Please Read The User Manual Carefully!

2
1 Safety instructions 4
1.1 Operating instructions 4
1.2 Instructions employed 4
1.3 Children, persons with special needs 5
1.4 Intended use 5
2 Unpacking and assembly 7
2.1 Unpacking 7
2.2 Assembly and electrical connection 7
3 Operation 13
3.1 Performance level select fan 13
3.2 Automatic trailing system 13
4.1 General maintenance instructions 15
4.5 Maintenance intervals 19
4 Malfunctions 20
5 Malfunctions/Causes/Solutions 21

3
Overv�ew of extract�on hood
F�gure 1: Overv�ew 1 Motor box
2 Power plug
3 Cover hous�ng
4 L�ght�ng
5 S�de suct�on-plate �s removable.
7 L�ght d�odes of hood remote control
1
2
3
4
5
6
7

4
Read through these operat�ng �nstruct�ons
completely before work�ng w�th the extract�on
hood.
Store these operat�ng �nstruct�ons carefully.
When forward�ng the equ�pment to a th�rd
party, del�ver the operat�ng �nstruct�ons.
It �s �mperat�ve to respect �nstruct�ons to avo�d
�njur�es to persons and damage to equ�pment.
No l�ab�l�ty �s assumed of the manufacturer
for damages ar�s�ng from non-compl�ance of
these operat�ng �nstruct�ons.
Important �nstruct�ons for your safety are spe-
�nstruct�ons to avo�d acc�dents and damage to
equ�pment.
1 Safety �nstruct�ons
WARNING!
Warns of r�sks to health and shows potent�al
r�sks of �njury.
CAUTION!
Ind�cates the dangers of the dev�ce or other
objects
CAUTION!
Ind�cates a potent�al danger, wh�ch can lead to
mater�al damage �f �t �s not avo�ded.
INSTRUCTION!
Shows t�ps and �nformat�on.
Refers to another chapter, a sect�on or �nst-
ruct�on.
1.1 Operat�ng �nstruct�ons
1.2 Instruct�ons employed

5
1 Safety �nstruct�ons
Persons (�nclud�ng ch�ldren), who are not ca-
pable of us�ng the equ�pment safely (persons
w�th spec�al needs) due to mental, phys�cal or
motor capac�t�es, may not use the equ�pment
w�thout the superv�s�on or only w�th the �nst-
ruct�ons of a competent person.
Do not leave the equ�pment unattended. Use
�s only w�th greatest caut�on when ch�ldren
or persons w�th spec�al needs, who cannot
assess the r�sks correctly, are �n the v�c�n�ty.
Packag�ng mater�al:
- not used for games. There are
R�sk of suffocat�on.
-Appropr�ate packag�ng mater�al
d�spose of ( spare parts and d�sposal).
The extract�on hood �s only �ntended for
clean�ng of cook�ng vapours r�s�ng from
the cook�ng s�te and for pr�vate use �n the
household.
- Only use the equ�pment �n the household.
-The equ�pment �s not �ntended for commer-
c�al
use.
- Extract�on hood only for the use over
electr�cal or gas cook�ng s�tes.
-Any other use �s not cons�dered as
cond�t�onal and �s proh�b�ted.
In part�cular, refra�n from:
- Operat�ng the extract�on hood w�thout the
to mass�ve grease accumulat�on �n the extrac-
t�on hood and the exhaust ducts.
- Flames under the extract�on hood. It
may result �n �gn�t�on of the grease accumu-
lat�on
.
-The operat�on of the cook�ng pot (all types of
heat�ng: gas, electr�c�c, etc.) w�thout
cookware.
1.3 Ch�ldren, persons w�th spe-
c�al needs
1.4 Intended use

6
1 Safety �nstruct�ons
�n the extract�on hood.
- Clean�ng the extract�on hood w�th
unapproved means or
equ�pment, e. g. w�th a steam cleaner
( Ma�ntenance).
- Repa�rs by an
unauthor�sed person ( Customer ser-
v�ce).
WARNING!
R�sk of combust�on Combust�on may result
dur�ng faulty operat�on of the extract�on
hood.
-Ma�ntenance and clean�ng �nstruct�ons are
correctly compl�ed w�th ( 4.6 Ma�ntenance
�ntervals).
Bas�cally refra�n from:
- cook, roast and gr�ll w�th open
In the case unauthor�sed personnel �nter-
vene, warranty and guarantee cla�ms exp�re (
Warranty)
1.7 Defect�ve equ�pment
WARNING!
Electr�c shock The extract�on hood �s opera-
ted w�th electr�c�ty. If the assembly, handl�ng
and operat�on are wrong, �t can result �n
severe or fatal �njury. Observe safety �nstruc-
t�ons.
1.6 Power supply
CAUTION!
Do not �nstall or operate a defect�ve extrac-
t�on hood. Repa�rs are performed by spec�a-
l�sed personnel author�sed by the manufactu-
rer ( Customer serv�ce).

7
2 Unpack�ng and assembly
The packag�ng mater�al �s recyclable. Save
the raw mater�al and reduce the volume of
waste. Resupply package �n the mater�al cyc-
le. Your techn�c�an w�ll revoke the packag�ng.
( 6.2 D�sposal).
Observe the safety �nstruct�ons for the as-
sembly and electr�cal connect�on ( Safety
�nstruct�ons). Read the assembly �nstruct�ons
completely before assembl�ng.
It �s �mperat�ve to respect �nstruct�ons to
avo�d �njur�es to persons and damage to
equ�pment.
No l�ab�l�ty �s assumed of the manufacturer
for damages ar�s�ng from non-compl�ance of
these assembly �nstruct�ons.
2.1 Unpack�ng
2.2 Assembly and electr�cal con-
nect�on
2.3.1 Test�ng the extract�on hood
parts
These cons�st of:
- Extract�on hood w�th motor box
Accessor�es:
- 10 screws and washers

8
2.3.2 General �nformat�on on
assembly
WARNING!
R�sk to l�fe due to damage of supply l�nes. Du-
r�ng bor�ng, supply l�nes (electr�c�ty, gas and/
or water l�nes) can be damaged. Before bor�ng
be �nformed of the route of the supply l�nes (e.
g. w�th a search tool for metal and l�v w�res).
2 Unpack�ng and assembly
mounted at the surface �n the centre over the
cooktop.

9
2.3.3 Assembly d�agrams
F�gure M3
F�gure
M2a
F�gure M1
F�gure
M2b
2 Unpack�ng and assembly

10
2 Unpack�ng and assembly
2.3.4 Preparat�ons for hood as-
sembly
-They requ�re a ce�l�ng sect�on w�th a stable
wooden frame made of square t�mber or the
l�ke.
The sect�on d�mens�ons are:
Vega �nter�or: 1000 mm
(VGID 104) 958 mm x 656 mm
Vega �nter�or: 1200 mm
(VGID 124) 1158 mm x 656 mm
-They can connect the exhaust a�r �n all d�rec-
motor box, you br�ng the a�r vents w�th a Ø
of 150 mm �n the des�red d�rect�on to the wall
sleeve or other part.
- Before �nstall�ng the hood, transfer and jo�n
the exhaust duct w�th a d�ameter of 150 mm
up to the wall sleeve or other part
1. Ce�l�ng sect�on
2. Exhaust a�r duct connect�on
d�rect�on
3. Installat�on of the exhaust a�r
duct from the hood to the wall slee-
ve or the l�ke

11
2 Unpack�ng and assembly
2.3.5 Assembl�ng the extractor
hood / w�ndow toggle
-At the hood, fold down the s�de suct�on
M2a + M2b).
- For �nstallat�on �n the ce�l�ng, l�ft the hood
up to the ce�l�ng, connect the exhaust duct
the power plug to the power supply, and then
the hood further upwards �n the ce�l�ng. Screw
the lateral plate to the prepared wooden
frames.
CAUTION!
Do not �nstall or operate a defec-
t�ve extract�on hood. Repa�rs are
performed by spec�al�sed personnel
author�sed by the manufacturer
( Customer serv�ce).
F�gure 2: Electron�c box
Emergency
sw�tch
Power supply
On/off
Cable
External motor

12
In the hood compart, a luster term�nal w�th �n-
serted cable br�dge �s �nstalled �n asmall black
box ( F�g. 3.2). Open the box, �n wh�ch you
press together and remove the l�d at the
long s�des
Screw off and remove the cable br�dge. Lead
the cable of the w�ndow toggle through one
of the adjust�ng hole, plug �n and screw on �n
the empty luster term�nals Return the l�d of the
box.
Prepared connect�on for a
w�ndow toggle w�th cable con-
nect�on
2
1
F�gure 3.1: Connect�on
w�ndow toggle
2 Unpack�ng and assembly
2.3.5 Assembl�ng the extractor
hood / w�ndow toggle
2.3.6 Lock�ng the front plate
The front plate of your head-free extract�on
hood �s held w�th 2 safety catches, wh�ch are
attached to the equ�pment. A system w�th and
ball and spr�ngs, the tens�on of wh�ch can be
adjusted w�th 2 screws per safety catch.
Should the front plate of your hood not or not
u�te rema�n closed when be�ng shut, regulate
the tens�on of the safety catch w�th ascrewdr�-
ver.
wercsdaeh-dettolsrewoldnareppuehT
(A +B) of each safety catch, to follow arota-
t�on. Should the front plate st�ll rema�n closed
�ncorrectly, repeat the procedure.
If the front plate �s closed too t�ghtly, sl�ghtly
loosen the screws aga�n.
2
1
1

13
3 Operat�on
3.1 Remote control
3.2 Select�ng the performance
stage of the fan
Th�s extract�on hood �s adjustable w�th the
accompany�ng remote control.
The symbols match the symbols
on the operat�ng surface of the hood
- Sw�tch on or off the hood
- or
Adjust the runn�ng stage w�th -
-Th�s button �s not used
- Adjust automat�c tra�l�ng system for 15
m�nutes
For th�s purpose:
Press the button for several seconds.
F�gure 4: Remote control
INSTRUCTION!
Sw�tch on the fan of the extract�on hood
dur�ng operat�on of the cooktop. Cook�ng
and roast�ng vapours are suct�oned off �n
an opt�mal manner. Follow�ng the sw�tch-off
of the cooktop, run the fan for about 10 - 15
m�nutes (automat�c tra�l�ng system).
3
3
4
32
1
(1)
(2)
(3)
(4)

14
3 Operat�on
3.2.2 Automat�c tra�l�ng system
When operat�ng the extract�on hood, select
the performance level of the fan. Adjust the
performance level of the cook�ng and roast�ng
vapours that ar�se.
For th�s purpose:
- Press the button of the remote control
(stage 2)
Press the button aga�n, the fan motor sw�t-
ches off.
- Press the button, the power of the
fan motor �s decreased
- Press the button, the power of the
fan motor �s �ncreased
-You �dent�fy the adjusted power
level at the l�ght d�odes at the
central console of the hood
( F�gure 4).
The automat�c tra�l�ng system fac�l�tates the
rema�n�ng smell and res�dual mo�sture st�ll �n
the k�tchen for 15 m�nutes to be removed after
adjustment.
- press the button for about 5 seconds
w�th the motor runn�ng. The automat�c tra�l�ng
sstem �s adjusted.
-The bl�nk�ng of the l�ght d�ode of the adjus-
ted runn�ng stage shows that the automat�c
tra�l�ng system �s act�vated.
At the end of the runn�ng per�od of 15 m�-
nutes, both the motor and the l�ght�ng are
automat�cally sw�tched off.
You can also end the adjusted automat�c
tra�l�ng system
manually prematurely. Use the button or
press
2
3
1
1
2
2
3
3.2.1 Performance level
Select fan
F�gure 4: L�ght d�ode central console

15
3 Operat�on
3.2.3 Automat�c safety shutdown
3.2.4 Emergency d�sconnect�on of the
equ�pment
After 4 hours of un�nterrupted operat�on of the
hood or/and l�ght�ng that �s sw�tched on, the
hood �s automat�cally sw�tched off.
Located above the r�ght rear metal grease
a black box w�th the emergency d�sconnector.
To act�vate th�s emergency d�sconnector, you
( F�g.2). Then t�lt the sw�tch to the pos�t�on
0 and the hood has no power.
3.2.5 BOOST performance level The max�mum performance level �s a boost
level.
If th�s �s adjusted, �t bl�nks �n the �nd�cator
The boost mode �s now act�ve, �.e. after 7
m�nutes of runn�ng, the motor automat�cally
sw�tches �n the lower runn�ng stage.
In the act�ve boost stage, the automat�c tra�-
l�ng system cannot be sw�tched on.
4.1 General ma�ntenance �nstruc-
t�ons
CAUTION!
Damage to the hood compartment w�th �n-
correct clean�ng It can lead to d�scolourat�on
of the surfaces. No steam cleaner �s used
to clean the hood compartment. Aggress�ve
clean�ng agents, such
as v�negar-based clean�ng agents, scour�ng
agents, fr�ct�onal granulates or po�nty objects
may not be used.

16
4 Ma�ntenance
INSTRUCTION!
The extract�on hood �s regularly ma�nta�ned
and cleaned to guarantee safety, funct�on
and performance.
Clean the extract�on hood d�rectly after �nstal-
lat�on and later when �t �s contam�nated.
CAUTION!
steel surface can lead to sta�ns. It �s �m-
perat�ve to bas�cally clean the surface of
the extract�on hood after assembly (
�nstruct�ons are shown below).
Observe the follow�ng general clean�ng and
ma�ntenance �nstruct�ons (also appl�es for
pa�nted glass surfaces):
- Before clean�ng, put down r�ngs, clocks and
jewellery �n order not to sratch the pa�nted
surfaces
�nadvertently.
-Always clean the large surface to
avo�d spotty chafe marks.
- Do not rub too strongly on the mater�al,
so that no scratches and matt s�tes
can occur.
- Do not use any abras�ve or sharp
clean�ng agent or pol�sh�ng
agent. Ingred�ents can attack the
mater�al.
-Attent�on when us�ng the
sponges or cloths Due to
res�dues, scratches may occur.
4.2 Clean�ng the extract�on
hood
4.2.1 Clean�ng and ma�nte-
nance �nstruct�ons

17
4 Ma�ntenance
For the ma�ntenance of sta�nless steel sur-
face, spec�al sta�nless steel care agents are
su�table.
( �nstruct�ons are shown below). There �s
and fac�l�tates any further care.
Sta�nless steel surfaces
INSTRUCTION!
For the ma�ntenance of sta�nless steel sur-
face, we recommend the sta�nless steel care
spray, S�lverl�ne �tem no. PS 500 ( 6.1).
CAUTION!
ma�ntenance and clean�ng �nstruct�on are to
be followed.
- Soak up and dry fresh drops or sta�ns (e.g.
from ac�d�c l�qu�ds, such as
fru�t ju�ces) �mmed�ately w�th a cloth
subsequently
- Do not pull hot, hard and sharp-edged
objects over pa�nted surfaces
or bump aga�nst these surfaces.
CAUTION!
Due to frequent clean�ng or when us�ng
aggress�ve clean�ng agents, th�s may lead to
clean�ng only, use su�table clean�ng agent
(e.g. d�shwash�ng detergent).

18
4 Ma�ntenance
For th�s purpose:
r�ns�ng water �s soaked well and
cleaned w�th a soft brush. Repeat
the procedure, �f necessary.
- r�nse well w�th hot water and dry.
- Should the result be unsat�sfacto-
ry, repeat the procedure. The metal
-
washers( �nstruct�ons are shown.
below).
4.4 Remov�ng and
INSTRUCTION!
INSTRUCTION!
-
washers and can be cleaned w�th a pro-
gramme up to a max�mum of 55°C. Due to
potent�al grease depos�ts on the cookware,
water. Changes of colour on the metal grea-
reasons for compla�nt.
- Loosen the s�de suct�on plate from the
lock�ng mechan�sm and fold downwards (rear
h�nges prevent �t from fall�ng out)
( F�gure 5).
- Press the handle str�p of the metal grease
- For reset, dry
-
wards �n the frame and let the handle str�p
the cl�ps are correctly locked.
CAUTION!
Due to frequent clean�ng or when us�ng
aggress�ve clean�ng agents, th�s may lead to
For clean�ng only, use su�table clean�ng
agent (e.g. d�shwash�ng detergent).

19
4 Ma�ntenance
CAUTION!
Power damage when the ma�ntenance �nterval
�s not compl�ed w�th. Due to excess�veuse, the
w�th grease and d�rt part�cles can be clogged,
�n wh�ch the funct�onal�ty of the extract�on
hood �s severely affected. Therefore, the
ma�ntenance �ntervals must be met.
4.5 Ma�ntenance �ntervals
What T�me Work
Clean the metal grease every 1 - 2 weeks or when there
�s d�scolourat�on due to grease
depos�ted
Clean the metal
4.4)
4.6 Replac�ng the l�ght source
WARNING!
R�sk of short when replac�ng the l�ght
sources. The extract�on hood �s operated
w�th electr�c�ty. To replace the l�ght source,
�nterrupt the power supply

20
4 Ma�ntenance
4.6 Replac�ng the l�ght source Halogen l�ghts 3W/230V w�th the socket
GU10 (bajonet connect�on).
For th�s purpose:
next to the defect�ve l�ght source.
The halogen l�ght �s �nstalled and �nserted �n
clamps. Sl�ghtly loosen the knurled screws
clamps and attach the knurled screws.
CAUTION!
�mperat�ve to �nterrupt the power supply. Pull
the plug of the hood or sw�tch off the ma�n
fuse Otherw�se, the r�sk of an electr�c shock
can st�ll occur.
F�gure 6: Replace halogen lamp