SilverStone DR01 User manual

Warning
Pleasedonotputhandsnearthesupportingbars,as
theychangeduringadjustingandmayhurtyou.
Pleasemakesureallinstalledequipments
areonthetable,andnotstickingoutof
theedge,oritmayharmorcausedamage.
Attention
Pleaseleaveenoughlengthofcablefor
heightadjustmentfunction,otherwiseit
maycauseunexpectedlost.
Attention
Please first adjust it to the highest,
then remove equipment to avoid
harm or damage.
Attention
Please move it by two persons, or
parts may collide and cause damage.
Attention
Warranty Information
This product has a limited 1 year warranty in North America andAustralia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.
本产品自购买之日起，于中国地区（不包含澳门，香港特别行政区）享有一年有限责任保固（部分产品为二年，三年或五年）。
详细保固年限请参照官方网站 https://silverstonetek.com.cn/ 公布之产品型号为依据。
1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.
2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.
3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.
4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
purchaser.
5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.
6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.
Please visit http://www.silverstonetek.com for the latest updates.
Warranty terms & conditions
Additional info & contacts
For North America ([email protected])
SilverStone Technology in NorthAmerica may repair or replace defective product with refurbished product that is not new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent
back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure withSilverStone Technology
in USA by first downloading the “USARMA form for end-users” form from the below link and follow its instructions.
http://silverstonetek.com/contactus.php
For Australia only ([email protected])
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above “Warranty terms & conditions” for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
(standard international call charges apply)
For Europe ([email protected])
For China ([email protected])
For all other regions ([email protected])
G11236530
Please refer to SilverStone website for latest specifications updates.
升降桌台
螺丝
配件包
包材
本表格依据 SJ/T 11364 的规定编制。
○ : 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
— : 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。
且該限用物質為排除項目
DR01
x4
x1
x1 x1
x1
A B C
DE
880MM
700MM
375MM
120-505MM
880MM
415MM
308MM
3-15KG
Max
Max:
2KG
Technical Data Table cover size:
120-505mm
3~15Kg
Loading range
Height adjustment range
Please do not exceed the
maximum WARNING bearing weight
WARNING
>950mm
>610mm
Accessory Package List
No. Sparepart No. Sparepart
No. Sparepart
No. Sparepart
No. Sparepart
34.6" wide platform Height Adjustable Stand up Desk Computer Riser with
Removable Keyboard Tray

+
ab
c
ASSEMBLYSTEP1
Attention
Please place the product properly
according to size of it, or it may
harm or cause damage.
Please take the packaging carton apart,
take out the product and place it one the table
Push the keyboard tray connector
into the slot and lock it
ASSEMBLYSTEP2
When removing the keyboard tray,
please open the wrench and remove it.
Warning
Please do not put hands near the supporting
bars, as they change during adjusting and
may hurt you.
Based on the actual usage, press the
handle on one side, and adjust the
workstation to the proper height
ASSEMBLYSTEP3
Please put the devices onto the
top of the workstation. Please make sure all installed equipments
are on the table, and not sticking out of the
edge, or it may harm or cause damage.
Careful
ASSEMBLYSTEP4
This screw is used to attach monitor mount
to sit-stand desk
1
Cable
ASSEMBLYSTEP5
Adhesive buckle helps to make the
cables tidy and clean. Please leave
enough length of cable for height
adjustment function, otherwise it
may cause unexpected lost.
Careful
Use the cable management
to guide and bundle the cables
2
Nylon ties
InstallMonitorARM