SilverStone RA02 User manual

Durable all aluminum handle grip and steel mounting plate
Pre-drilled Mounting holes ready for quick installation
High quality textured treatment finish
Ergonomically designed handle
RA02
Rackmount ear kit for rackmountable
SilverStone cases
Rackmount ear kit for rackmountable
SilverStone cases

1.The RA02 is intended to be used in conjunction with SilverStone desktop product with rackmount mounting holes designed for the
RA02. This product may not work with other cases.
2.Support: please refer to our website for the full list of supported cases.
3.The main function of the RA02 is to aid in securing your SilverStone desktop products to a rack storage, please DO NOT make RA02
as the sole supporting structure for the whole case, you should still use a rackmount tray or sliding rail to help with weight support
M4 screw x 4, one left support handle
and one right support handle
Vier M4-Schrauben,
ein linker Stützgriff und
ein rechter Stützgriff
Tornillo M4 x 4, un asa
izquierda y un asa
derecha
4 viti M4, una impugnatura
di supporto sinistra ed una
impugnatura di supporto
destra
M4 나사 x 4, 왼쪽
지지 손잡이 1개 및
오른쪽 지지 손잡이
1개
4 винта M4, для левой
опорной ручки идля
правой опорной ручки
Vis M4 x 4, une poignée de
support à gauche et une
poignée de support à droite
M4ネジx 4、
左サポートハンドル1個、
右サポートハンドル1個
M4四顆螺絲與左右兩邊
的把手各一個
M4四颗螺丝与左右两边
的把手各一个
Installation instruction
01

나사를 사용하여
손잡이를 데스크톱에
고정시키십시오.
Fissare le impugnature
al desktop
將把手鎖上機殼
将把手锁上机壳
各ハンドルをデスクトップ
ケースにネジで固定します。
Griffe an den Desktop
schrauben
Atornille las asa al
producto de sobremesa
Привинтит ручки ккорпусу
Vissez les poignées sur le
bureau
Screw the handles onto the desktop
02