SilverStone SST-MS08B User manual

MS08
Dual 2.5” SATA hot-swap mobile rack with RAID
and tray-less design
Premium aluminum construction for durability and protection
Support for two 9.5mm 2.5” drives
Support RAID 0, 1, JBOD
Offer great performance of up to SATA 6Gb/s
Tool-less tray design for quick hot-swaps
Fits into any 3.5” drive bay

The following manual and guides were carefully prepared by the SilverStone engineering team to
help you maximize the potential of your SilverStone product. Please keep this manual for future
reference when upgrading or performing maintenance on your system.Acopy of this manual can also
be downloaded from our website at:
Warranty Information
Installation and system optimization guide:
Product Overview
Preface
Specification
Applications
Package Content
Installation Chart
RAID
Usage as a 3.5” SATAHDD
Attention
P.1
P.1
P.1
P.3
P.4
P.6
P.12
P.16
P.18

Product Overview
Specification
Mobile Series
Model No.
Enclosure material
Color
Power requirement
HDD size support
HDD interface support
Minimum System
Requirements
Enclosure interface
RAID mode support
Net Weight
Dimension
SST-MS08B
Aluminum + Plastic
Black
5V via SATA15pin power connector
2.5” SATAHDD / SSD
SATAI / II / III
Windows XP, Vista, 7, 8, 8.1 (32bit/64bit)
Mac OS 10.x
Linux
SATA6Gb/s
RAID 0, RAID 1, JBOD
194g ±20g
146mm (D) x 102mm (W) x 25.4mm (H)
MS08
Introduction
Preface
1
The SilverStone MS08 is a mobile rack designed to convert a standard 3.5” drive bay
into two hot-swappable 2.5” drive bays. It has full SATA 6Gb/s speed and RAID 0,
RAID 1, JBOD support to offer complete and flexible solution for users looking quickly
add 2.5” drives to their system.
When using this product for the first time, setting it to operate at any of the RAID
mode or perform "Initialize", "Partition", or "Format" actions on the hard drive will
result in original data on the hard drive to be lost.
This product is factory set to “RAID 1". If only one drive is installed, the original data
on the drive will not be affected. However, installing two drives will result in loss of
original data after initial setup. To change RAID mode, the rack will need to be
powered for changes to take effect.
ion
o
ne MS08 is a mobile rack desi
g
ned to convert a standard
3
s
wappable 2.5” drive ba
y
s. It has full SATA 6Gb/s speed
D support to offer complete and flexible solution for users loo

Product Overview
Rear Panel
Mobile Series MS08
Front Panel
2
Drive access indicator Drive front panel Door lock switch
15 Pin SATA power 7 Pin SATA data RAID mode Confirm button
connector connector Switch for RAID mode change
Confirm button: After selecting RAID mode, please press “Confirm button” for 5
seconds.
Note: Mode setting change will only take effect when powered so please perform this
action with the 15pin SATA power connector connected before installing it into the
computer chassis!

Applications
Mobile Series MS08
3
1.어떤 3.5” 하드 드라이브 베이와도 함께 사용 가능
2.대부분의 3.5” SATA 내장/외장 인클로저와 함께 사용 가능
1.兼容任何標準的3.5吋大小之裝置槽位
2.兼容大多數機殼的內部/外部3.5吋SATA槽位
1.兼容任何标准的3.5吋大小之装置槽位
2.兼容大多数机壳的内部/外部3.5吋SATA槽位
1.任意の3.5”ハードディスクドライブベイと互換
2.殆どの3.5”SATA内部/外部エンクロージャーと互換
1.Compatible with any 3.5” hard drive bay
2.Compatible with most 3.5”SATA internal/external enclosure
1.Совместимость слюбым отсеком для 3,5-дюймовых жестких дисков
2.Совместимость сбольшинством встраиваемых/внешних корпусов 3,5-дюймовых
дисков SATA
1.Kompatibel mit allen 3,5-Zoll-Laufwerkschächten
2.Kompatibel mit den meisten internen/externen 3,5-Zoll-SATA-Gehäusen
1.Compatible avec toute baie de disque dur 3,5"
2.Compatible avec la plupart des boîtiers internes/externes SATA 3,5"
1.Compatible con cualquier bahía para discos duros de 3,5”
2.Compatible con la mayoría de carcasas internas/externas SATA de 3,5”
1.Compatibile con qualsiasi alloggio disco rigido da 3,5”
2.Compatibile con la maggior parte di box interni/esterni SATA da 3,5”
Applications

Mobile Series MS08
4
Package Content
Package Content
Item
Enclosure
User Manual
4PIN to SATA Power Cable
SATA Cable
Screw
Artikel
Gehäuse
Bedienungsanleitung
4-poliges SATA-Stromkabel
SATA-Kabel
Schraube
Quantity
1 pcs
1 pcs
1 pcs
1 pcs
4 pcs
Anzahl
1 Stk.
1 Stk.
1 Stk.
1 Stk.
4 Stk.
Élément
Boîtier
Manuel de l’utilisateur
Câble d'alimentation 4 broches vers SATA
Câble SATA
Vis
Quantité
1 unité
1 unité
1 unité
1 unité
4 unité
Ítem
Carcasa
Manual de usuario
Cable de potencia de 4 pines a SATA
Cable SATA
Tornillo
Cantidad
1 unidad
1 unidad
1 unidad
1 unidad
4 unidades
Elemento
Box
Manuale d’uso
Cavo d'alimentazione 4 pin a SATA
Cavo SATA
Vite
Quantità
1 pezzo
1 pezzo
1 pezzo
1 pezzi
4 pezzi

Package Content
Mobile Series MS08
5
Компонент
Корпус
Руководство пользователя
4-контактный переходник ккабелю питания SATA
Кабель SATA
Винт
Количество
1 шт.
1 шт.
1 шт.
1 шт.
4 шт.
Item
抽取盒
使用者手冊
4PIN 轉 SATA 電源線
SATA 傳輸線
螺絲
Quantity
1 pcs
1 pcs
1 pcs
1 pcs
4 pcs
Item
抽取盒
使用者手册
4PIN 转 SATA 电源线
SATA 传输线
螺丝
Quantity
1 pcs
1 pcs
1 pcs
1 pcs
4 pcs
品目
エンクロージャー
ユーザーマニュアル
4ピン-SATA電気ケーブル
SATAケーブル
ネジ
数量
1個
1冊
1本
1本
4本
품목
인클로저
사용 설명서
4핀과 SATA 간 연결 전원 케이블
SATA 전원 케이블
나사
수량
1개
1개
1개
1개
4개

Installation Chart
Mobile Series MS08
6
into 3.5” hard drive bay
01
PC 전원을 끄고 PC 전원
케이블을 뽑습니다.
關閉電腦電源，並拔掉
電腦電源線。
关闭计算机电源，并拔掉
计算机电源线。
PCの電源をオフにし、
PCの電源ケーブルを外し
ます。
Turn off PC power, and
unplug PC power cable.
Выключите питание
ПК иотключите
кабель питания.
Schalten Sie den PC
aus und ziehen Sie das
Netzkabel des PCs.
Éteignez le PC, et
débranchez le câble
d'alimentation du PC.
Apague la potencia del
PC y desconecte el
cable de potencia del
PC
Spegnere il PC e
scollegare il cavo
d’alimentazione del PC.
02
PC 케이스를 엽니다.
打開電腦機殼。
打开计算机机壳。
PCケースを開けます。
Open PC case. Откройте корпус ПК.
Öffnen Sie das
PC-Gehäuse.
Ouvrez le boîtier du PC.
Abra la carcasa del PC
Aprire il case del PC.

Installation Chart
Mobile Series MS08
7
03
필요할 경우 3.5”베이를
빼냅니다.
如果需要請移除3.5吋
檔板。
如果需要请移除3.5吋
檔板。
必要であれば3.5″ベイ
を外します。
Remove 3.5″bay over if
needed.
При необходимости,
извлеките отсек для
3,5-дюймового диска.
Entfernen Sie die
Abdeckung des
3,5-Zoll-Schachts, falls
erforderlich.
Retirez le couvercle de
la baie 3,5" si
nécessaire.
Retire la cobertura de
la bahía de 3,5” si es
necesario
Rimuovere l’alloggio da
3,5”, se necessario.
04
3.5” 드라이브 베이에
랙을 끼웁니다.
安裝至3.5吋槽位。
安装至3.5吋槽位。
ラックを3.5″ドライ
ブベイに入れます。
Insert rack into 3.5″
drive bay.
Установите
устройство вотсек
для 3,5-дюймового
диска.
Setzen Sie das Rack in
den 3,5-Zoll-
Laufwerkschacht ein.
Insérez le rack dans la
baie de lecteur 3,5".
Inserte el rack en la
bahía para dispositivo
de 3,5”
Inserire il rack nell’
alloggio da 3,5”.