Simpli Home acadian User manual

1/21
60 INCH TV MEDIA STAND

2/21
Questions, problems, assembly help, missing parts?
In order to assist you in a timely manner, please have the following information ready:
Model # _______________________ Part Number or Letter_______________________
Purchased at ___________________Date of Purchase ___________________________
If you wish to return the product, please contact the retailer where the
product was purchased.
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service

3/21
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
CAUTION: Injuries and damage can occur from furniture tip over if product is not
properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided
with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.

4/21
CARE and MAINTENANCE
Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative
humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls,
and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally
along different grain directions. As humidity changes, the components of wooden objects are
continually pushing and pulling against each other. This pressure often results in parts of furniture
no longer fitting together closely or becoming distorted or breaking from their own internal
stresses.
The response to relative humidity changes begins with determining the annual average RH for
your particular space. Then try to keep the RH in the space where your furniture is as close to that
average as possible, generally within about 10% up or down. De-humidify in the summer and
humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern heating
systems, which can drive down interior RH in the winter, almost invariably cause problems for
furniture. To counteract their effect, you can either modify the RH by keeping furniture containing
spaces cooler in the winter or most importantly, have a good working humidifier for your home. A
humidistat automatically works to balance the humidity in your home so it is constant. Dry indoor
air can suck enough moisture from its surroundings to do permanent damage to wood, causing it
to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how rapidly a
wood will lose moisture are pore size and surface hardness. A piece made from a dense and hard
wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished piece
while pieces with veneer finishes are not only stronger, but lose moisture more slowly than other
finishes.
To help protect your wood furniture, take these steps:
• Use a humidifier, preferably one with an automatic control system that can sense the humidity
level and adjust itself accordingly. Don't over-humidify; that can damage wood by causing it to
expand and contract.
• Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
• If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3 to 4
inches away from the wall, giving the heat and air space to circulate.
• Dust with soft dry cloth.
• Do not use liquid or aerosol products.
• To avoid marking, do not place rubber on surface (foot pads, etc.)
• For soil build-up, wipe with damp cloth & dry.
• Do not use abrasive cleaners.
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

ABL
5/21
TOP
QTY 1
BR
LEFT SIDE
QTY 1
RIGHT SIDE
QTY 1
CL
LEFT BIG DIVIDER
QTY 1
CR
RIGHT BIG DIVIDER
QTY 1
D
SMALL DIVIDER
QTY 1
E
BOTTOM SHELF
QTY 1
F
CENTRE SHELF
QTY 1
LARGE SHELF
QTY 1
G
SMALL SHELF
QTY 2
H
DOOR (L&R Same)
QTY 2
IJL
LEFT BACK PANEL
QTY 1
Fr
on
t
/
A
vant
F
ro
nt
/
Avan
t
F
ro
n
t
/
Av
a
n
t
F
ront /
Ava
n
t
Fro
nt / Ava
n
t
Fr
ont
/
Ava
nt
F
r
o
nt / Ava
nt
PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service

6/21
K
BOTTOM SUPPORT LEG
QTY 1
LEFT DRAWER FRONT
QTY 1
LL
RIGHT DRAWER FRONT
QTY 1
LR
LEFT DRAWER SIDE
QTY 2
ML
RIGHT DRAWER SIDE
QTY 2
MR
DRAWER BACK
QTY 2
N
DRAWER BOTTOM
QTY 2
O
JR
RIGHT BACK PANEL
QTY 1
J1 J2
TOP BACK PANEL
QTY 1
BOTTOM BACK PANEL
QTY 1
PRE-ASSEMBLY INFORMATION
PARTS DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service

1
ALLEN KEY SCREW
M6 X 30 mm
QTY 29
32
CAM LOCK PIN
CAM LOCK
QTY 23
WOOD DOWEL
8 X 30 mm
QTY 14
PHILLIPS MEDIUM
SCREW
M3 X 15 mm
QTY 8
PHILLIPS LONG SCREW
M4 X 30 mm
QTY 4
7/21
8
MAGNET and PLATE
QTY 2 SETS
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 30
ALLEN KEY
QTY 1
PHILLIPS SHORT
SCREW
M3 X 12 mm
QTY 12
10
911
6 75
SHELF SUPPORT
QTY 18
4
12
PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
FURNITURE TIP OVER
RESTRAINT
QTY 1 SET
HANDLE
M4 X 25 mm - QTY 2
M4 X 15 mm - QTY 2
QTY 4 SETS
a. M4 X 25 - QTY 2
( )1 is extra
b. M4 X 15 - QTY 1
c. M4 X 25 - QTY 1
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service

COMPONENTS – KEY DIAGRAM
8/21
BL
A
BR
CL
CR
J1
G
H
F
E
DK
I
I
H
LL
LR
N
O
MR
ML
JL
JR
J2
Front
/
Avant
Front
/
Avant
F
r
ont /
A
v
a
nt
F
r
on
t
/ A
v
ant
Fro
nt / Ava
n
t
F
r
on
t
/
A
v
a
nt
F
ront / A
v
a
nt

ASSEMBLY
STEP 1
STEP 2
1. Attach 4 Cam Lock Pins 2 to back of Left Drawer Front LL .
2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides ML , MR .
3. Insert 2 Cam Locks 2 into pre-drilled holes on each Drawer Side ML , MR .
4. Use flathead screwdriver secure Cam Locks.
1. Slide Drawer Bottom O firmly into slots on Drawer Sides ML , MR and
Left Drawer Front LL .
9/21
MR
ML
LL
2
MR
ML
O
LL

ASSEMBLY
STEP 3
10/21
1. Use Phillips Screwdriver to attach Handle 10 to Left Drawer Front LL .
Repeat Step 1-4 for the second drawer ( with Right Drawer Front LR ).
STEP 4
1. Align Drawer Back N with Drawer Bottom O and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each Side M .
3. Use Allen Key 4 to tighten screws. Do not over-tighten.
NOTE: The screwdriver is not
included in the hardware pack.
1
4ML
MR
O
LL
N
10
LL
LR
ML
MR
O
N
ML
MR
O
N

STEP 5
11/21
1. Attach 3 Cam Lock Pins 2 to each Big Divider CL , CR into guide holes.
2. Align and insert Cam Lock Pins on Big Dividers CL , CR into pre-drilled holes on
Centre Shelf F .
3. Place 6 Cam Locks 2 into pre-drilled holes on Centre Shelf F .
4. Use a flathead screwdriver to tighten Cam Locks into Pins.
STEP 6
1. Attach 3 Cam Lock Pins 2 to Centre Shelf F into guide holes.
2. Align and insert Cam Lock Pins on Centre Shelf F into pre-drilled holes on
Small Divider D .
3. Place 3 Cam Locks 2 into pre-drilled holes on Small Divider D .
4. Use a flathead screwdriver to tighten Cam Locks into Pins.
ASSEMBLY
CL
CR
F
2
2
CR
CL
F
D
F
ro
n
t
/
A
v
ant
Fro
n
t
/ Avan
t
F
ron
t / A
v
a
n
t
F
ron
t /
A
v
a
n
t
Fr
o
nt
/
A
v
a
nt
Fr
o
nt
/ Avan
t

STEP 7
1. Insert 2 Dowels 3 into pre-drilled holes on each Big Divider CL , CR and
Small Divider D .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be exposed.
3. Attach Big Dividers CL , CR and Small Divider D to Bottom Shelf E using 9
Allen Key Screws 1 through pre- drilled holes.
4. Use Allen Key 4 to tighten screws. Do not over-tighten.
ASSEMBLY
12/21
CL
CR
F
D
E
3
1
4
F
r
ont
/
A
v
a
n
t
F
r
o
nt
/
A
v
a
n
t
F
r
o
nt /
A
v
a
n
t
Front
/
Av
ant

STEP 8
13/21
1. Insert 2 Dowels 3 into pre-drilled holes on each Side BL , BR .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be exposed.
3. Attach 3 Cam Lock Pins 2 to each Side BL , BR into guide holes.
4. Align and insert Cam Lock Pins on Sides BL , BR into pre-drilled holes on
Bottom Shelf E .
5. Place 6 Cam Locks 2 into pre-drilled holes on Bottom Shelf E .
6. Use a flathead screwdriver to tighten Cam Locks into Pins.
ASSEMBLY
E
CL
CR
BL
BR
3
2
Fro
n
t
/
Avant
F
r
o
n
t
/
A
v
a
nt
Fro
n
t /
A
v
a
nt
Front
/
Avan
t
Fro
n
t
/ A
v
an
t

STEP 9
1. Insert 2 Dowels 3 into top corners of each Side BL , BR .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be exposed.
3. Align pre-drilled holes bottom corners of Top A with Dowels 3 on Sides BL , BR .
4. Attach Top A to Sides BL , BR and Big Dividers CL , CR using 12 Allen Key Screws 1 .
5. Use Allen Key 4 to tighten screws. Do not over-tighten.
14/21
ASSEMBLY
E
BL
BR
A
CL
CR
1
4
3
1
4
F
r
o
nt
/
A
v
a
nt
F
ro
n
t
/
A
vant
F
r
ont /
A
van
t
Fron
t
/
Avant
Fr
o
nt /
A
v
a
nt

STEP 10
1. Attach Bottom Support Leg K to Bottom Shelf E using 4 Phillips Screws 9 .
2. Use Phillips screwdriver to tighten screws. Do not over-tighten.
15/21
ASSEMBLY
A
E
BL
BR
CL
CR
K
K
E
9
F
r
ont /
A
van
t
Fr
o
nt
/ Av
a
n
t
F
ro
n
t
/
A
v
ant
Front
/
Avan
t
F
r
o
n
t
/
A
v
a
nt

STEP 11
1. Attach Back Panels JL , JR , J1 , J2 to Back of cabinet using Phillips Screws Round
Head 5 into pre-drilled guide holes.
2. Use Phillips screwdriver to tighten screws. Do not over-tighten.
16/21
ASSEMBLY
A
JR
J1
JL
J2
5
F
ron
t
/
A
va
n
t
Front
/
Avant

STEP 12
1. Attach hinges on Doors I to Sides BL , BR using Phillips Screws 7 into
pre-drilled guide holes.
2. Attach Magnet Plates 11 to bottom corner of Doors I using Phillips Screws 8 .
into guide holes on Doors I .
3. Attach Magnet 11 to Bottom Shelf E using Phillips Screws 8 into guide holes on
Bottom Shelf E .
4. Use Phillips screwdriver to attach Handles 10 to Doors I .
17/21
ASSEMBLY
A
F
BL
BR
E
CL
CR
I
I
10
8
11
7
11
8
Fr
ont /
Ava
nt
F
r
o
nt /
A
va
nt

STEP 13
1. Use 4 Shelf Supports 6 for each Shelf G & H in desired location.
2. 2 Shelf Supports 6 may be used on back top of each Shelf G & H as a tipping
restraint.
18/21
ASSEMBLY
A
A
BL
BR
F
CL
CR
E
I
I
H
G
H
6
6
GH &
Fr
on
t / Ava
nt
Fr
o
n
t /
A
v
an
t

STEP 14
19/21
NOTE: The screwdriver is not
included in the hardware pack.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over.
If the furniture tip over restraint kit is not in the box, please contact our customer
service department in order to obtain another kit before using the furniture.
FURNITURE TIP OVER RESTRAINT ASSEMBLY
12
12

20/21
1. Attach one of the mounting brackets securely to the back edge of
the furniture. Use the shorter screw.
2. Determine where furniture is to be placed and mark location on
the wall for mounting bracket screw hole approximately 2 inches
below the bracket mounted to the furniture.
3. Drill a 3/16 inch hole in the wall. Press the plastic anchor into the
hole and gently tap until the flange on the anchor is against the
wall surface.
4. Position the bracket over the anchor and use the longer screw to
securely attach the bracket to the wall.
5. Place the furniture so the back edge is in line with the bracket on
the wall.
6. Lace an end of the nylon zip-tie strap down through each bracket.
Bring both ends together and slide the smooth side upright
through the square-shaped end and pull through to create the
“locked” position.
7. Check to make sure the strap is securely laced and locked to the
brackets.
● DO NOT place heavy objects in top drawers
● DO NOT let children climb or hang on drawers, doors or shelves
Furniture Tip Over Restraint Instructions:
x
x
FURNITURE TIP OVER RESTRAINT ASSEMBLY