Simpli Home brooklyn + max WyndenHall AXCACA47-BL User manual

ACADIAN / NORMANDY / BRUNSWICK
ENTRYWAY STORAGE CABINET
1/22
MODEL # AXCACA47-BL
TM
TM
SI
M P HOME®
LIFE BY DESIG N

2/22
TM
TM
SI
M P HOME®
LIFE BY DESIG N
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am –4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following
information ready:
Model # _________________Part Number or Letter_____________________
Purchased at ____________Date of Purchase _________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

3/22
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
SAFETY INFORMATION

4/22
Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the components
of wooden objects are continually pushing and pulling against each other. This pressure
often results in parts of furniture no longer fitting together closely or becoming distorted
or breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in
the summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings
to do permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger, but lose moisture more
slowly than other finishes.
To help protect your wood furniture, take these steps:
·Use a humidifier, preferably one with an automatic control system that can sense the
humidity level and adjust itself accordingly. Don't over-humidify; that can damage wood
by causing it to expand and contract.
·Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
·If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3
to 4 inches away from the wall, giving the heat and air space to circulate.
·Dust with soft dry cloth.
·Do not use liquid or aerosol products.
·To avoid marking, do not place rubber on surface (foot pads, etc.)
·For soil build-up, wipe with damp cloth & dry.
·Do not use abrasive cleaners.
CARE and MAINTENANCE
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

PART DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
5/22
TOP
QTY 1
BOTTOM SHELF
QTY 1
CABINET SHELF
QTY 2
LEFT SIDE
QTY 1
LARGE DIVIDER
QTY 1
MIDDLE FRAME
QTY 1
SMALL DIVIDER
QTY 1
A BL
CD E
FG
RIGHT SIDE
QTY 1
BR
LEFT DOOR
QTY 1
HL
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
PRE-ASSEMBLY INFORMATION MODEL # AXCACA47-BL

PART DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
6/22
LEFT BACK PANEL
QTY 1
RIGHT DOOR
QTY 1
DRAWER FRONT
QTY 2 LEFT DRAWER SIDE
QTY 2
DRAWER BACK
QTY 2
DRAWER BOTTOM
QTY 2
HRIL
J KL
L M
RIGHT DRAWER SIDE
QTY 2
KR
RIGHT BACK PANEL
QTY 1
IRWarning Label
PRE-ASSEMBLY INFORMATION MODEL # AXCACA47-BL

ALLEN KEY
QTY 1
ALLEN KEY SCREW
M6 X 30mm
QTY 18
PHILLIPS SCREW
ROUND HEAD
M4 X 15mm
QTY 18
HANDLE
M4 X 15 mm -2PC
M4 X 25 mm - 2PC
QTY 4 SET
MAGNET AND PLATE
QTY 2 SET
SHELF SUPPORT
QTY 12
PHILLIPS SCREW
M3 X 15mm
QTY 8
CAM LOCK PIN
CAM LOCK
QTY 14 SETS
WOOD DOWEL
M8 X 30mm
QTY 10
PHILLIPS SCREW
M3 X 12mm
QTY 12
HARDWARE DESCRIPTION
12 3 4
5 6 7 8
9 10 11
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
7/22
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25mm - QTY 2
( 1 is extra )
b. M4 X 15mm - QTY 1
c. M4 X 25mm - QTY 1
PRE-ASSEMBLY INFORMATION MODEL # AXCACA47-BL

8/22
BL
A
IRDF
GG
C
E
IL
BR
HL
HR
M
L
KLJ
KR
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
COMPONENTS-KEY DIAGRAM MODEL # AXCACA47-BL

KL
J
2
STEP-1
9/22
STEP-2
1. Slide Drawer Bottom M firmly into slots on Drawer Sides KL , KR and
Drawer Front J .
KR
KL
KR
M
J
J
KR
KL
1. Attach 4 Cam Lock Pins 2 to pre-drilled holes at back of Drawer Front J .
2. Align Cam Lock Pins with guide holes and attach Drawer Sides KL , KR .
3. Insert 2 Cam Locks 2 into guide holes on each Drawer Side KL , KR .
4. Use flathead screwdriver secure Cam Locks.
ASSEMBLY MODEL # AXCACA47-BL

L
1
4
NOTE: The screwdriver is not
included in the hardware pack.
STEP-3
STEP-4
1. Align Drawer Back L with Drawer Bottom M and press firmly into slot.
2. Attach Drawer Back L using 2 Allen Key Screws 1 through guide holes on
each Side KL , KR .
3. Use Allen Key 4 to tighten screws. Do not over-tighten.
1. Use Phillips screwdriver to attach Handle 7 to Drawer Front J .
7
J
M
Repeat Step 1 - 4 for the second drawer.
J
10/22
KL
KR
ASSEMBLY MODEL # AXCACA47-BL

1
4
3
C
E
STEP-5
11/22
1. Insert 2 Dowels 3 into guide holes on bottom of Large Divider C .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach Bottom Shelf E to Large Divider C using 2 Allen Key Screws 1 .
4. Use Allen Key 4 to tighten Screws. Do not over-tighten.
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCACA47-BL

C
E
F
4
1
STEP-6
12/22
1. Attach Middle Frame F to Large Divider C using 2 Allen Key Screws 1 .
2. Use Allen Key 4 to tighten Screws. Do not over-tighten.
Front / Avant
Front / Avant
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCACA47-BL

STEP-7
13/22
1. Attach 2 Cam Lock Pins 2 into pre-drilled holes at the top of Middle Frame F .
2. Align Cam Lock Pins with guide holes on Small Divider D .
3. Insert 2 Cam Locks 2 into guide holes on Small Divider D .
4. Use flathead screwdriver secure Cam Locks.
E
C
F
D
2
Front / Avant
Front / Avant
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCACA47-BL

C
E
F
D
STEP-8
14/22
2
3
3
1. Insert 4 Dowels 3 into guide holes on Middle Frame F
( 2 dowels on each side ).
2. Insert 4 Dowels 3 into guide holes on Bottom Shelf E
( 2 dowels on each side ).
3. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
4. Attach 2 Cam Lock Pins 2 into pre-drilled holes on each Side BL , BR .
5. Align Cam Lock Pins with guide holes on Bottom Shelf E .
6. Insert 4 Cam Locks 2 into guide holes on Bottom Shelf E
(2 Cam Locks on each Side).
7. Use flathead screwdriver secure Cam Locks.
BL
BR
Front Side
Front / Avant
Front / Avant
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCACA47-BL

STEP-9
15/22
1. Attach Top A to Sides BL , BR and Small Divider D using 6 Allen Key Screws 1
(2 screws on each Side and Small Divider).
2. Use Allen Key 4 to tighten Screws. Do not over-tighten.
BR
E
C
BL
A
14
1
4
D
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
ASSEMBLY MODEL # AXCACA47-BL

A
5
IL
STEP-10
16/22
IR
BR
Front /
Avant
Front /
Avant
Warning Label
1. Attach Back Panels IL , IR to back frame of cabinet using 18 Phillips Screws
Round Head 5 through guide holes.
2. Use Phillips Screwdriver to tighten screws.
ASSEMBLY MODEL # AXCACA47-BL
Note:
Thebackofthecabinetframedoesnothavepre-drilledholestoattachthebackpanels.

STEP-11
17/22
Front /
Avant
First Step
Last Step ( after adjust the door )
8
910
10
10
7
1.AttachhingesonDoorsHL,HRtoSidesBL,BRusingPhillipsScrews10intopre-drillholes:
-UsingPhillipsscrewdrivertoattachScrews10atmiddleholeofhingesfor
bothtop&bottomhinges.
-Adjustthedoortoensuretheyarealignedstraight&squarewithbottomshelf&side.
-UsingPhillipsscrewdrivertotightentherestofscrews10intopre-drillholes
(top&bottomholesonhinges).
2.AttachMagnetPlates9tobottomcornerofDoorsHL,HRusingPhillipsScrews8into
pre-drilledholesonDoorsHL,HR.
3.AttachMagnets9usingPhillipsScrews8intopre-drilledholesonBottomShelfE.
4.UsePhillipsscrewdrivertoattachHandles7toDoorsHL,HRthroughguidehole.
A
BL
C
Front /
Avant
BR
Front /
Avant
HR
HL
E
ASSEMBLY MODEL # AXCACA47-BL

STEP-12
18/22
G
shelf level 3
shelf level 2
shelf level 1
6
shelf support
anti - tipping
6
G
G
G
1. Use 4 Shelf Supports 6 for each Cabinet Shelf G in desired location.
2. 2 Shelf Supports 6 may be used on back top of each Cabinet Shelf G
as a tipping restraint.
ASSEMBLY MODEL # AXCACA47-BL

STEP-13
19/22
1. Turn the wood lock ( on the bottom frame ) to be perpendicular to
the frame for safety stop
( intended to keep the drawers from pulling all the way out ).
ASSEMBLY MODEL # AXCACA47-BL

11
11
STEP-14
20/22
NOTE: The screwdriver is not
included in the hardware pack.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over.
If the furniture tip over restraint kit is not in the box, please contact our customer
service department in order to obtain another kit before using the furniture.
FURNITURE TIP OVER RESTRAINT ASSEMBLY