Simpli Home SAWHORSE User manual

SAWHORSE / HAWKINS / SPOKANE
METAL / WOOD LADDER SHELF with STORAGE
MODEL # AXCSAWM06-WAL
1/24

For Fastest Customer Service
*If you’ve purchased from a retailer and you wish to return the product, please contact
the retailer directly.
VISIT US
Visit our site directly at
www.simpli-home.com
SPEAK WITH US
1-866-518-0120
MONDAY TO FRIDAY
9 AM TO 5 PM EST.
EMAIL US
[e-mail]
Other ways to contact us…
1. Open your phone’s camera.
2. Point your phone’s camera at the QR code to scan.
3. Click on the pop up.
4. You’ll be taken to our customer service page.
5. Fill the form with your order information and issue.
6. Submit form.
7. A customer service associate will contact you.
2/24

3/24
IMPORTANT: Please read this manual carefully before beginning assembly
of this product. Keep this manual for future reference.
CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact
our customer service department in order to obtain another kit before using
the furniture.
Identify all the parts and hardware. Do not discard of the packaging until
you have checked that you have all the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
SAFETY INFORMATION

CARE and MAINTENANCE
This furniture is designed for indoor use.
Damage to furniture can come from temperature changes in relative
humidity (RH) in our homes. Humid air oxidizes metal which results in
rusting, corrosion, tarnishing and roughness. Wood absorbs water as
relative humidity rises and falls, and in doing so it swells and shrinks.
To protect against the humidity effect, the metal is powder coated. The
powder coat layer protects the metal from oxidizing, corrosion, tarnishing
and scratching and keeps it looking good for years to come. The wood is
sealed and lacquered to protect against humidity.
To help protect your furniture, follow these steps:
•Use a humidifier, preferably one with an automatic control system
•that can sense the humidity level and adjust itself accordingly
•Dust with soft dry cloth
•Wipe up spills promptly
•Clean with a dry cloth
•Do not use abrasive cleaners, chemical solvents, strong detergents,
•cleaners with bleach, and furniture polish
•Use soft felt base coasters, placemats to help prevent scratches
•Keep furniture out of direct sunlight, which can cause cracking or
•roughness on the protective layer
•If it can be avoided, do not put furniture near heating vents
•Keep the furniture 3 to 4 inches away from the wall, giving heat and
air space to circulate
4/24

PRE-ASSEMBLY INFORMATION MODEL # AXCSAWM06-WAL
PART DESCRIPTION
A
AB C
SHELF
QTY 1
DRDL
TOP CABINET SHELF
QTY 1
E
RIGHT SIDE CABINET PANEL
QTY 1
BOTTOM CABINET SHELF
QTY 1
FR
G
FL
LEFT SIDE CABINET PANEL
QTY 1
RIGHT SIDE
QTY 1
LEFT SIDE
QTY 1
5/24
SHELF
QTY 1
SHELF
QTY 1

PRE-ASSEMBLY INFORMATION MODEL # AXCSAWM06-WAL
PART DESCRIPTION
A
HI
JLJR
LK
DRAWER BOTTOM
QTY 2
M
BACK PANEL
QTY 1
DRAWER FACE
QTY 2
LEFT DRAWER SIDE
QTY 2
RIGHT DRAWER SIDE
QTY 2
DRAWER BACK
QTY 2
DRAWER FRONT
QTY 2
6/24

PRE-ASSEMBLY INFORMATION MODEL # AXCSAWM06-WAL
HARDWARE DESCRIPTION
A
143
`
A
56 87
A
910
ALLEN KEY BOLT
M6 x 20 mm
QTY 22
CAM LOCK
M 6 X 40 mm
QTY 16 SETS
WASHER
Ø 20 / Ø 9 x 3mm
QTY 34
FURNITURE TIP OVER RESTRAINT
QTY 2 SETS
M4 X 20 mm
QTY 2
M4 X 30 mm
QTY 2
ALLEN KEY BOLT
M6 x 40 mm
QTY 12
WASHER
Ø10 / Ø5 x 1.5 mm
QTY 26
SCREW
M4 x 20 mm
QTY 26
Required -
Phillips screwdriver
Not Included
ALLEN KEY
4 mm
QTY 1
M4 X 40 mm
QTY 2
LOCK WASHER
Ø15 / Ø 9 x 2 mm
QTY 22
HANDLE
M4 x 50 mm
2SETS
A
2
7/24
A
8

COMPONENTS –KEY DIAGRAM MODEL # AXCSAWM06-WAL
8/24
G
H

ASSEMBLY
1. Insert Cam Locks 9 to Drawer Sides JRand JL .
2. Use Screwdriver to tighten the Cam Locks 9 .
MODEL # AXCSAWM06-WAL
STEP 1
9/24

ASSEMBLY MODEL # AXCSAWM06-WAL
STEP 2
1. Attach the Handle 8 to the Drawer Face I using the Handle screws 8 .
2. Use a Screwdriver to tighten screws.
10/24

ASSEMBLY MODEL # AXCSAWM06-WAL
1. Attach Drawer Sides JLand JRto Drawer Front L and Drawer Back K
with Cam Locks 9 .
2. Use Screwdriver to lock Cam Locks 9 in place.
STEP 3
11/24
J
JR
J
JLJ
K
J
L
J
9

ASSEMBLY MODEL # AXCSAWM06-WAL
1. Attach Drawer Sides JLand JR to Drawer Bottom L using Screws 6
and Washers 7 .
2. Use Screwdriver to tighten Screws 6 .
STEP 4
6
7
12/24

ASSEMBLY MODEL # AXCSAWM06-WAL
STEP 5
1. Attach Drawer Face I to Drawer Front L using Allen Key Bolts 3 and
Washers 2 .
2. Use Allen Key 4 to tighten Bolts.
2
13/24

ASSEMBLY MODEL # AXCSAWM06-WAL
1. Attach Top Cabinet Shelf E to Cabinet Panels FLand FRusing
Allen Key Bolts 3 and Washers 2 . Do not over tighten Bolts.
2. Use Allen Key 4 to tighten Bolts 3 .
STEP 6
14/24

ASSEMBLY MODEL # AXCSAWM06-WAL
1. Attach Cabinet Panels FLand FRto Bottom Cabinet Shelf G using
Allen Key Bolts 3 and Washers 2 . Do not over tighten bolts.
2. Use Allen Key 4 to tighten Bolts.
STEP 7
15/24

ASSEMBLY MODEL # AXCSAWM06-WAL
1. Attach Cabinet Panels FLand FR, Bottom Cabinet Shelf G and
Top Cabinet Shelf E to Storage Back H using Screws 6 and Washers 7 .
2. Use Screwdriver to tighten Screws 6 .
STEP 8
16/24

ASSEMBLY MODEL # AXCSAWM06-WAL
1. Align Sides DLand DRwith Shelf A , B and C .
2. Align assembled Cabinet with Sides DLand DR .
3. Use Allen Key Bolts 1 , Lock Washers 5 and Washers 2 to secure parts
A , B , C , Cabinet and Legs DL, DR.
4. Use Allen Key 4 to tighten Bolts.
STEP 9
17/24
J
2J 5J 1J 4

ASSEMBLY MODEL # AXCSAWM06-WAL
STEP 10
1. Attach Sides DLand DRto Shelf A , B and C using Allen Key Bolts 1 ,
Washers 2 and Lock Washers 5 .
2. Use Allen Key 4 to tighten Bolts.
18/24

ASSEMBLY MODEL # AXCSAWM06-WAL
1. Insert the assembled drawers in the Cabinet.
STEP 11
19/24

ASSEMBLY MODEL # AXCSAWM06-WAL
1. Adjust the Drawer Face I using Allen Key 4 .
STEP 12
20/24
34
2