Simpli Home Wyndenhall Brooklyn + Max Warm Shaker... User manual

WARM SHAKER / NORFOLK / LEXINGTON
MEDIUM STORAGE & MEDIA CABINET
MODEL # AXWSH005-TB
1/18
SI
M
P
I
I
HOME
L I F E B Y D E S I G N

2/18
SI
M
P
I
I
HOME
L I F E B Y D E S I G N
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am – 4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following information ready:
Model # _______________________ Part Number or Letter_______________________
Purchased at ___________________Date of Purchase ___________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

3/18
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
CAUTION: Injuries and damage can occur from furniture tip over if product is not
properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided
with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.

4/18
CARE and MAINTENANCE
Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative
humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls,
and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally
along different grain directions. As humidity changes, the components of wooden objects are
continually pushing and pulling against each other. This pressure often results in parts of furniture
no longer fitting together closely or becoming distorted or breaking from their own internal
stresses.
The response to relative humidity changes begins with determining the annual average RH for
your particular space. Then try to keep the RH in the space where your furniture is as close to that
average as possible, generally within about 10% up or down. De-humidify in the summer and
humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern heating
systems, which can drive down interior RH in the winter, almost invariably cause problems for
furniture. To counteract their effect, you can either modify the RH by keeping furniture containing
spaces cooler in the winter or most importantly, have a good working humidifier for your home. A
humidistat automatically works to balance the humidity in your home so it is constant. Dry indoor
air can suck enough moisture from its surroundings to do permanent damage to wood, causing it
to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how rapidly a
wood will lose moisture are pore size and surface hardness. A piece made from a dense and hard
wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished piece
while pieces with veneer finishes are not only stronger, but lose moisture more slowly than other
finishes.
To help protect your wood furniture, take these steps:
• Use a humidifier, preferably one with an automatic control system that can sense the humidity
level and adjust itself accordingly. Don't over-humidify; that can damage wood by causing it to
expand and contract.
• Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
• If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3 to 4
inches away from the wall, giving the heat and air space to circulate.
• Dust with soft dry cloth.
• Do not use liquid or aerosol products.
• To avoid marking, do not place rubber on surface (foot pads, etc.)
• For soil build-up, wipe with damp cloth & dry.
• Do not use abrasive cleaners.
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
MODEL # AXWSH005-TB
PARTS DESCRIPTION
5/18
A
PARTS DESCRIPTION
TOP
QTY 1
LEFT SIDE
QTY 1
BL
RIGHT SIDE
QTY 1
BR
CENTRE SUPPORT
QTY 1
C
LEFT DOOR
QTY 1
DL
RIGHT DOOR
QTY 1
DR
BOTTOM SHELF
QTY 1
TOP SHELF
QTY 1
EFG
DIVIDER
QTY 1
HIL
LEFT BACK PANEL
QTY 1
CABINET SHELF
QTY 2
IR
RIGHT BACK PANEL
QTY 1
Fr
ont / A
v
ant
Front / Av
ant
Front / Av
ant
Front / A
v
ant
Fr
ont / A
vant
Front / Av
ant

PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
6/18
123
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
456
789
10 11 12
23
ALLEN KEY
QTY 1
CAM LOCK PIN
CAM LOCK
QTY 12 SETS
ALLEN KEY SCREW
M6 X 30 mm
QTY 8
PHILLIPS SCREW
M4 X 15 mm
QTY 24
PHILLIPS SCREW
M3 X 15 mm
QTY 8
MAGNET AND PLATE
QTY 2 SETS
SHELF SUPPORT
QTY 12
HANDLE
M4 X 25 mm
QTY 2 SETS
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 21
WOOD DOWEL
Ø8 X 30 mm
QTY 10
ADJUSTABLE HINGE
QTY 4 SETS
MODEL # AXWSH005-TB
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25 - QTY 2
( )1 is extra
b. M4 X 15 - QTY 1
c. M4 X 25 - QTY 1

COMPONENTS – KEY DIAGRAM
7/18
A
G
ILIR
CBR
F
H
E
BL
H
DR
DL
MODEL # AXWSH005-TB
Front
/
Avant
Front
/
Avant
Front /
Avant
Front / Avant
Front
/ Avant
Front / Avant

ASSEMBLY
STEP 1
8/18
1. Attach Bottom Shelf E to Centre Support C with Allen Key Screws 1 through
pre-drilled holes.
2. Attach Cam Lock Pins 2 to Top Shelf F using guide holes.
3. Align Cam Lock Pins 2 and insert into pre-drilled holes on Centre Support C .
4. Insert 2 Cam Locks 2 into pre-derilled holes in Centre Support C .
5. Once in place tighten Cam Locks 2 using a flathead screwdriver.
F
C
E
1
3
2
MODEL # AXWSH005-TB
Fr
ont
/ A
v
ant
Fr
ont
/ A
v
ant
Fr
ont
/
Avant

ASSEMBLY
STEP 2
1. Attach Cam Lock Pins 2 into guide holes on Left Side BL
( 3 Cam Lock Pins for the bottom and 2 for the top ).
2. Align Cam Lock Pins 2 with pre-drilled holes of Bottom Shelf E and Top Shelf F .
3. Insert Cam Locks 2 into pre-drilled holes of Bottom Shelf E and Top Shelf F .
4. Once in place tighten Cam Locks 2 using a flathead screwdriver.
F
E
C
BL
2
2
2
2
2
MODEL # AXWSH005-TB
9/18
Front /
A
v
ant
Front
/
Avant
Fr
ont
/ Av
ant
Front /
A
vant

ASSEMBLY
STEP 3
10/18
1. To attach Right Side BR to Bottom Shelf E and Top Shelf F
repeat steps 1 - 4 in step 2.
BL
BR
C
E
F
2
2
MODEL # AXWSH005-TB
Fr
ont / A
v
ant
Front / Av
ant
Fr
ont
/ Av
ant
Fr
ont / A
v
ant
Fr
ont / A
v
ant

ASSEMBLY
11/18
STEP 4
1. Insert 2 Wood dowels 11 into corner of each Side BL , BR .
2. Insert 6 Wood dowels 11 into Divider G .
3. Use rubber mallet to tap Dowels 11 into bottom of holes securely. ½ length of
Dowels should be exposed.
4. Align Dowels 11 with pre-drilled holes in centre of Top Shelf F and insert firmly.
5. Align pre-drilled holes on bottom of Top A with Dowels on Sides BL , BR and
Top Centre G .
6. Firmly insert Dowels 11 into part A .
7. Attach Top A to Sides BL , BR through pre-drilled holes using Allen Key Screws 1 .
8. Use Allen Key 3 to tighten screws.
A
BL
BR
F
G
11
1
3
11
MODEL # AXWSH005-TB
Fr
ont /
Av
ant
Fr
ont
/ A
vant
Front /
A
vant
Front /
Avant
Front
/
A
v
ant
Front /
A
vant

ASSEMBLY
STEP 5
12/18
12
4
BL
DL
DR
BR
12
4
1. Attach Adjustable Hinges 12 to Doors DL , DR using Phillips Screws 4 into guide holes
on Doors DL , DR .
2. Attach Adjustable Hinges on Doors DL , DR to Sides BL , BR using Phillips Screws 4
into guide holes on Sides BL , BR .
3. Use a Phillips screwdriver to tighten screws.
MODEL # AXWSH005-TB
DLDR &
Fr
ont
/
A
vant
Front / Avant
Front
/ Av
ant
Fr
ont
/ A
vant

ASSEMBLY
IMPORTANT NOTE:
13/18
II
I
Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so
that all the spaces between the door and the unit sides are equal. To adjust, follow
instructions:
1. Side adjustment 4 mm
To move the door towards the side panel, loosen screw I and tighten screw II .
To move the door away from the side panel, loosen screw II and tighten screw I .
2. Depth adjustment 4 mm
Loosen screw II ( just one turn ), adjust door to desired position, re-tighten screw .
3. Height adjustment
Loosen screw 4 , adjust door to desired position, re-tighten screw .
4
MODEL # AXWSH005-TB

ASSEMBLY
STEP 6
14/18
A
BL
BR
C
E
DR
DL
5
6
5
6
8
1. Attach Magnet Plates 6 to inside corners of Doors DL , DR using Phillips Screws 5
into guide holes on Doors DL , DR .
2. Attach Magnets 6 to inside corner of Bottom Shelf E using Phillips Screws 5
into guide holes on Bottom Shelf E .
3. Use a Phillips screwdriver to attach Handles 8 to Doors DL , DR .
MODEL # AXWSH005-TB

ASSEMBLY
STEP 7
15/18
1. Use 4 Shelf Supports 7 for each Cabinet Shelf H in desired location.
2. 2 Shelf Supports 7 may be used on back top of each Cabinet Shelf H as
a tipping restraint.
1. Attach Back Panels IL , IR to back of cabinet using Phillips Screws Round Head 9
into pre-drilled guide holes.
2. Use Phillips screwdriver to tighten screws.
STEP 8
9
IR
IL
7
H
MODEL # AXWSH005-TB

16/18
STEP 9
10
10
NOTE: The screwdriver is not
included in the hardware pack.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over.
If the furniture tip over restraint kit is not in the box, please contact our customer
service department in order to obtain another kit before using the furniture.
FURNITURE TIP OVER RESTRAINT ASSEMBLY

17/18
1. Attach one of the mounting brackets securely to the back edge of
the furniture. Use the shorter screw.
2. Determine where furniture is to be placed and mark location on
the wall for mounting bracket screw hole approximately 2 inches
below the bracket mounted to the furniture.
3. Drill a 3/16 inch hole in the wall. Press the plastic anchor into the
hole and gently tap until the flange on the anchor is against the
wall surface.
4. Position the bracket over the anchor and use the longer screw to
securely attach the bracket to the wall.
5. Place the furniture so the back edge is in line with the bracket on
the wall.
6. Lace an end of the nylon zip-tie strap down through each bracket.
Bring both ends together and slide the smooth side upright
through the square-shaped end and pull through to create the
“locked” position.
7. Check to make sure the strap is securely laced and locked to the
brackets.
● DO NOT place heavy objects in top drawers
● DO NOT let children climb or hang on drawers, doors or shelves
Furniture Tip Over Restraint Instructions:
x
x
FURNITURE TIP OVER RESTRAINT ASSEMBLY

WARRANTY
18/18
Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max
product. These products have been made to demanding, high-quality
standards and are guaranteed for domestic use against manufacturing
faults for a period of 12 months from the date of purchase. This warranty
does not affect your statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.)
please contact us at our toll free service line at 1-866-518-0120 ext. 262
from 9 am to 4 pm, Monday to Friday, Eastern Standard Time or by email at
cust[email protected].
We reserve the right to repair or replace the defective product, at its
discretion.
This product is guaranteed for 12 months if used for normal purposes.
Any warranty is invalid if the product has been overloaded or subject to
neglect, improper use or an attempted repair by other than an authorized
agent. Heavy-duty or daily professional/commercial usage are not
guaranteed.
Due to continuous product improvement, we reserve the right to change
the product specifications without prior notice.
SI
M
P
I
I
HOME
L I F E B Y D E S I G N