Simpli Home WyndenHall brooklyn + max 3AXCDRP-10 User manual

TM
TM

TM
TM

PART DESCRIPTION
SHELF
QTY 1
5/20
PRE-ASSEMBLY INFORMATION MODEL # 3AXCDRP-10
FGL
H1
GRH2

PART DESCRIPTION
DRAWER BACK
QTY 2
DRAWER BOTTOM
QTY 2
LEFT BACK PANEL
QTY 1
6/20
RIGHT BACK PANEL
QTY 1
MIDDLE BACK PANEL
QTY 1

HARDWARE DESCRIPTION
7/20
Required -
Flathead screwdriver
Phillips screwdriver
Not Included
2
5
8
FURNITURE TIP OVER RESTRAINT
QTY 1 SET

III
F
F
E
JJJ
JJJ
B
P
K
K
C
K
K
N
O
L
H1
H2
H2
H1

1. Attach 4 Cam Lock Pins 9 to pre-drilled holes at back of Drawer Front L .
2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides .
3. Insert 2 Cam Locks 9 into pre-drilled holes on each Drawer Side .
4. Use flathead screwdriver secure Cam Locks.
9
L
O
L

1. Align Drawer Back N with Drawer Bottom O and press firmly into slot.
2. Attach Drawer Back N using 2 Allen Key Screws 1 through pre-drilled holes on
each Side .
3. Use Allen Key 3 to tighten screws. Do not over-tighten.
Repeat Step 1-3 for the second drawer.
1
3
N
O
L

STEP-4
E
F
JJJ
F
E

1. Align Dowels on Divider of Wine Rack I with pre-drilled holes on Shelf F .
2. Attach Divider of Wine Rack I to Shelf F .
II
F
B
1
3

ASSEMBLY MODEL # 3AXCDRP-10
B

1. Attach Bottom Shelf C to 2 Sides AL , AR and 2 Dividers DL , DR using 12 Allen
Key Screws 1 (3 Screws on each Side and Divider ).
2. Use Allen Key 3 to tighten screws. Do not over-tighten.
1
3 3
1
C

1. Attach Back Panels P , PL , PR to back frame of sideboard by
using 26 Phillips Screws 5 .
2. Use Phillips screwdriver to snugly tighten screw.
1. Attach Legs H1 , H2 to Bottom Shelf C using 8 sets Allen Key Bolts, Lock Washers
and Washers 2 (2 sets on each Leg).
2. Use Allen Key 3 to tighten Bolts. Do not over-tighten.
C
2
3
B
P
5
H1
H2
H1
H2
PR
PL

NOTE: The screwdriver is not
included in the hardware pack.
6
8
7

4
D
K
K
K
K
K

10
10

TM
TM
WARRANTY