Simpli Home Banting AXCBAN-08 User manual

Banting / Devlin / Argyle
Mid Century 72 inch Wide TV Stand
Model # AXCBAN-08
TM
TM
1

2
It's time to register your product warranty.
It's quick and easy. And you'll be happy you did.
simpli-home.com/product-registration
Great quality is a right.
Thank you for shopping with Simpli Home,
America's top brand for high-value furniture.
Activate your 1-year warranty
Automatic entry to win a $500 gift certificate
Earn instant rewards and save
ü
ü
ü

3
Review your product and collect rewards!
Thank you for your purchase! We hope you enjoy it. We’d love
your feedback. Please share a review and get instant rewards!
simpli-home.com/product-review
Share photos and get your cash back!
Send us images or share them on social and qualify for instant
rewards. You may even receive store credit on your entire purchase!
simpli-home.com/share-images

4
For Fastest Customer Service:
1. Open your phone’s camera.
2. Point your phone’s camera at the QR code to scan.
3. Click on the pop up.
4. You’ll be taken to our customer service page.
5. Fill the form with your order information and issue.
6. Submit form.
7. A customer service associate will contact you.
Other ways to contact us…
Visit Us
Visit our site directly at
www.simpli-home.com
Email Us
[email protected]
Call Us
1-866-518-0120
Monday to Friday
9am to 5pm EST
*If you’ve purchased from a retailer and you wish to return the product, please
contact the retailer directly.

CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our Assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during Assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of Assembly.
Safety Information
IMPORTANT : Please read this manual carefully before beginning assembly
of this product. Keep this manual for future reference.
5

This furniture is designed for indoor use.
Damage to furniture can come from temperature changes in relative humidity (RH)
in our homes. Humid air oxidizes metal which results in rusting, corrosion, tarnishing
and roughness. Wood absorbs water as relative humidity rises and falls, and in doing
so it swells and shrinks.
To protect against the humidity effect, the metal is powder coated. The powder coat
layer protects the metal from oxidizing, corrosion, tarnishing and scratching and
keeps it looking good for years to come. The wood is sealed and lacquered to
protect against humidity.
To help protect your furniture, follow these steps:
·Use a humidifier, preferably one with an automatic control system that can
sense the humidity level and adjust itself accordingly
·Dust with soft dry cloth
·Wipe up spills promptly
·Clean with a dry cloth
·Do not use abrasive cleaners, chemical solvents, strong detergents, cleaners
with bleach, and furniture polish
·Use soft felt base coasters, placemats to help prevent scratches
·Keep furniture out of direct sunlight, which can cause cracking or roughness
on the protective layer
·If it can be avoided, do not put furniture near heating vents
·Keep the furniture 3 to 4 inches away from the wall, giving heat and air space to
circulate.
Care & Maintenance
6

WARNING Do not place toys, food, etc. on the top shelves or upper drawers.
Serious injury or death may occur when children climb on furniture. A remote
control or items placed on the furniture may encourage a child to climb on the
furniture and as a result make it top-heavy and cause it to tip over on the child.
WARNING Do not place a TV that exceeds the weight limits or size guidelines
shown in the instructions specified for the furniture. Do not overload shelves
or place heavy items on top shelves or drawers.
Improper use of furniture to support TVs may result in serious injury or death.
WARNING Do not relocate audio and/or video equipment to furniture not
specifically designed to support audio and/or video equipment. Do not move
furniture without shelves or drawers unloaded. Furniture can collapse or tip
over onto a child and cause physical injury or death.
This TV Stand does not come with legible instructions pertaining to the risk of
fire and electric shock that is associated with the use of electrical components
such as operation, user-maintenance, loading, storage and as applicable
electrical issues including grounding or double-insulation.
Any use of this item other than that recommended by the manufacturer in this
manual may cause fire, burns, electric shock and/or serious injuries or death.
WARNING
The maximum diagonal CRT television screen size is 25 inch to 27 inch (63.50 cm to
68.58 cm). For use with televisions weighing 220 lbs or less. Using larger or heavier
televisions may cause instability or tip over which can lead to serious injury or even
death.
The recommended maximum width of the television intended for use is 80 inch
(203.2 cm).
MAXIMUM LOAD 220 LBS MAXIMUM LOAD 25 LBS
7

.A
TOP
QTY 1 LEFT SIDE
QTY 1 RIGHT SIDE QTY 1
TOP SHELF
QTY 1
.C
TOP DIVIDER
QTY 1
.D.EL
LEFT MIDDLE DIVIDER
QTY 1
MIDDLE SHELF
QTY 1
.ER .F
FLIP DOWN DOOR
QTY 1
.BL .BR
.G
RIGHT MIDDLE DIVIDER
QTY 1
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front / Avant
Part Description
8
Model # AXCBAN-08Pre-Assembly Information

.HL
LEFT DIVIDER
QTY 1 RIGHT DIVIDER
QTY 1 SHELF QTY 2
BOTTOM SHELF
QTY 1
.J
BOTTOM SUPPORT LEG
QTY 2
.K.L
DRAWER FRONT
QTY 1
RIGHT DRAWER SIDE
QTY 1
.ML .
MR
DRAWER BACK
QTY 1
.HR .I
.N
LEFT DRAWER SIDE
QTY 1
Front /
Avant
Front /
Avant
Front /
Avant
Part Description
9
Model # AXCBAN-08Pre-Assembly Information

DRAWER BOTTOM
QTY 1 LEFT LARGE DOOR
QTY 1
.I
.PL
.I
.O
.R2
.S
.PR
.I
.R1
TOP BACK PANEL
QTY 1
BOTTOM BACK PANEL
QTY 1
.O
RIGHT LARGE DOOR
QTY 1
.RL
.RR
LEFT BACK PANEL
QTY 1
RIGHT BACK PANEL
QTY 1
.O
.QR
.O
.QL
LEFT SMALL DOOR
QTY 1 RIGHT SMALL DOOR
QTY 1
.T.U
LEG (L&R Same)
QTY 2
LEG UPPER CONNECTOR
QTY 2 LEG LOWER CONNECTOR
QTY 1
Warning
Label
Up Side / Vertical
UpSide/Vertical
UpSide/Vertical
Up Side / Vertical
Part Description
10
Model # AXCBAN-08Pre-Assembly Information

MAGNET AND PLATE
QTY 6 SETS
PHILLIPS SCREW
M3 X 15mm
QTY 24
.1
WOOD DOWEL
Ø8 X 30mm
QTY 36 ALLEN KEY
QTY 1
CAM LOCK PIN
CAM LOCK
QTY 13 SETS
ALLEN KEY SCREW
M6 X 30mm
QTY 37
.2.3
.4.5.6
.7.8
ALLEN KEY BOLT
M6 x 30 mm
QTY 12
ALLEN KEY BOLT
M6 x 15 mm
QTY 10
LOCK WASHER
Ø10 / Ø6.5 x 1.5 mm
QTY 10
WASHER
Ø16 / Ø6.5 x 1.5 mm
QTY 16
PHILLIPS SCREW
ROUND HEAD
M4 X 15mm
QTY 37
.9
.11 .10 .12
SHELF SUPPORT
QTY 12
Hardware Description
11
Model # AXCBAN-08Pre-Assembly Information

FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25mm - QTY 2
( 1 is extra )
b. M4 X 15mm - QTY 1
c. M4 X 25mm - QTY 1
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
ADJUSTABLE HINGE
QTY 8 SETS
.13 .14
PHILLIPS SCREW
M3.5 X 15mm
QTY 48
.15
.16 .17
PHILLIPS SCREW
M3.5 X 12mm
QTY 12
HINGE
QTY 2
.18
PHILLIPS SCREW
M4 X 30mm
QTY 8
Hardware Description
12
Model # AXCBAN-08Pre-Assembly Information

A
BL
C
D
EL
ER
F
G
HL
HR
I
I
J
KK
L
MR
ML
N
O
PL
PR
QL
QR
RR
RL
R1
R2
S
S
U
T
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
UpSide/Vertical
UpSide/Vertical
UpSide/Vertical
Front /
Avant
BR
Up Side / Vertical
13
Model # AXCBAN-08Components - Key Diagram

Step 1
P
X
1. Attach four Cam Lock Pins 3 into pre-drilled holes on back of Drawer Front L .
2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
Step 2
1. Align Cam Lock Pins with guide holes and attach Drawer Sides ML ,MR to Drawer Front L .
2. Insert two Cam Locks 3 into guide holes on each Drawer Side ML , MR .
3. Use Phillips screwdriver to secure Cam Locks. Do not over-tighten.
L
3
3
3
3
3
3
L
MR
ML L
L
MR
MR
ML
ML
14
Model # AXCBAN-08Assembly

Step 3
1. Slide Drawer Bottom O firmly into slots on Drawer Sides ML , MR and Drawer Front L .
Step 4
1. Align Drawer Back N with Drawer Bottom O and press firmly into slot .
2. Attach Drawer Back using two Allen Key Screws 4 through drilled holes on
each Drawer Side ML , MR .
3. Use Allen Key 2 to tighten Screws. Do not over-tighten
4
2
LL
LL
O
O
O
O
ML ML
ML ML
MR MR
MR
MR
N
N
15
Model # AXCBAN-08Assembly

Step 5
1
F
16
15
1
1
1. Insert four Dowels 1 into guide holes on Middle Shelf F .
2. Use rubber mallet to tap Dowels 1 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach Hinge 15 to Middle Shelf F by using Phillips Screws 16 to attach Middle
Shelf F through guide holes.
4. Use Phillips Screwdriver to tighten screws. Do not over-tighten.
Step 6
P
X
3
1
Front /
Avant
1
1
3
1. Insert four Dowels 1 into guide holes on Sides EL , ER.
2. Use rubber mallet to tap Dowels 1 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach three Cam Lock Pins 3 into pre-drilled holes on Sides EL , ER .
4. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
Front /
Avant
1
3
EREL
16
Model # AXCBAN-08Assembly

Step 7
Front /
Avant
Front / Avant
Front / Avant
Front / Avant
EL
ER
F
2. Insert six Cam Locks 3 into guide holes on Middle Shelf F .
3. Use Phillips screwdriver to secure Cam Locks. Do not over-tighten.
1. Align Cam Lock Pins and Wood Dowels with guide holes and attach
Middle Shelf F to Dividers EL , ER .
3
Front /
Avant
Front /
Avant
F
F
EL
EL
ER
ER
17
Model # AXCBAN-08Assembly

Step 8
1
C
Front /
Avant
1
1
1. Insert four Dowels 1 into guide holes on Top Shelf C , Top Divider D .
2. Use rubber mallet to tap Dowels 1 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
D
1
1
Step 9
C
C
D
D
Front / Avant Front / Avant
1. Align Wood Dowels with guide holes on
Top Shelf C attach Top Divider D to Top Shelf C .
4
4
2
2. Use three Allen Key Screws 4 to attach Top Divider D
through guide holes from Top Shelf C to pre-drilled holes of Top Divider D .
3. Use Allen Key 2 to tighten Screws and Bolts. Do not over-tighten.
18
Model # AXCBAN-08Assembly

Step 10
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
C
ER
EL
ER
EL
C
1. Align Wood Dowels with guide holes on
Top Shelf C attach Middle Dividers EL , ER to Top Shelf C .
Front / Avant
EL
ER C
4
2
Front / Avant
2. Use three Allen Key Screws 4 to attach each Middle Divider EL , ER through guide
holes from Middle Dividers EL , ER to pre-drilled holes of Top Shelf C .
3. Use Allen Key 2 to tighten Screws and Bolts. Do not over-tighten.
19
Model # AXCBAN-08Assembly

Step 11
Front / Avant
Front /
Avant
Front / Avant
Front / Avant
Front /
Avant
HR
HL
BR
BL
A
1
1
1
1
11
1
1. Insert four Dowels 1 into guide holes on each Sides BL , BR and Dividers HL , HR .
2. Use rubber mallet to tap Dowels 1 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
1. Attach three Cam Lock Pins 3 into pre-drilled holes on Top A .
2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
Step 12
P
X
3
3
20
Model # AXCBAN-08Assembly