Simpli Home WyndenHall brooklyn+max AXCBCDRP-07 User manual

DRAPER / BAXTER / TIERNEY
SPACE SAVER CABINET
MODEL # AXCBCDRP-07
/251
TM
TM
SI
M P
HOME®
LIFE BY DESIG
N

/252
TM
TM
SI
M P
HOME®
LIFE BY DESIG N
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am –4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following
information ready:
Model # _________________Part Number or Letter_____________________
Purchased at ____________Date of Purchase _________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

/253
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
SAFETY INFORMATION

/254
Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the components
of wooden objects are continually pushing and pulling against each other. This pressure
often results in parts of furniture no longer fitting together closely or becoming distorted
or breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in
the summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings
to do permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger, but lose moisture more
slowly than other finishes.
To help protect your wood furniture, take these steps:
·Use a humidifier, preferably one with an automatic control system that can sense the
humidity level and adjust itself accordingly. Don't over-humidify; that can damage wood
by causing it to expand and contract.
·Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
·If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3
to 4 inches away from the wall, giving the heat and air space to circulate.
·Dust with soft dry cloth.
·Do not use liquid or aerosol products.
·To avoid marking, do not place rubber on surface (foot pads, etc.)
·For soil build-up, wipe with damp cloth & dry.
·Do not use abrasive cleaners.
CARE and MAINTENANCE
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

PRE-ASSEMBLY INFORMATION MODEL # AXCBCDRP-07
/255
.A.BL .BR
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PART DESCRIPTION
TOP
QTY 1 TOP LEFT SIDE
QTY 1 TOP RIGHT SIDE QTY 1
.C.D.E
.F.GL .GR
BOTTOM SHELF
QTY 1 MIDDLE SHELF QTY 1 SHELF QTY 2
DIVIDER
QTY 1 LEFT DOOR QTY 1 RIGHT DOOR QTY 1
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant

PRE-ASSEMBLY INFORMATION MODEL # AXCBCDRP-07
/256
.HL .HR .I
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PART DESCRIPTION
.J.JL
BOTTOM BACK PANEL
QTY 1
BOTTOM BAR
QTY 1
LEFT BACK PANEL
QTY 1 RIGHT BACK PANEL QTY 1
.JR
BOTTOM LEFT SIDE
QTY 1 BOTTOM RIGHT SIDE QTY 1
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant

/257
PRE-ASSEMBLY INFORMATION MODEL # AXCBCDRP-07
.1
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
HARDWARE DESCRIPTION
.3 .2
CAM LOCK PIN
CAM LOCK
QTY 14 SETS
WOOD DOWEL
Ø8 X 30mm
QTY 1
MAGNET AND PLATE
QTY 2 SETS
PHILLIPS SCREW
M4 X 50mm
QTY 2
PHILLIPS SCREW
M4 X 15mm
QTY 24
PHILLIPS SCREW
ROUND HEAD
M4 X 15mm
QTY 8
SHELF SUPPORT
QTY 8
PHILLIPS SCREW
M3 X 15mm
QTY 8
.4.6 .5
.7.9 .8
ADJUSTABLE HINGE
QTY 4

/258
PRE-ASSEMBLY INFORMATION MODEL # AXCBCDRP-07
.10
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
HARDWARE DESCRIPTION
.12
.11
.13
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
ALLEN KEY SCREW
M6 X 50mm
QTY 2
a.M4X25mm-QTY2
(1isextra)
b.M4X15mm-QTY1
c.M4X25mm-QTY1
FURNITURE TIP OVER RESTRAINT
QTY 2 SETS
ALLEN KEY
QTY 1
ALLEN KEY BOLT: M6 X 35mm - QTY 6
LOCK WASHER: Ø10 / Ø6 X 1.5mm - QTY 6
WASHER: Ø16 / Ø6 X1mm - QTY 6
QTY 6 SETS

COMPONENTS-KEY DIAGRAM MODEL # AXCBCDRP-07
/259
A
BL BR
C
D
EE
FGL
GR
HL HR
I
J
JR JL
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant

/2510
STEP-1
ASSEMBLY MODEL # AXCBCDRP-07
1. Attach part HL to part C . Use three sets Allen Key Bolts, Lock Washers and
Washers 11 to secure part HL and C .
2. Attach part I to part HL . Use one Allen Key Screw 10 to secure part HL and I .
3. Use Allen Key 12 to tighten Allen Key Bolts and Screw. Do not over-tighten.
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
HL
I
C
12
10
11
12

/2511
STEP-2
ASSEMBLY MODEL # AXCBCDRP-07
Front /
Avant
Front /
Avant
Front /
Avant
1. Repeat Step-1 for the Bottom Right Side HR .
Front /
Avant
HL
HR
I
C
12
10
11
12

/2512
STEP-3
ASSEMBLY MODEL # AXCBCDRP-07
P
X
1
BL
BR
A
C
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
1
1
1
1
1
1
1
1. Attach Cam Lock Pins 1 into pre-drilled holes on each part A , BL , BR , C .
2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.

/2513
STEP-4
ASSEMBLY MODEL # AXCBCDRP-07
Front /
Avant
F
2
2
8
8
4
1.AttachMagnet4usingPhillipsScrews8intopre-drilledholesonpartF.
2. Use Phillips screwdriver to secure Screws. Do not over-tighten.
3. Insert one Dowel 2 into guide holes on part F .
4. Use rubber mallet to tap Dowel 2 into bottom of holes securely. 1/2 length of
Dowels should be exposed.

/2514
STEP-5
ASSEMBLY MODEL # AXCBCDRP-07
F
Front / Avant
D
6
6
1. Align Wood Dowel with guide hole on part D and attach part F to part D .
2.InserttwoPhillipsScrews6into guide holesonpartD.
3. Use Phillips screwdriver to secure Screws.

/2515
STEP-6
ASSEMBLY MODEL # AXCBCDRP-07
1. Align Cam Lock Pins with guide holes on part D and
attach part BL to part D .
F
BL
D
1
1
Front / Avant
Front / Avant
Front / Avant
Front / Avant
F
BL
D
2. Insert two Cam Locks 1 into guide holes on part D .
3. Use Phillips screwdriver to secure Cam Locks.

/2516
STEP-7
ASSEMBLY MODEL # AXCBCDRP-07
1. Repeat Step-6 for the Right Side BR .
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
D
F
BL
BR
D
F
BL
BR
11

/2517
STEP-8
ASSEMBLY MODEL # AXCBCDRP-07
Front /
Avant
Front / Avant
Front /
Avant
Front /
Avant
BL
BR
C
Front /
Avant
1. Align Cam Lock Pins with guide holes on top fame
and attach top frame to bottom frame.
2. Insert two Cam Locks 1 into guide holes on each part BL , BR .
3. Use Phillips screwdriver to secure Cam Locks.
C
BL
BR
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
1
1
1

/2518
STEP-9
ASSEMBLY MODEL # AXCBCDRP-07
Warning Label
Front /
Avant
Front /
Avant
BR
BL
C
J
JR
JL
1.SlideBackPanelsJ,JL,JRfirmlyintoslotsonSidesBL,BRandBottomShelfC.

/2519
STEP-10
ASSEMBLY MODEL # AXCBCDRP-07
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
BR
BL F
1. Align Cam Lock Pins with guide holes and
attach part A to parts BL , BR , F .
1
2. Insert Cam Locks 1 into guide holes on
each part BL , BR , F .
3. Use Phillips screwdriver to secure Cam Locks.
A
A
BR
BL F
Front /
Avant
Front /
Avant
Front /
Avant
1

/2520
STEP-11
ASSEMBLY MODEL # AXCBCDRP-07
Front /
Avant
Front /
Avant
JR
JL
J
9
1.UsePhillipsScrewsRoundHead9toattachBackPanelsJ,JL,JR
throughguideholes.
2.UsePhillipsscrewdrivertosecureScrews.Donotover-tighten.
STEP-12
E
E
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
5
1.UsefourShelfSupports5foreachCabinetShelfEindesiredlocation.