Birlea HOUSTON User manual

HOUSTON 2 DOOR 1 DRAWER WARDROBE
IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR HOUSTON 2 DOOR 1 DRAWER WARDROBE.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY:
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber inside the accessories pack.
HEALTH & SAFETY:
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Always use on a level, even surface.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push this product as this will cause damage.
Always lift this product with two people to repositions.
Keep any sharp objects away from this product.
ASSEMBLY INSTRUCTIONS
www.birlea.com Page of 9
Vendor: S000350
1

2
Page of 9
Vendor: S000350
Parts List Hardware List ( BOX 2 )
Part Descripion Part Description Qty
01
02
03
04
05
07
06
09
10
** You will need a small mallet and a
screwdriver for assembly.
** Some screws and wooden dowel
may remain.
** Note : To secure the item to the wall,
hardware L ( 2 pcs ) and
Q ( 2 pcs ) are not provided.
01 1
Top panel
02
03
04
05
06
07
08
09
10
Bottom panel
Middle panel
Door panel ( Left )
Metal bone
1
1
1
1
2
1
1
2
4
Side panel ( Left )
Side panel ( Right )
Back bone
Back panel
Metal frame
A2
Cam lock
Minifix screw
B
Plastic cap
M8 x 30mm Wood Dowel
C
D
E
F
G
H
I
J
L
M
N
O1
O2
M6 x 50mm CSK Cap Wood screw
M3.5 x 16mm C.B Screw
18
18
18
12
4
42
4
1
2
6
JCBC screw M6 x 30mm 6
JCBC screw M6 x 40mm 8
Stud 192 8
8
Stud 192 screw
433 Oval tube bracket 2
433 Oval paip 1
M4 x 38mm C.B Screw 8
8'' x 1'' PP tape 2
Wall plug -
A1
A3
K1
K2
Qty
11
Door panel ( Right ) 1
5/8 Hinges
4020 L BAR (100MM)
Allen key M4
M3 x 12mm C.B Screw
08
12
11
13
12
13
14
15
16
Drawer back
Drawer side
Drawer bottom
Drawer front
Drawer bone
1
1
1
1
2
P
Q
14'' Drawer slide (Left / Right)
14'' Drawer slide (Left / Right)
2
2
08
14
16
15
12
15 16
G
G
2
2
1
1
2
1
1
1
2
2
Box
1
2
2
2
2
2

3
Page of 9
Vendor: S000350
Step 1: Prepare these parts for assembly using hardware parts A1, A2, B, D, H, M and O1.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
01
A2
03 A2
B
A1
M
D
04
A1
B
05
08 X2
07
x4
x6
x2
x4
B
A1 x2
x4
A2 x6
x4
x4
A1 x4
x2
x4
06
D
Hx6
x12
O1
D
O1
O1
x2 Dx2
Dx2
14 A1 x2
03 04
A2
A2
10
11

4
Page of 9
Vendor: S000350
Step 3: Insert back panel (9) along the slot.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
05
08
08
03
Step 4: Attach middle panel (5) and back bone (8) to side panel (4) using hardware A1 and A2 with a screwdriver
(not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A1
A1
A3
A2
05
08
08
03
09
05
08
08
03
09
04
A1
A1
A2
A2
A1 A3
Step 2: Attach middle panel (5) and back bone (8) to side panel (3) using hardware A1 and A2 with a
screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A3 x 6
A3 x 6

5
Page of 9
Vendor: S000350
Step 5: Attach side panel (3) and (4) to top panel (1) using hardware A1 and A2 with a screwdriver
(not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
09
08
08
03
05
04 01
A1
A2
A1
A3
03
04
05 09
08
08
02
C
F
04
09
08
08
02
K1
K2
01
03
Step 6: Attach bottom panel (2) to side panel (3) and (4) using hardware C and F.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 7: Attach hardware K1 into top panel (1), bottom panel (2), side panel (3) and (4) using hardware K2
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A3 x 4
C x 4
F
K2 x 8
K1 x 8

6
Page of 9
Vendor: S000350
F
I
04
08
09
02
15
15
15
M
N03
04
05
02
01
Step 10: Attach hardware N into hardware M.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
F
I x 6
F
J x 8
Step 8: Attach metal frame (15) to metal bone (16) using hardware F and J.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 9: Attach metal frame (15) to bottom panel (2) using hardware F and I.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
09
F
J
15
15
16
15
16
08
16
16

Page of 9
Vendor: S000350
7
E
04
01
06
07
03
05
Step 12: Attach door panel (6) and (7) to side panel (3) and (4) using hardware D with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 11: Fix hardware G onto door panel (6) and drawer front (10) using hardware E
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
06
E x 4
D x 12
G x 2
02
HD
D
H
H
Vertical
Adjustment
Horizontal
Adjustment
Depth
Adjustment
10

Page of 9
Vendor: S000350
8
D
D
D
D
D
D
O2
O2
O2
O2
O2
O2
Step 13: Attach drawer bone (14) to drawer front (10) and drawer back (11) using hardware A1 and A2
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A1 A2
A1
A3
10
11
14
Drawer Front (10) and Drawer Back (11) using hardware L. Attach the hardware O2 to the
Drawer Sides (12) using hardware D.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A3 x 2
D x 6
L x 8
( L/R )
O2 x 2
12
11
14
10 12
11
14
10
12
11
14
10
13
13
12
L
L
x4
x4
14
10
13
Step 14: Attach the 1x Drawer Side (12) to the Drawer Front (10) and Drawer Back (11) using hardware L.
Then insert the Drawer Bottom (13) and attach the other 1x Drawer Side (12) to the
11
O2

O2
O1
O1
O2
Step 15: Assemble the drawer in place along the drawer slides.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Page of 9
Vendor: S000350
9
Additional Information:
· For complete product information, images and dimension diagrams please visit the website
www.birlea.com
· If you have any issues with your item please contact the retailer directly you purchased it from
who will be able to resolve any issues with Birlea.
· Why don't you send us photos of your assembled furniture to [email protected] to be shared in
our #birleahome feature on instagram.
L
P
Q
1.
P
D
2.
PLEASE NOTE that wall fixings are not supplied as different wall materials require different fixing
devices. You must use fixings devices suitable for the type of wall you intend to mount product to.
Ensure the head of any screw used has a diameter greater than the mounting hole and the fixing
is safe and secure before use.
Birlea Furniture advise you use the wall straps provided to further enhance the safety of this
product.
Step 16: To secure the item to the wall use hardware L, P and Q using a screwdriver (not provided).
Then attach hardware part P to top panel (1) using hardware D with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
D x 2
L x 2
P x 2
Q x 2
04
01
10
06
07