Simpli Home WyndenHall brooklyn+max AXCRACA17-BRU User manual

Acadian / Normandy / Brunswick
Tall TV Media Stand
Model # AXCRACA17-BRU
1

Great quality is a right.
Thank you for shopping with Simpli Home,
America's top brand for high-value furniture.
It's time to register your product warranty.
It's quick and easy. And you'll be happy you did.
üAcvate your 1-year warranty
üAutomac entry to win a $500 gi cerficate
üEarn instant rewards and save simpli-home.com/product-registraon
2

Thank you for your purchase! We hope you enjoy it. We’d love
your feedback. Please share a review and get instant rewards!
simpli-home.com/product-review
Review your product and collect rewards!
Send us images or share them on social and qualify for instant rewards.
You may even receive store credit on your enre purchase!
simpli-home.com/share-images
Share photos and get your cash back!
3

For Fastest Customer Service:
*If you’ve purchased from a retailer and you wish to return the product, please
contact the retailer directly.
Visit Us
Visit our site directly at
www.simpli-home.com
Call Us
1-866-518-0120
Monday to Friday
9am to 5pm EST
Email Us
customerser[email protected]
Other ways to contact us…
1. Open your phone’s camera.
2. Point your phone’s camera at the QR code to scan.
3. Click on the pop up.
4. You’ll be taken to our customer service page.
5. Fill the form with your order informaon and issue.
6. Submit form.
7. A customer service associate will contact you.
4

customer service department in order to obtain another kit before using the
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
CAUTION: Injuries and damage can occur from furniture tip over if product is not
properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided
with the product. Consult our assembly instructions for help.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
furniture.
May require 2 people for ease of assembly.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
IMPORTANT: Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
Safety Information
5

Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the components
of wooden objects are continually pushing and pulling against each other. This pressure
often results in parts of furniture no longer fitting together closely or becoming distorted
or breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in
the summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings
to do permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger but lose moisture more
slowly than other finishes.
This furniture is designed for indoor use.
To help protect your wood furniture, take these steps:
• Use a humidifier, preferably one with an automatic control system that can sense the
humidity level and adjust itself accordingly
• Don't over-humidify; that can damage wood by causing it to expand and contract
• Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp
• To avoid marking, do not place rubber on surface (foot pads, etc.)
• Do not use abrasive cleaners
• Dust with soft dry cloth
• For soil build-up, wipe with damp cloth & dry
• Do not use liquid or aerosol products
• If you can avoid it, don't put furniture near heating vents; if you can’t, keep the item 3 to
4 inches away from the wall, giving the heat and air space to circulate
Care & Maintenance
6

This TV Stand does not come with legible instructions pertaining to the risk of fire
and electric shock that is associated with the use of electrical components such as
operation, user-maintenance, loading, storage and as applicable electrical issues
including grounding or double-insulation.
WARNING Do not relocate audio and/or video equipment to furniture not
specifically designed to support audio and/or video equipment. Do not move
furniture without shelves or drawers unloaded. Furniture can collapse or tip over
onto a child and cause physical injury or death.
WARNING Do not place toys, food, etc. on the top shelves or upper drawers.
Serious injury or death may occur when children climb on furniture. A remote
control or items placed on the furniture may encourage a child to climb on the
furniture and as a result make it top-heavy and cause it to tip over on the child.
WARNING Do not place a TV that exceeds the weight limits or size guidelines
shown in the instructions specified for the furniture. Do not overload shelves or
place heavy items on top shelves or drawers.
Improper use of furniture to support TVs may result in serious injury or death.
Any use of this item other than that recommended by the manufacturer in this
manual may cause fire, burns, electric shock and/or serious injuries or death.
WARNING
The maximum diagonal CRT television screen size is 25 inch to 27 inch (63.50 cm to 68.58
cm). For use with televisions weighing 200 lbs or less. Using larger or heavier televisions may
cause instability or tip over which can lead to serious injury or even death.
The recommended maximum width of the television intended for use is 60 inch (152.4 cm).
MAXIMUM LOAD 25 LBS
MAXIMUM LOAD 200 LBS
7

Front
/
Avant
TOP
QTY 1
LEFT SIDE
QTY 1
RIGHT SIDE
QTY 1
V16-BR
BOTTOM SHELF
QTY 1
LEFT DIVIDER
QTY 1
RIGHT DIVIDER
QTY 1
LOWER CENTRE SHELF
QTY 1
UPPER CENTRE SHELF
QTY 1
CABINET SHELF
QTY 4
Front
/ Avant
Front
/
Avant
Front /
Avant
Front
/ Avant
Front
/
Avant
V16-BLV16-A
V16-DRV16-DLV16-C
V16-GV16-FV16-E
8
Part Description
Pre-Assembly Information Model # AXCRACA17-BRU

BACK PANEL
QTY 1
BACK PANEL
QTY 1
LEFT BACK PANEL
QTY 1
DOOR (L&R Same)
QTY 2
DRAWER FRONT
QTY 2
LEFT DRAWER SIDE
QTY 2
RIGHT DRAWER SIDE
QTY 2
DRAWER BACK
QTY 2
DRAWER BOTTOM
QTY 2
RIGHT BACK PANEL
QTY 1
Warning
Label
BOTTOM SUPPORT LEG
QTY 1
V16-JLV16-IV16-H
V16-LV16-KV16-JR
V16-NV16-MRV16-ML
V16-PV16-O
9
Part Description
Pre-Assembly Information Model # AXCRACA17-BRU

1 2 3
4 5
ALLEN KEY SCREW
M6 X 30 mm
QTY 26
CAM LOCK PIN
CAM LOCK
QTY 20 SETS
PHILLIPS MEDIUM SCREW
M3 X 15 mm
QTY 8
MAGNET and PLATE
QTY 2 SETS
PHILLIPS SCREW ROUND HEAD
M4 X 15 mm
QTY 24
ALLEN KEY
QTY 1
PHILLIPS SHORT SCREW
M3 X 12 mm
QTY 12
SHELF SUPPORT
QTY 30
10
6
7 8 9
Required -
Flathead screwdriver
Phillips Screwdriver
Not Included
HANDLE
M4 X 25 mm - QTY 2
M4 X 15 mm - QTY 2
QTY 4 SETS
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
11
b. M4 X 15 - QTY 1
( )1 is extra
a. M4 X 25 - QTY 2
c. M4 X 25 - QTY 1
PHILLIPS SCREW
M4 X 30 mm
QTY 4
10
Hardware Description
Pre-Assembly Information Model # AXCRACA17-BRU

Front / Avant
Front / Avant
Front
/
Avant
Front
/ Avant
Front
/
Avant
Fr
ont /
Avant
V16-A
V16-JR V16-H V16-JLV16-DL V16-DRV16-BL V16-BR
V16-K V16-KV16-C
V16-N V16-P
V16-ML V16-O V16-L
V16-MR
V16-G V16-GV16-E
V16-F
V16-I
11
Components - Key Diagram Model # AXCRACA17-BRU

Step 1
Step 2
2
1. Slide Drawer Bottom V16-O firmly into slots on Drawer Sides V16-ML , V16-MR
and Drawer Front V16-L .
2. Align Cam Lock Pins with guide holes and attach Drawer Sides V16-ML , V16-MR .
1. Attach 4 Cam Lock Pins 2 to back of Drawer Front V16-L .
4. Use flathead screwdriver to secure Cam Locks.
3. Insert 2 Cam Locks 2 into guide holes on each Drawer Side V16-ML , V16-MR .
V16-ML
V16-L
V16-MR
V16-L
V16-MR
V16-ML
V16-L
V16-MR
V16-ML
V16-O
12
Assembly Model # AXCRACA17-BRU

Step 3
1. Use Phillips Screwdriver to attach Handle 9 to Drawer Front V16-L .
Repeat Step 1-4 for the second drawer.
Step 4
NOTE: The screwdriver is not
included in the hardware pack.
9
1
3
3. Use Allen key 3 to tighten. Do not over tighten.
2. Attach back using 2 Allen Key Screws 1 through guide holes on each side.
1. Align Drawer Back V16-N with Drawer Bottom V16-O and press firmly into slot .
V16-L
V16-MR
V16-ML
V16-O
V16-N
V16-L
13
Assembly Model # AXCRACA17-BRU

Step 5
Step 6
3. Insert 6 Cam Locks 2 into guide holes on Lower Centre Shelf V16-E .
2. Align Cam Lock Pins with guide holes and attach Lower Centre Shelf V16-E .
4. Use flathead screwdriver to secure Cam Locks.
1. Attach 3 Cam Lock Pins 2 into pre-drilled holes on each Divider V16-DL , V16-DR .
2. Use Allen Key 3 to tighten screws. Do not over-tighten.
1. Attach Dividers V16-DL , V16-DR to Bottom Shelf V16-C using 6 Allen Key Screws 1
through guide holes.
2
Front
/
Avant
Front
/
Avant
Front / Avant
Front
/
Avant
Front
/ Avant
1
3
V16-E
V16-DL
V16-DR
V16-DR
V16-DL
V16-C
14
Assembly Model # AXCRACA17-BRU

Front
/ Avant
Front / Avant
Step 7
2. Align Cam Lock Pins with guide holes and attach Bottom Shelf V16-C .
4. Use a flathead screwdriver to tighten Cam Locks into Pins.
1. Attach 3 Cam Lock Pins 2 into pre-drilled on each Side V16-BL , V16-BR .
3. Insert 6 Cam Locks 2 into guide holes on Bottom Shelf V16-C .
2
Front /
Avant
Front
/
Avant
Front
/ Avant
V16-C
V16-BL
V16-BR
V16-DL
V16-DR
15
Assembly Model # AXCRACA17-BRU

Front
/ Avant
Front /
Avant
Step 8
1. Use 12 Allen Key Screws 1 attach Top V16-A to Sides V16-BL , V16-BR and
Dividers V16-DL , V16-DR .
2. Use Allen Key 3 to tighten screws. Do not over-tighten.
1
3
1
3
Front /
Avant
Front / Avant
Front
/
Avant
V16-BL
V16-BR
V16-C
V16-A
V16-DL
V16-DR
16
Assembly Model # AXCRACA17-BRU

2. Use Phillips screwdriver to tighten screws. Do not over-tighten.
1. Attach Bottom Support Leg V16-P to Bottom Shelf V16-C using 4 Phillips Screws 10 .
Step 10
Front
/ Avant
Step 9
10
Front
/ Avant
Warning Label
4
1. Attach Back Panels V16-H V16-I V16-JL V16-JR to back of TV Stand
using Phillips Screws Round Head 4 through guide holes.
2. Use Phillips screwdriver to tighten screws. Do not over-tighten.
Note:
The back of the tv frame does not have pre-drilled holes to attach the back panels.
V16-PV16-C
V16-BL
V16-BR
V16-A
V16-JRV16-JL V16-I
V16-H
17
Assembly Model # AXCRACA17-BRU

Step 11
- Using Phillips screwdriver to attach Screws 6 at middle hole of hinges for both top &
- Adjust the door to ensure they are aligned straight & square with bottom shelf & side.
into pre-drill holes:
1. Attach hinges on Doors V16-K to Sides V16-BL , V16-BR using Phillips Screws 6
4. Use Phillips screwdriver to attach Handles 9 to Doors V16-K through guide holes.
bottom hinges.
holes on hinges).
pre-drilled holes on Doors V16-K .
2. Attach Magnet Plates 8 to bottom corner of Doors V16-K using Phillips Screws 7 into
- Using Phillips screwdriver to tighten the rest of screws 6 into pre-drill holes ( top & bottom
3. Attach Magnets 8 using Phillips Screws 7 into pre-drilled holes on Bottom Shelf V16-C .
First Step Last Step ( after adjust the door )
9
7
8
8
7
6
6
6
V16-K
V16-K
V16-BL
V16-BR
V16-C
18
Assembly Model # AXCRACA17-BRU

Step 12
shelf level 1
shelf level 2
shelf level 3
shelf support
anti - tipping
5
5
1. Use 4 Shelf Supports 5 for each Shelf V16-F , V16-G in desired location .
tipping restraint.
2. 2 Shelf Supports 5 may be used on back top of each Shelf V16-F , V16-G as a
V16-G V16-GV16-F
19
Assembly Model # AXCRACA17-BRU

Step 13
1. Insert assembled drawers into glides on assembled TV
20
Assembly Model # AXCRACA17-BRU