Simpli Home Wyndenhall Brooklyn + Max 3AXCART-03 User manual

ARTISAN HOLDEN STRATFORD//
DRESSER
MODEL # 3AXCART-03
1/18

DO NOT RETURN
FOR REPLACEMENT PARTS OR OTHER INQUIRIES
PLEASE CONTACT US AT:
simpli home.com/customer-support-
PLEASE ENSURE TO HAVE THE MODEL #
FROM THE PACKAGING OR
INSTRUCTION BOOKLET
2/18

IMPORTANT : Please read this manual carefully before beginning
.assembly of this product Keep this manual for future reference.
SAFETY INFORMATION
CARE and MAINTENANCE
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by children
and pets. Keep children and pets away during assembly. To avoid danger of
suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. We do not recommend the use of power tools for assembly as this
could damage the unit. Only use manual tools.
May require 2 people for ease of assembly.
To clean, use a soft or slightly damp cloth, then wipe with a clean, dry cloth.
Dust with soft dry cloth.
Do not use ammonia-based cleaning products, as they will damage the finish.
Do not leave liquids or damp cloths on this furniture.
To avoid dulling of the finish, do not place furniture in direct sunlight.
Please inspect and tighten all screws or bolts on a regular basis to ensure proper
performance and safety of your item.
3/18

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 5 pm EST)
PRE ASSEMBLY INFORMATION-
A
PARTS DESCRIPTION
TOP
QTY 1
TOP SHELF
QTY 2
BOTTOM SUPPORT LEG
QTY 1
DRAWER SIDE
QTY 4 PAIRS
DIVIDER
QTY 1
BACK PANEL
QTY 1
DRAWER FRONT
QTY 2 PAIRS
RIGHT SIDE
QTY 1
BACK PANEL
QTY 1
FLIP DOWN DOOR
QTY 1 PAIR
LEFT SIDE
QTY 1
BOTTOM FRAME
QTY 1
B C
D
G
J
E
H
K
F
I
L
4/18
Front
Back
Front
Back
Front
Back
MODEL # 3AXCART-03
MN
DRAWER BOTTOM
QTY 4
DRAWER BACK
QTY 4

1
PRE ASSEMBLY INFORMATION-
HARDWARE DESCRIPTION
243
56
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 5 pm EST)
8
7
910 12
11
ALLEN KEY SCREW
M6 X 30 mm
QTY 22
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 24
M4 X 25 - QTY 1
HANDLE
M4 X 25 mm
QTY 6 SETS
PHILLIPS SCREW
M4 X 30 mm
QTY 4
PHILLIPS SCREW
M4 X 15 mm
QTY 12
ALLEN KEY
QTY 1
LATCH
QTY 2 SETS
CAM LOCK PIN
CAM LOCK
QTY 16 SETS
PHILLIPS SCREW
M3 X 15 mm
QTY 8
a.
b.
c.
M4 X 15 - QTY 1
M4 X 25 - QTY 1
TIPPING RESTRAINT
QTY 1 SET
5/18
Required -
Flathead screwdriver
Phillips screwdriver
Not Included
PLASTIC JOINING STRIP
QTY 1
ALLEN KEY BOLT
M6 X 30 mm
QTY 24
MODEL # 3AXCART-03

COMPONENTS – KEY DIAGRAM
6/18
MODEL # 3AXCART-03

ASSEMBLY
1. Attach 4 Cam Lock Pins 3 to pre-drilled holes at back of Drawer Front K .
2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides L .
3. Insert 2 Cam Locks 3 into pre-drilled holes on each Drawer Side L .
4. Use flathead screwdriver to secure Cam Locks.
1. Slide Drawer Bottom N firmly into slots on Drawer Sides L and Drawer Front K .
STEP 1
STEP 2
7/18
MODEL # 3AXCART-03

ASSEMBLY
1. Align Drawer Back M with Drawer Bottom N and press firmly into slot .
2. Attach Drawer Back using 2 Allen Key Screws 2 through pre-drilled holes on
each Side L .
3. Use Allen Key 5 to tighten screws. Do not over-tighten.
1. Use Phillips screwdriver to attach Handle 4 to Drawer Front K .
STEP 3
STEP 4
8/18
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # 3AXCART-03
Repeat Step 1-4 for the other three drawers.

ASSEMBLY
STEP 5
1. Attach Bottom Frame B to Divider F using 3 Allen Key Screws 2 .Tighten Screws 2
by Allen Key 5 .
2. Attach Top Shelfs C to Divider F using 6 Allen Key Bolts 1 ( 3 Bolts / each Shelf ).
3. Use Allen Key 5 to tighten bolts. Do not over-tighten.
MODEL # 3AXCART-03
9/18

ASSEMBLY
STEP 6
1. Attach Top Shelfs C and Bottom Frame B to Sides D & Side E using 12 Allen Key
Bolts 1 through indicated holes ( 6 Bolts / each Side ).
2. Use Allen Key 5 to tighten bolts. Do not over-tighten.
3. Attach Bottom Support Leg I to Bottom Frame B using 4 Phillip Screws 7 .
10/18
NOTE: The screwdriver is not
included in the hardware pack.
MODEL # 3AXCART-03

ASSEMBLY
STEP 7
1. Attach Top A to Side E and Side D using 6 Allen Key Bolts 1 ( 3 Bolts / each part ). Use
Allen Key 5 to tighten bolts.
2. Attach Top A to Divider F using 3 Allen Key Screws 1 .
3. Use Allen Key 5 to tighten screws. Do not over-tighten.
11/18
MODEL # 3AXCART-03

ASSEMBLY
STEP 8
12/18
MODEL # 3AXCART-03
1. Attach the upper Back Panel G to back frame by using Phillips Screws 6 . Only 1 top
st
row of screws ( 7 Screws ) to be screwed in advance.
2. Insert the lower Back Panel H into the slot of Plastic Joining Strip 11 .
3. Insert the entire set of Step 2 into bottom edge of upper Back Panel G and tighten by
screws 6 .

ASSEMBLY
STEP 9
13/18
NOTE: The screwdriver is not
included in the hardware pack.
1. Attach hinges on Top Shelf C to Flip Down Door J using Phillips Screw 10 .
2. Attach Latch 9 to Divider F and Flip Down Door J using Phillip Screws 8 into guide
holes.
3. Use a Phillips screwdriver to attach Handles 4 to Flip Down Door J through pre-drilled
holes.
MODEL # 3AXCART-03

ASSEMBLY
STEP 10
14/18
MODEL # 3AXCART-03
1. Insert assembled drawers into glides on assembled table.

ASSEMBLY
NOTE: Injuries and damage can occur from furniture tip-over. It is important to use the
safety bracket included. If the tipping restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the furniture.
15/18
STEP 11
NOTE: The screwdriver is not
included in the hardware pack.
1. To attach Tipping Restraint 12 , follow instructions on Tipping Restraint package.
When you determined the location for your unit, install the Furniture Tipping
restraint. Carefully follow the instructions contained on the package.
MODEL # 3AXCART-03

WARRANTY
Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max
product. These products have been made to demanding, high-quality standards
and are guaranteed for domestic use against manufacturing faults for a period of
12 months from the date of purchase. This warranty does not affect your
statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.) please
contact us at our toll free service line at 1-866-518-0120 ext. 262 from 9 am to 5
pm, Monday to Friday, Eastern Standard Time or by email at
simpli-home.com/customer-support.
We reserve the right to repair or replace the defective product, at its discretion.
This product is guaranteed for 12 months if used for normal purposes. Any
warranty is invalid if the product has been overloaded or subject to neglect,
improper use or an attempted repair by other than an authorized agent. Heavy-
duty or daily professional/commercial usage are not guaranteed.
Due to continuous product improvement, we reserve the right to change the
product specifications without prior notice.
PLEASE NOTE: This item is hand-crafted and hand-finished with utmost care.
As such, variations and imperfections should be expected and should be
welcomed as the natural beauty of the wood.
16/18

Question, problems, missing parts?
Before returning please email Customer Support at
simpli-home.com/customer-support
or call
Customer Service at 1-866-0518-0120 ext. 262
Monday to Friday between 9 am – 5 pm EST
For more information visit us on our website
www.simpli-home.com
Like us on facebook
www.facebook.com/simplihomefurnishings
17/18

Upload an image of our furniture in your
home with a short review to our
facebook page and have a chance to
ENTER
TO WIN
Win your choice of any one of
Simpli Home furniture pieces
Free!!!
www.facebook.com/simplihomefurnishings
(draws monthly – shipping included)
(vanities not included)
18/18