Simplified Manufacturing MV2 User manual

MV2
VER 1.0

1
Thank you for purchasing this device
The Simplified Manufacturing MV2 is designed to provide years of
reliable service. At Simplified MFG, we want the experience with
this device to be the best possible and are committed to helping
achieve that experience.
Surge protection device recommended
This product contains sensitive electrical components that may
be damaged by electrical spikes, surges, electric shock, lighting
strikes, etc. Use of surge protection systems is highly
recommended in order to protect and extend the life of your
equipment.

2
Table of Contents
1. Introduction..............Error! Bookmark not defined.
2. Features ................................................................ 3
3. Package Contents ......Error! Bookmark not defined.
4. Specifications ......................................................... 4
5.Operation Controls and Functions.............................. 6
5.1 Front Panel .................................................... 6
5.2 Rear Panel..................................................... 7
6. Display Modes........................................................ 9
7. Remote Control .................................................... 10
8. Application Example.............................................122
9. Warranty……………………...........................................12
10.Contact…………………………..………………………………….13

3
1. Introduction
The MV2 is a “frameless” four inputs to two parallel outputs (1
HDMI & 1 VGA) switch that features the ability to process the inputs
into four different multi-view formats. Four 1080p inputs can be
shown simultaneously on a 4K display (up to 4K @30Hz.). In
multi-view mode, the analog audio output can be switched to output
any of the pictures in the multi-view.
1. Features
•“Frameless” instant switching
•Automatic resolution sensing/scaling
(480p~4K 30Hz., 800x600~4K30Hz.)
•HDMI1.4b/HDCP1.4 up to 10.2Gbps capable
•5 viewing modes
•HDMI output can be set to 5 different outputs including
720p, 1080p, and 4K @ 30Hz.
•VGA output can be set to 4 different outputs up to 1920 x

4
1200. Please note VGA will not support 4K
•Compact size
•Audio breakout is 3.5mm minijack (stereo)
•Control functions are via supplied remote and IR signals
and front panel switching
2. Package Contents
•1 x MV2 Switch with multi-view
•1 x 12V/1A DC Power Supply
•1 x IR Remote Control
•2 x Mounting brackets
•1 x User manual
3. Specifications
Technical
HDMI Compliance
HDMI 1.4b
HDCP Compliance
HDCP 1.4
Video Bandwidth
10.2Gbps

5
Video Resolutions
3840x2160@30Hz,1920x1080@50/60
Hz,1280x720@50/60Hz,1920x1200@6
0Hz,1024x768@60Hz
Color Depth
8-bit
Color Space
RGB, YCbCr 4:4:4, YCbCr 4:2:2
Analog Audio
Formats
LPCM2.0 44.1KHz 48KHz
ESD Protection
Human-body Model
：
±8kV (Air-
gap discharge) , ±4kV
(Contact discharge)
Connections
Inputs ports
4x HDMI Type A [19-pin female]
1x SERVICE [Micro USB, Update port]
Outputs ports
1x HDMI Type A [19-pin female]
1x VGA [VGA-D]
1x Audio [3.5mm Stereo Mini-jack]
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
185mm (W)×128mm (D)×20mm (H)

6
Weight
595g
Power Supply
Input: AC100~240V 50/60Hz, Output:
DC12V/1A
(US/EU standards, CE/FCC/UL
certified)
Power Consumption
7.68W (max)
Operating
Temperature
0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature
-20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity
20~90% RH (non-condensing)
5.Operation Controls and Functions
5.1 Front Panel

7
Number
Name
Function description
1
POWER
LED
The LED will illuminate green when the
unit is
working, red when the unit is in standby
mode.
2 IR
IR receiver window. It accepts the
remote control signal of this device only.
3
CH1/CH2/
CH3/CH4
button
Selects input channel button (Please see
“6. Display Modes” detail description).
4
MODE
button
Press this button to cyclical selection
display mode output (Please see “6.
Display Modes” detail description). Press
this button up to 5s, the output screen is
full screen and equal proportion display.
5
RES.
Cycling select different output resolution.
Press this button up to 5s to opening or
closing window display frame.
6
SERVICE
port
Firmware update used. (Manufacture use
only.)
5.2 Rear Panel

8
Number
Name
Function description
1
HDMI
INPUT
HDMI input ports for the four sources
that this device will switch/mulit-view
2
HDMI
OUTPUT
Connection for display up to 4K @ 30Hz.
3
VGA
OUTPUT
VGA output port that is in parallel with
HDMI output (does not support 4K)
4
AUDIO
OUTPUT
Analog audio output port. (Note: If the
HDMI output is MODE 1, the audio
output follows the video content. If the
HDMI output is MODE 2/3/4/5, press
CH1/CH2/CH3/CH4 up to 5s to selecting
audio output or using remote control to
cyclical selection audio output. The
default status is CH1 screen audio
output.)
5
DC 12V
Plug the 12V/1A DC power supply into
the unit and connected the adapter to an
AC outlet.

9
6. Display Modes
The MV2 has 5 display modes. Please see the below;
MODE 1: The MV2 will display each input separately. Press the
CH1/CH2/CH3/CH4 buttons on-panel or using IR remote control to
select the source. The LED indicators will indicate which source is
selected.
MODE 2: The MV2 divides four HD inputs into a “quad” view on the
screen. The LED indicator “4” is on. In the CH1 window, you can
press the CH1 button on-panel or use the remote control to cyclical
input position in the quad view. In the CH2 window, you can press
the CH2 button on-panel or use the remote to cycle input 2’s source,
etc. The rest can be done in the same manner.
MODE 3: The MV2 divides four HD inputs and display on a screen.
The LED indicator “4” is on. Operation method is the same as MODE
2.

10
MODE 4: The MV2 divides two HDMI inputs with same size and
display on a screen. The LED indicators CH1/CH2 light are on. In the
CH1 window, you can press the CH1 button on-panel or using IR
remote control the Source 1 button to cyclical selection four inputs
source. On the CH2 window, you can press the CH2 button on-panel
or using IR remote control the Source 2 button to cyclical selection
four inputs source.
MODE 5: The MV2 divides four HD inputs and
display on a screen. The LED indicator “4” is on.
Operation method is the same as MODE 2.
7. Remote Control
:Press to toggle power
: Press this button to open or close display
window to toggle positions with cycle button
RES. : Press this button to cycle through
output resolutions.

11
Mode:
: Press these buttons to select output display
mode.
Source:
1/2/3/4: Press these buttons to select the input source.
:Press this button to cycle the input source (This button can be
used only at the MODE 1).
Audio:
:Press this button to cycle input source audio(This button can be
used at the MODE 1 only).
Audio:
: Mute button.
:Press this button to cycle through audio output.

12
8. Application Example
9.Warranty
Should you feel that this product does not function adequately due to
defects in materials or workmanship, we (referred to as “the warrantor”)
will, for the length of the period indicated below (starting from the
original date of the purchase) either a) repair the product with new or

13
refurbished parts. Or b) Replace the product with new or refurbished
product. All Simplified MFG products are covered by a 3-year PARTS
and LABOR warranty. During this period there will be no charge for unit
repair, replacement of unit components or replacement of the product if
deemed necessary. The decision to repair or replace is made by the
warrantor. The purchaser must mail in the product during the warranty
period. This limited warranty only covers the product purchased as
new and is extended to the original purchaser only. It is
non-transferrable to subsequent owners, even during the warranty
period. A purchase receipt or other proof of purchase date is required
for the limited warranty service.
10.Contact
Sales and Tech Support:
P. 833-HDMI-411 (833-436-4411) E. [e-mail]
Simplified MFG • 550 W Baseline Rd Ste 102-121 • Mesa AZ 85210

Simplified MFG • 550 W Baseline Road Ste 102-121 • Mesa, AZ 85210 • www.simplifiedmfg.com • 833-HDMI-411 (436-4411)
MV2 Quick Start Guide
• The MV2 is a four input multi-view fast
switch
• The MV2 has HDMI, VGA, and Audio
outputs
• The MV2 is an instant switch making it great
for live performance, command and control,
or sports viewing
• The MV2 output can scale to: 1024x768,
1920x1200, 720p, 1080p, & 4K@30Hz.
• The MV2 is controlled via front panel
switches, IR, or with IR remote.
Legend
      HDMI
      AV Cat
      Network
      Audio Line
      Speaker
      Ir TX
      Ir RX
      RS232
Legend
      HDMI
      AV Cat
      Network
      Audio Line
      Speaker
      Ir TX
      Ir RX
      RS232
HDMI SourceHDMI Source
HDMI SourceHDMI Source
HDMI SourceHDMI Source
IR Ports
Single View/Side by Side/
Collaboration/Quad-View
HDMI
RS232
Sound BarSound Bar
Optical
Cat6/6A/7/8
EX1L shown
HDMI SourceHDMI Source
HDMI
HDMI
HDMI
HDMI
HDMI
Amp
Stereo

MV2
1080p Frameless Switch with 4K Multiview
• Instantaneous switching
• 4K output in quad mode
• Five output options
• Audio breakout (3.5mm mini-jack)
• HDMI and VGA outputs
• Compact design
• 3-Year Warranty
833-HDMI–411 (436-4411) • www.simplifiedmfg.com • 550 W Baseline Rd., Ste #102-121 • Mesa, AZ 85210
Specifications:
The MV2 is a compact 4 input to one
output “frameless” switch. The MV2
has 4 HDMI Inputs and 1 HDMI Out-
put. Switching can be accomplished
by included IR remote or with IR
commands from a third party control
system. Switching is instantaneous.
Output in quad mode is 4K. There
are five output modes; single view,
quad view, offset quad view, side by
side, and a collaboration view as well.
Features:
Technical
HDMI
Compliance HDMI 1.4b
HDCP
Compliance HDCP 1.4
Video Bandwidth 2.25Gbps
Video
Resolutions
In: 480i/p, 576i/p, 720p, 1080i/p, 800x600, 1024x768,
1280x720, 1920x1080
Out: 1080p and 4K 30Hz.
Color Space RGB, YCbCr 4:4:4, YCbCr 4:2:2
Color Depth 8 Bit
HDMI Audio
Formats LPCM 2 Channel
ESD Protection Human body model — ±8kV (air-gap discharge) & ±4kV
(contact discharge)
Connections
Inputs 4x HDMI Type A [19-pin female]
1x Micro USB Service port
Outputs
1x HDMI Type A [19-pin female]
1x VGA
1x 3.5mm [mini jack]
DC Power 1x 12V Screw Down connector
Mechanical
Housing Metal Enclosure
Color Black
Dimensions 185mm [W] x 128mm [D] x 20mm [H] 7.28”x 5” x .75”
Weight 595g /21 Oz.
Power Supply
Input: AC100 - 240V 50/60Hz
Output: DC 12V/2.5A (US/EU standards, CE/FCC/UL cer-
tified)
Power
Consumption 7.6W
Operation
Temperature 32 - 104°F / 0 - 40°C
Storage
Temperature -4 - 140°F / -20 - 60°C
Relative
Humidity 20 - 90% RH (no condensation)