GoMax Electronics SW-5004DE User manual

-1-
SW-5004DE
HDMI 4x1 Seamless Switcher with Quad-view support
User Manual
rev: 200713
Made in Taiwan
-1-
TABLE OF CONTENTS
INTRODUCTION....................................................................................................................2
FEATURES ............................................................................................................................2
PACKAGE CONTENTS..........................................................................................................2
SPECIFICATIONS..................................................................................................................3
PANEL DESCRIPTIONS........................................................................................................4
CONNECTION DIAGRAM......................................................................................................5
OPERATION APPROACH......................................................................................................6
WARRANTY.........................................................................................................................11

-2-
INTRODUCTION
The SW-5004DE HDMI 4x1 Seamless Switcher with Quad-view support provides the most flexible and
cost effective solution in the market to route high definition video source from one of the four HDMI
sources to the remote display in real time. This solution can be utilized in digital signage, conference
room presentation systems or other similar applications. In addition,
With 1080p output resolution, users can display the resulted mixed video with improved
presentation quality. In the meantime, the unit can be controlled thru the IR remote control, front
panel button or software control to provide the most flexible control way to fit into any applications.
FEATURES
4x HDMI inputs and 1x HDMI output
Input resolution support from 640x480 to 1920x1200, interlaced or progressive
Output resolution supports up to 1920x1080
Supports seamless switching
Supports HDCP 1.4
Firmware upgradable for support of new features and technology enhancements
Supports IR remote control
The output display is forced to layout
This switcher can control by RS-232, push button and IR remote control
PACKAGE CONTENTS
1x SW-5004DE
1x DC 12V 5A
1x Installation software CD
1x User Manual
1x IR Remote control (15 keys)
1x IR Receiving cable
-3-
SPECIFICATIONS
Model Name
SW-5004DE
Technical
Role of usage
Seamless Switcher
HDCP compliance
HDCP 1.4
Video bandwidth
6.75Gbps
Input Video Support
Up to 1920x1200@60
Output Video Support
720p60, 1080i60, 1080p60
Audio support
Bypass
Control
Software / Front Panel / IR Remote Control
Input TMDS signal
1.2 Volts [peak to peak]
ESD protection
Human body model —±15kV [air-gap discharge] & ±8kV [contact
discharge]
Input
4x HDMI + 1x RS-232 + 1x Ethernet
Output
1x HDMI + 1x 3.5mm(Stereo)
HDMI connector
Type A [19-pin female]
RJ-45 connector
WE/SS 8P8C with 2 LED indicator
RS-232 connector
DE-9 [9-pin D-sub female]
Mechanical
Housing
Metal enclosure
Dimensions
[L x W x H]
Model
312 x 143 x 27mm [1' x 5.6" x 1"]
Package
376 x 240 x 112mm [1'2" x 9.4" x 4.4"]
Carton
590 x 510 x 405mm [1'9" x 1'7" x 1'3"]
Weight
Model
808g [4.6oz]
Package
1385g [3lbs]
Power supply
12V 5A DC
Power consumption
10 Watts [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]

-4-
PANEL DESCRIPTIONS
1. Input Selection Button: Input 1~4 source selection (from the left to the right is input 1, input 2, input
3, and input 4). If you press the input 1 button about 5 seconds, the output layout will change to
Quad-view mode ( ).
2. IR SENSOR: IR sensor for receiving the IR commands from IR remote
3. IR Receiver: 3.5mm socket for plugging in the extension cable of IR receiver
4. Input 1-4: HDMI inputs (from the left to the right is input 4, input 3, input 2, input 1)
5. RS-232: RS-232 control port
6. Stereo Audio Out: Connect to analog stereo audio speaker
7. Output: HDMI output
8. Ethernet: Ethernet control port
9. Factory Reset: Switch the pin to do factory default reset
10. +12V DC: 12V DC power jack
For Quad-view mode, Upper left is Input 1; Rright upper is Input 2;
Lower left is Input 3; Right lower is Input 4.
!
-5-
CONNECTION DIAGRAM

-6-
OPERATION APPROACH
Method A: IR Remote Control
Button
Function
POWER
Power on/off the device
INFO
Display input/output/audio information of device
MUTE
Turn off output’s video and audio
Fade
Fade switching effect
Dissolve
Dissolve switching effect
Seamless
Seamless switching effect
Audio
Select audio channel
Quad
Change the output layout to
1080p
Select 1080p@60 output resolution
1080i
Select 1080i@60 output resolution
720p
Select 720p@60 output resolution
Input 1
Select HDMI input 1 to be the input source
Input 2
Select HDMI input 2 to be the input source
Input 3
Select HDMI input 3 to be the input source
Input 4
Select HDMI input 4 to be the input source
Method B: Software Control through RS-232 port
1. System Requirement
(1) OS information : MS Win XP/7/8/10
(2) Baud rates: 115200
(3) Software size: 7MB
(4) Minimum RAM requirement: 256MB
2. Control interface
When clicking on the software control program, the following dialog will pop-up (under Microsoft
Windows 7, please run as administrator).
RS-232 serial Mode: Use RS-232 to connect the port on device and computer. Select correct COM
port and click the Connect button.
Ethernet Mode: Enter the IP address of the device and click the Connect button.
After the software control setting is accomplished, it will enter directly to the control interface.
-7-
1
Mapping
2
System
3
Port Setting
(1) Mapping
You can assign arbitrary video source and output type here. We provides three switching
effects for user select and you also can set the output resolution. When clicking output type
(quad-view, focus left, focus right) button, it will change the window sequence. Aspect ratio
function can decide aspect ratio of output (ON: original proportion, OFF: 16:9).
1
2
3

-8-
(2) System
MAC Address
Display the device’s MAC address information
Network Setting
User can use the Ethernet to control the switcher. Firstly, user should click on the “IP
Setting” button to setup network set. Next, users can setup the Ethernet for the unit as
below example shows. After the step of IP setting, please click the “Apply” button.
*If you click the DHCP Enable button, it will automatically get the IP address.
Factory Reset
Click Factory Reset button to do factory default reset.
The process of default reset will take about 25 seconds.
-9-
Firmware Version
Get the firmware version information.
Firmware Update
Firmware update device
Please select the correct COM port or click “Scan” button to connect device.
Click “update” button to do firmware update.

-10-
If you want to change OSD font, please click “OSD Font Update” and “update”
button to change it.
(3) Port Setting
The function can reconnect this device. You can click button to update the control
connection. A “Port Setting” window will pop up for you to select the approach to connect
this device.
-11-
WARRANTY
The SELLER warrants the SW-5004DE HDMI 4x1 Seamless Switcher with Quad-view support free
from defects in the material and workmanship for 1 year from the date of purchase from the SELLER or
an authorized dealer. Should this product fail to be in good working order within 1 year warranty period,
The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to
accident, disaster, abuse or any unauthorized modifications including static discharge and power
surge. This warranty is offered by the SELLER for its BUYER with direct transaction only. This warranty
is void if the warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the current price of
parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of
reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume
the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a return
authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations,
any other implied warranty or fitness or merchantability for any particular purpose, all of which are
expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are
responsible for shipping charges to and from the SELLER. Cables and power adapters are limited to a
30 day warranty and must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However,
The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual. The
SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting
from any defect or omission in this manual, even if advised of the possibility of such damages. Also,
the technical information contained herein regarding the SW-5004DE features and specifications is
subject to change without further notice.