ZyXEL Communications GS1300 Series User manual

2
IMPORTANT!
READ CAREFULLY BEFORE USE.
KEEP THIS GUIDE FOR FUTURE REFERENCE.
More Information
https://businessforum.zyxel.com
support.zyxel.com

3
Document Conventions
Warnings and Notes
Warnings tell you about things that could harm you or your device.
Syntax Conventions
Icons Used in Figures

4
Table of Contents
Document Conventions ......................................................................................................................3
Table of Contents.................................................................................................................................4
Chapter 1
Getting to Know Your Switch ..............................................................................................................5
Chapter 2
Hardware Installation and Connection .............................................................................................8
Chapter 3
Hardware Panels................................................................................................................................13
Index...................................................................................................................................................31

5
CHAPTER 1
Getting to Know Your Switch
1.1 Introduction
1.2 Example Applications
1.2.1 PoE Example Application
FEATURE GS1300-10HP GS1300-18HP GS1300-26HP

6
Figure 1
1.2.2 Backbone Example Application

7
Figure 2
1.2.3 Bridging / Fiber Uplink Example Application
RD Sales
Figure 3

8
CHAPTER 2
Hardware Installation and
Connection
2.1 Installation Scenarios
Installation Requirements
WARNING! Failure to use the proper screws may damage the unit.
WARNING! The surface of the Switch could be hot when it’s functioning.
Do NOT put your hands on it. You may get burned.
WARNING! This Switch is not suitable for use in locations where children
are likely to be present.
2.2 Wall Mounting
2.2.1 Installation Requirements

9
1
2
WARNING! Be careful to avoid damaging pipes or cables located inside
the wall when drilling holes for the screws.
3
4
5

10
WARNING! The Switch should be wall-mounted horizontally, and make sure
the front panel is facing down. The Switch's side panels with ventilation slots
should not be facing up or down as this position is less safe.
2.3 Rack Mounting
2.3.1 Installation Requirements